Next Video Idea: Can you make a coaster better than Daddy Pig?

a perfect example of this is Furius Baco at Port Aventura, which is exactly 15 meters and offers a seriously powerful launch (since it's an Accelerator) and airtime (since you immediately go DOWN after the launch instead of up). yeah, it's kind of a rough ride, but it 100% fits the criteria

Hey, I love this coaster you made! I got a few challenge ideas myself: -Make the best, most compact thrill coaster you can with over 1000 meter (at the very least 3000 feet) of track - Do a challenge park series like JLW games -Make the shortest best coaster possible that reaches 15+ inversions -Make the thinnest thrill coaster you can Keep up the great content!

A few ideas I've had: 1. Making a compact indoor coaster within a limited footprint such as x/walking dead or rock n roller coaster etc. 2. What a ride would look like if it was themed or designed differently. I.e. what other layouts it could have / how the layout could be improved 3. Similar to 2, what rides would look like if their layouts were extended. I.e. how swarm might be extended past the mid-course or could you add an inversion to stealth etc. Look forward to your next video as always!

I'd actually like to see some of these challenge coasters get brought into one park. edit: Actually, I'm gonna do this myself. These are some pretty great layouts! My challenge suggestion would be a terrain hugging B&M flying coaster with a full on Pretzel Loop and at least one other inversion.

I think Alton Towers will be good at this challenge.

Locals: "We dont want Alton Towers to be too noisy" Alton Towers: *Blows holes in the earth with TNT*

Yes, as long as you can use magnetic speed boosters along the track.

These videos are awesome and I love to watch them! you should do a video of you spinning a wheel and let the wheel decide what coaster to make, the inversions, the height of the coaster, and so on :)

here’s a idea, make a rollercoaster where the height never changes!

I’ve started my own parks series because you inspired me so much

Backlot Stunt Coasters at Kings Island, Kings Doninion and Canada's Wonderland stand at 45ft

I have a good challenge for you. Design the smoothest coaster you can without using any mods

Awesome! Great work!

Hey, first of all, I would like to say that this has really become a masterpiece and you have done it extremely well. I also wanted to ask how you do that with the forward and backward smoothing in the roller coaster.I also have an idea for a challenge. - You could build a roller coaster with the maximum height and depth but still smooth enough to look good

Make a thrill coaster bout of a wild mouse could even be the new wild moose rmc concept

Here’s a good one for you: Make what you think B&M would build if they were tasked to make a family thrill sitdown!

Yeah it’s called furious baco

Really loving your channel, especially these types of videos. I really liked the What if Rita was designed in 2023, maybe you should do more like that. What if Wickerman was an RMC? What if stealth had a layout. Idk just like marvel what if but for theme parks lol. Btw when's the new series, i loved wonder world and i bet this is gonna be so much better.

Maybe next challenge would be a 500 foot lift hilll and break inversion record… with a B&M stand up?

Wow, this is so cool, i like, very good video man :)

Thats a nice challenge. might have to try

Indoor coaster at towers next

Dragon's Fury at Chessington is 51 ft tall. And Revolution at Blackpool Pleasure Beach is 56 ft. So, they're close.

8:51 an s-hill, not even kidding

Do you use the 2m method to smooth the whole ride?? It looks amazing!!! And how do you get the white area/ background. Stunned for words 🔥

Tip: when recording povs you can use the millienium force trains and it comes out wayyy smoother(you will have to change the friction controls though cuz it will be much faster)

I got an idea you can do, if an arrow hyper was designed today

Video idea, the perfect coaster from (whatever manufacturer you’d pick)

3:31 yes, nemesis has a max height of 13 meters

How do you do the white background on these? I’ve been trying to figure that out for solo coaster presentations. Is it a setting in reshade?

Alton Towers have been doing this for years

Challenge Idea. Design an extreme spinner coaster for Thorpe Park.

Challenge idea: You should do the box type of video like from silverrat

the clound one you were talking about is beyond the cloud and has the worlds fastest inversion

Idea: Make a shuttle coaster with a Jojo roll.

Steel Topped hybrid within a grid 20x10 space. But it has to seem like it was a conversion and not a ground up

Challenge: make the best compact coaster from intamin or rmc. Also there are to many inversions for it to be a thrill, aka it's an extreme coaster. Have you seen theme park wirrals nemesis video?

For some reason this ride reminds me of like a mini maverick in some of the transitions and inversions

I have a dumb question. I play console bc I don't have a PC. Is there a way to use different tracks or cars for different coasters? I really want to dip into an intamin launch or a vekoma style coaster but I'm limited to what I can do.

Just a question: Why do you put drive tires beafore the launch section?

gonna do this challenge while watching this video cause why not

how did you get the backround completely white?

Basciyl all phantasialand coasters

How do you make the Cinematic & POV the way you do?

Nemesis right now: 😤

What if Goliath at Walabi Holand was built in 2023?

What mod do you use to make everything white and empty around the coaster?

What mods do you use to make the camera so smooth?

You should do a nemesis 2.0

The only thrill coaster under 50 feet that I know of is Furius Baco at PortAventura, a truly bizarre Intamin contraption.

How do you make/get the white background?

How did u get the blank map at the end

Since your the dev, I have a suggestion, since remaking coasters like Kingda Ka or Top Thrill Dragster can't be very accurate, because the hydraulic launch coaster at least the zenith one, has top hat pieces, which is cool, but, the going into top hat should have a taller preset option, like, 230 ft. Then, we should be able to have a part that rotates 90 or -90 degrees then to go over the top hat, because currently we have going in / out of top hat, straight pieces, spiral up / down and going over and tats all. But Kingda Ka nor Top Thrill Dragster really ever went 90 degrees straight up. So, maybe consider this. Like look at these 2 Pov's of the real TTD kzfaq.info/get/bejne/sMyqmdKB2qjLlpc.html and the planet coaster one: kzfaq.info/get/bejne/gMyWdZifzKuoqWw.html Notice how the real one goes up into the top hat, rotates, then goes over? The planet coaster goes into top hat, goes STRAIGHT UP for most of the time, which is totally inaccurate, I'd like to see this as a change or addition to the top hat making. which would be 3 new pieces, mainly. Up into top hat, but it's like 230ft then a rotate piece, since it doesn't go straight up, and a TOP hat piece, the piece that goes over without rotation.

what is the smooth forward button you have?

how do you make the background in POV's to be all white?

How you do for rotate and move a piece of track at the same time?

Alton towers has joined the chat

Idk, ask Rita

can you do a vid on how to download the smoothing mod

Can you build a coaster using RNG and random wheels and stuff Maybe rmc or b&m invert. Like Theme Park Wirral's video (

How do i get the smooth forwards and backwards thing?

You’re not doing it right it needs to be 100ft underground and have 20 inversions for alton towers to approve it🤓

Anyone know if you can get the white background effect on console, I know it has something to do with the fog settings?

Hmmm… DRAYTON MANOR 2024!? 🧐

niceeeeeeeeeee

Doesn’t this exist with Nemesis?

Hi Corvus

Can you build king da ka

Isn’t Furious Bako under 50ft?

Don’t take this the wrong way, but please fix your smoothing. I know planco smoothing is hard, but watching a pov of any slc doesn’t hurt my eyes as much as this one. Again, no offense, I know this smoothing method takes a lot of time, but it isn’t supposed to look like that.