Can You REMOVE the HEAD of a Ti-Bone 3 Stiletto Hammer?

Рет қаралды 5,967

Жыл бұрын

After watching KZfaq shorts the other day I came upon a video comparing the new Martinez hammer alongside the new TBIII Stiletto Hammer. It was mentioned that the Ti-Bone 3's hammer face/head could not be removed. Challenge accepted! Armed with my tools, my wit, and my 15oz TBIII Stiletto Hammer I will find out if it is possible to remove the face of this tool!
Support me on Patreon: / dylan_taylor
My Etsy:
goo.gl/tcgeYd
Please Leave a comment about what you'd like to see next!
--------MY GEAR---------
My First wood burner: amzn.to/2zQRXz1
Favorite Wood Burner: amzn.to/2AC9GMq
Favorite Wood Glue: amzn.to/2youG31
RazerTip Wood Burner: amzn.to/2AC9GMq
Camera: amzn.to/2yoPFmv
Computer: amzn.to/2BhGqKv
Favorite Tripod: amzn.to/2C3f9rJ
Favorite Hearing Protection: amzn.to/2BlRmGK

Пікірлер: 30

@Thayer2000 Жыл бұрын

That was Great! Nice work conquering that job! and Merry Christmas!

@DylansDIYWorkshop Жыл бұрын

Thank you! It was a task that I thought would be easier than it was. Merry Christmas to you too!

@Giorgio_Rampa 11 ай бұрын

Thanks man! This actually worked and funny enough, we tried everything else you did in the video lol!!

@RemiFlores-ng8vi 3 ай бұрын

Thanks for the help i just barely replaced mine.

@jchan0425 10 ай бұрын

Thank you so much for this video.

@jakeklassen3702 Жыл бұрын

Hey Dylan, find the appropriate torx bit and put it in a normal impact. That’s how I did it when I was a carpenter. Plus I believe from factory they come with blue locktite on the threads.

@DylansDIYWorkshop Жыл бұрын

Their website says, The new ones are 7/32 Hex. And they have 2 lock washers and that you shouldnt use an impact because somehow the impact tightens the lockwashers.

@alexanderburdick7108 Жыл бұрын

That was awesome! Thanks....

@markraouf6976 5 ай бұрын

dude , you're a fucking Legend One hell of a Hack Applause

@kickyourfaceandlaugh607 Жыл бұрын

You could have claws of another hammer for leverage on the Allen key.

@correfe 22 күн бұрын

What is the length of that screw?

@jonathanreeves4700 Ай бұрын

Guys. If it's got blue loctite, or you suspect it's got blue loctite, you need to hit it with some heat from a heat gun or torch. And things like this always have blue loctite.

@daisym3598 Жыл бұрын

How is the rubber grip holding up? I spoke to Stiletto and was told below: we do not re-grip the Stiletto handles. Regripping the hammers is not an option for repair. The options will be to send in your hammer for evaluation. Once the hammer is evaluated a technician will reach out with the below options. • Replace under warranty • Offer a new replacement at prorated cost. ( this decision is determined once the hammer has been evaluated) • Offer a new hammer a cost. All Stiletto products are covered by a one-year warranty against defects in materials and workmanship, with proof of purchase. During the warranty period, Stiletto will replace or repair a defective product with a new or reconditioned part or product, depending on the availability at the time of replacement.

@DylansDIYWorkshop Жыл бұрын

The grip has held up so far. Although I havent had it a month yet. if you read on their website what tjeir hammer is aupposed to be used for most of the things youre hitting if youre doing demo or renovation, you voided the warranty

@mamaschmeeda Жыл бұрын

Great Job ❤

@DylansDIYWorkshop Жыл бұрын

thank you!

@cackmuffin 10 ай бұрын

Any ideas what to do if you have a stripped bolt head? My lead guys hammer is stripped in there and I want to help him get it free without damaging the hammer

@DylansDIYWorkshop 10 ай бұрын

is it badly damaged enough that a brand new quality hex key isnt going to fit in it?

@cackmuffin 10 ай бұрын

@@DylansDIYWorkshop yes we tried a new one theres nothing left to grab

@tooljunkie555 Жыл бұрын

Thts a good way to do it..was gonna say try some heat and /or wd40 but yea tht way worked really well! Good tip!

@DylansDIYWorkshop Жыл бұрын

Hey Joe! its been a long time. How are you doing? I didnt really want to add any heart to it as I dont understand titaniums properties when heated. If it made it more brittle, I wouldnt want a hammer that is apt to explode when I use it lol.

@kadenoberhaus3866 Жыл бұрын

You’re a gangster thank you for this I’m ngl I bought the tb3 and was very worried I wouldn’t be able to get the head off due to everyone saying it’s impossible

@DylansDIYWorkshop Жыл бұрын

Precisely why I did the research and spoke to the tool repair section of my local tool store; to be able to share it with everyone on this video!