Thanks for the vid! Probably making the purchase for my doors here soon.
@kd757t2 жыл бұрын
Thank you for your video, great info. I just bought a 2020 Sport RC that came with the door upper hardware already installed. But when I drop in the upper section it doesn't feel like it fits correctly, specially at the "A" pillar where it pivots when you open the door. Install seams easy enough: drop in, install pins & clips, done... but it doesn't feel right when you open the doors. I don't want to screw them up because they're too expensive. I hate to ask but could you do a follow up video on any tips you may have on dropping in the door tops and how they look when opening & closing the door. Thank you for your help.
@ukwildcats099 ай бұрын
Did you ever figure it out? I'm installing it now and i'm in the same boat you are.
@kd757t9 ай бұрын
@@ukwildcats09 no I haven't really had a chance to work on it any further. I did try to loosen the mounting screws & slightly slot the holes on the top of the door where the frame pins fall into hoping to better the geometry at the A pillar when you open the door but no luck fixing the problem.
@jonbeauchamp1563 жыл бұрын
Looks just like my machine once I get my upper doors on. What kind of fender flares are those? Canam instructions should also say check youtube
@robshaw49653 жыл бұрын
I honestly don’t know. They were on the machine when I bought it
@drewp7781 Жыл бұрын
Thanks for uploading the video. How are the windows holding up after a year of use?
@robshaw4965 Жыл бұрын
Still working great, just use normal soap and water to clean.
@guy-zw3sz3 жыл бұрын
I'm getting an sport XMR it is supposed to be here in June . would like to get these soft windows but still confused why the hell they cost so much ! problem is if I don't get them now I will not get the discount when I get the machine
@robshaw49653 жыл бұрын
Everything in this world is expensive. Off-roading is like boating, just more fun!!!
@guy-zw3sz3 жыл бұрын
Another question I had if you or anyone else knew if there was any difference between OEM Can-Am upper soft windows or Tusk version the Tusk windows are half the price. I usually get burnt with cheep. I would definitely pay for quality over price but if they are the same I would just buy the Tusk version
@robshaw49653 жыл бұрын
The Tusk ones were not an option when I bought these. I’ve seen the Tusks on the net and they look exactly the same. I would have gone that route to save a buck if they were available then
@guy-zw3sz3 жыл бұрын
@@robshaw4965 I appreciate the response I thought the same thing They look exactly the same except for the name on it I will probably buy these hoping the material is as good as the expensive ones or the same. Thought about buying both and sending one back that I don't like😉👍
@waynehussey63792 жыл бұрын
Do you know if the Can Am mirror's work with the uppers. If they do, is it hard to take the uppers off with the mirror's installed? thanks
@robshaw49652 жыл бұрын
I’m not sure with the CanAm mirrors. I have the EMP mirrors which work with the upper doors on.
@doodrew8003 жыл бұрын
How do you like the windshield and light bar brackets from EMP?
@robshaw49653 жыл бұрын
Windshield is great. I wish they made a power windshield wiper. The light bar mount is solid but I had to shave a little off the light bar to make it fit into the bracket.
@kylecasper60713 жыл бұрын
Are they easy to take on and off if you choose to put them on and take off?
@robshaw49653 жыл бұрын
After the original installment, they can be taken off and on in seconds. Only 4 pins per door hold them on.
@jtalonrider47693 жыл бұрын
Where you buy the bar light? With those mounts
@robshaw49653 жыл бұрын
Mounts or EMP, the light bar is a 42” EBay buy for $60
@arturosardinas35863 жыл бұрын
I ordered these soft doors but I only received the soft doors no brackets?
@robshaw49653 жыл бұрын
Contact the company you bought them from. The same thing happened to me. They shipped the brackets quickly.
@arturosardinas35863 жыл бұрын
@@robshaw4965 thanks fir the reply awesome machine! I got it from partzilla what they did was send me harware with some inserts and pins but no brackets now they sent me a shipping label and want everything back to reorder directly from can am but not sure what's coming in the new package
@robshaw49653 жыл бұрын
I’d just follow what they ask. I bought mine from Rocky Mountain ATV. They just pulled the brackets out of another box and shipped them to me. They said that CanAm was shipping to RM ATV, once they got them they’d just put them in the box they pulled them from. Sounds like CanAm needs to do better checking what’s in the boxes before shipping items out