Hope you went through with that purchase i bought one a few weeks back put 100 rounds through & I’m absolutely in love my friend has a mete & the standard tp9sf i find little to no difference between all 3 as far as accuracy great gun for concealment yet not too small to be a range gun

@@seanhanley2036 I am just waiting on a bonus check to come through. I had also waited until ammo prices had come down. I had tried to shop for some 6 months ago and couldn't even find any. Thank goodness that is over. thanks for the encouragement!

Know this. The aftermarket accessory mags shown in this video are never available and in stock by this garbage company Canik. Good luck.

Because they are not made by CANIK, you just said it, Aftermarket. They are made by TAYLOR FREELANCE and can be found at this link, taylorfreelancestore.com/canik/mag-extensions/

@@gunsrus777 Thats why i also said MAGS, because im talking about MAGS from Canik for Canik firearms. I dont give a shit about expensive overpriced Taylor Freelance whom charges as much as an entirely brand new Mag, just for a damn glorified floor plate, and they only allow unprotected credit card transactions, no paypal, like wtf? The canik rep will lie and say "couple wks and they should be back in stock", meanwhile i check back weekly for 9 mths and ziltch. Id sure like to know who you sucked off to get those. Shitty company..

I was looking at those at OpticPlanet.com at a great price. I like the look but some were leaving a bad review. Im looking to swap mine with a Holosun 407k green dot 6 MOA, I have the same one mounted in my CZ P10F, great optic. Thanks for watching, please subscribe.

I guess mine is stubborn I gave in and took it to my local gunsmith if he's going to fix it for me. Definitely looking for it again thank you for responding keep up the videos my brother

I wanted all black but thats all they have at the gun store. Enjoyed good pistol.

You know of any holsters for the SC with lights

I have received this one last week it till a month to ship out, but is really nice you can other customized in colors and with the option of the Olight Valkyrie mini or the Baldr mini. www.ebay.com/itm/Canik-TP9-Elite-SC-IWB-Holster-Dual-Layer-Build-Your-Own-/164398381815?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0

Likewise. Canik Elite SC with the HS 407k 6 moa. Solid.

I have an sfx, and a standard elite. The regular elite has been a challenge to conceal. I want the elite sc.

SFX are great, great guns. But yes is a big one to conceal unless wintertime with a jacket. The SC is a great choice and you have that great trigger still, lots of aftermarket and if you go for the red dot get the Holosun micro, not saying the sig dot is bad just the Holosun is better.

Lock the slide to the rear without magazine when you storage it. That will loose the spring tension a lil.

@GUNS R US thanks just got mine will do

I have the Tacstyle IWB and love it!!

​​@Willie Powell too bad they don't sell them on etsy anymore. Sucks because I need a holster like that

TaylorFreelance.com is a +9 extension for the 12rd that comes with the gun. Thanks for watching!

Nice! HB have the internal springs to reduce trigger pull weight and it’s easy to install they also have a video, how to install.

Once you remove the screws with the slide off introduce a drive pin punch in the holes from under the slide a tap slightly, will come off.

I had to whollop on mine several times, just have to be careful but confident

No, the 12rd otherwise will be a gap between the grip and the extension, with the 12rd there’s no gap. I did that and order another 12rd.

Legacy holsters

www.ebay.com/itm/BloodyWheels-Sleeve-for-Canik-TP9-Elite-SC-9mm-READ-ITEM-DESCRIPTION-/154471357119?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0

Awesome gun for sure. Be aware it is BIG for a subcompact! Way bigger than the shield, p365, gx4, and hellcat. But it is an awesome gun no doubt about it. Best trigger in its class

@@sliderkitz that's actually some of my appeal to it. I don't care for really small handguns. same reason I'd prefer the Hellcat Pro over the standard hellcat & this Canik is the best new gun bang for the buck I can find to date

@@1Bonehed with that reasoning, it makes it the perfect gun for you, glad to hear that!

He’s got the plate on there. If you’re getting one and planning to add an optic I’d advise using the plate because it has detents that will help keep the optics in position. Don’t worry too much about it being plastic. If you Mount it right it’ll be fine.

I do have the plate, I will removed and check because I have a question myself. I get it the plate have the detents, but some plates don’t have detents to the slide, so in other words the plate is useless if the plate is mounted to the slide and still move. Unless the slide is a perfect cut for the optic length. If you are using torx screws the optic wont move, the head of the screw is in a cone shape so wen you thigh the screw the cone shape makes pressure adjusting to the size of the optic hole, and thats why it wont move

Most of them but not sure if they will fit all. I believe the 10rds are limited, I think they have a piece to block the mag since is a mag restricted for those states that are restricted to 10rds only.

The plus +9 already comes with the spring from Taylorfreelance. Using the 12rd spring won’t cycle. Now, that spring that comes with the +9 is made for a 18rd mag so you will have to cut a couple of turns from the spring. I don’t remember how many turns I have cut on mine but I’ll start with two and try to fit 21rds but if is to tight I’ll cut one more and then try it again. Don’t go crazy cutting turns, be patience.

@@gunsrus777 thanks a bunch!

You don’t need to tap it but yes there is definitely lil more tension that the original mag and that is due to the spring tension inside the mag and the mount of rounds that gets push down when the mag is inserted in the pistol. Means there is more pressure when the round hits the ramp under the slide when inserted, that happen when that last round is thigh, if you remove that one last round for a total of 20 and not 21, the mag will not need to be forced at all. I have tested myself, hope that answer your question. That happen with most of the mag extensions they are rated 4-5 for example, and that fifth round fit but tight.

