Canned Air Duster VS 60,000 PSI Waterjet - Random Machine Shop Tests

No video

Canned Air Duster VS 60,000 PSI Waterjet - Random Machine Shop Tests

Рет қаралды 1,058,835

5 жыл бұрын

Freeze and Break a Lock With Compressed Air? Challenge accepted. See what we did with 8 cans of Canned Duster.
**************** WAYS TO HELP US *************
1. Subscribe AND Turn on Notifications ► bit.ly/Waterjet...
2. LIKE this video (It tells KZfaq you want to see more stuff like this!)
3. Leave a Comment - It puts hair on your chest
4. Share this video - It turns horses into unicorns
5. Watch our other videos. bit.ly/WJvideos
****************** ABOUT THE VIDEO **********************
We got 8 cans of canned duster and decided to have some fun. We knew we wanted to cut one can, so we also tried to break a lock, freeze hair, freeze a soda, and freeze a banana. Most of the tests were fails, but the waterjet test was amazing.
***************** OTHER LINKS AND STUFFS *******************
What should we do next? Let us know in the comments. But check here first to see if we’ve done it … bit.ly/WJvideos
We do more than just cut stuff with water! We build stuff and do crazy stunts. Most of what our waterjet does is create useful things out of metal and plastic.
bit.ly/WJcreate
Follow Waterjet Channel for updates, live streams and fascinating video sneak peeks! We don't post much here, but we appreciate the love. What else should we post here?
/ waterjetchannel
/ waterjetchannel
/ waterjet
Leave a comment with what you think we should cut in half next and subscribe already! Go here to see all our videos. bit.ly/WJvideos
Music: David Cutter Music - www.davidcutter...
Waterjet For Science --- We love fun experiments and trying new things.
bit.ly/WJscience
COMPILATION OF Satisfying Videos - Dangerous Waterjet Cuts - Some of our more