Yes you can

The light is a Olight Baldr mini www.olightstore.com/baldr-mini.html Blackstrap taylorfreelancestore.com/canik-sc-sub-compact-backstrap-aluminum-red/

Not that I know, but I’ll check and let you know.

www.ebay.com/itm/Canik-TP9-Elite-SC-IWB-Holster-Dual-Layer-Build-Your-Own-/164398381815?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0

Muddy River Tactile website will have it.

SAR 9, great handgun. look at my SAR 9 videos for upgrades.

@@gunsrus777 thanks I will sir

Nothing wrong with Sar pistols. That company has been building guns longer than Canik. I want that Sar ST45. It is the same pistol as the Sar 9 but in .45 acp. Can't find one anywhere 😕. That Sar 9 is a good pistol !!!

Love my SAR9, and they have a great line of firearms. And the price is just right.

Nice🦾

If you’re using an extension the last thing you want to do is clip the spring. You’re adding more room so you should be ADDING spring.

So, this +9 is made for the 18rd magazine. In this case I have tested and fit perfect to the 12rd, same concept but in a shorter mag. And thats why you have to cut your spring, not the one that comes with the 12rd mag off course. You will cut the spring that comes with the kit, the +9 extension. I have 14 coils on mine, don’t remember how many I had cut. But that will work for you.

Once you assemble the mad, if you don’t get 21rd, cut 1 more coil. Some springs are thicker than others.

Confirmed, best to use the plate on this one

In the 12 rd

Is for the 18rd and I initially ordered for my SFX but try it to see if work and it works perfect. But in the 12 round in addition to that you will have to cut couple of coils in the spring that come with the taylor extension, because remember that spring is for longer mag, please dont go to crazy cutting coils, I would cut 2 and put it tougher, if doesn’t fit 21 take it off and cut an additional coil. Please let me know how many coils you end up cutting, becuae I dont remember and to put it out for the next person asking, thanks in advance.

I cant find the company that made mine. But you can check on ebay. I have learned how to do them, so now the sky is the limit.

@@gunsrus777 can u make one for me if u can

Added, thanks for watching, and please subscribe.

Here we go bro, www.ebay.com/itm/Canik-TP9-Elite-SC-IWB-Holster-Dual-Layer-Build-Your-Own-/164398381815?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0

@@gunsrus777 appreciate it man!

Muddy River Tactile

Yes you can, but you will have a gap between the grip and the magazine floor/extension, but you can add a spacer from here, bloodywheelsusa.com/store/ols/products/canik-tp9-elite-sc-9mm-magazine-sleeves/v/CNK-TP9-ELT-SC-MCG-TP9-BLC

It is for the 18rd mag. I have a Canik TP9SFX, I have ordered for the 18rd mag. But before I had tried in the 12rd and it worked perfect. Only mod you have to do is cut a couple of coils from the spring because is made for the 18rd. I dont remember how many I have cut, but you can start from the bottom with two, put it together and add the ammo if fits 27 you good. Make sure there is space for 28 very tight, meaning hard to put the 28rd and then removed so you have 27 left. The reason is to have some space to compress when you insert the magazine.

@@gunsrus777 Awesome, thanks for the reply and info!

I got this one from eBay but will take a month, really nice and well build. www.ebay.com/itm/Canik-TP9-Elite-SC-IWB-Holster-Dual-Layer-Build-Your-Own-/164398381815?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0

The hard part isn't finding a holster that is light compatible. The hard part is finding a holster that is optic compatible, and even harder if you're a lefty like me.

Yes

taylorfreelancestore.com/canik/mag-extensions/

Legacy Firearms Co makes a holster for it.

Just a punch out the pin on the original backstrap and install the TF strap the same way

It is, no i haven’t got the recoil spring yet. Remove the magazine and lock the slide to the rear when not in use. That will reduce the tension in the spring.

It will break in over time do not put a lighter spring

taylorfreelancestore.com/canik/mag-extensions/

If you goto century arms website and email their cs, they will send you 1 for free. Tell them you heard there was a lighter recoil spring and they will email you back and ask for the serial number and your shipping address. A guy on the canik nation group on fb told me about it the other day

@@johnkerr1435 thanks for the info. I didn't know there was a fb group. About to join that now?

Taylorfreelance.com

This one, taylorfreelancestore.com/canik/

SIG SAUER VCROWN HOLLOW 115 grain. For target practice anything available

The extended +9 and the backstrap from taylorfreelance.com

@@gunsrus777 heck yea man u got any social media like insta or Twitter so I can tag u for my build?

I don’t have social media. Sorry

taylorfreelancestore.com/canik-plus-9-170mm-basepad-tungsten/

I dont use it that much, but not often.

Yes it is, Taylor Freelance are top notch.

@@gunsrus777 thank you I just ordered one. I will subscribe for great video and comment response

The model is, SIG Romeo Zero red dot. I bough it from OPTICPLANET.COM

Sometimes pay lil more goes long way. Buy it from a reliable source. Just saying. Optic planet is a very reliable source, being purchasing from them for years.

I have tested this extension at the range today and works flawless. I don’t recommend it for concealment but for spare mag or in the pistol while traveling on the road. I used today my most hated Olight Baldr mini laser and this thing was nailing dead center, very impressive. Not gonna lie, better that my P320 x carry.

@@gunsrus777 that makes sense. I like Olight tactical lights, I have several, but I highly recommend also to own battery operated lights, like the Streamlight, Inforce, and Crimson Trace, for the field. You cannot rely only on electricity to charge up your light. Hence, I have those 3 brands. What other Canik models do you have?

Agreed 100%

As right now this one an the SFX, just two for now.

@@gunsrus777I highly recommend you the METE SFT or SFX. The METE models have the best trigger pulls for striker-fired handguns. It improves your accuracy noticeably.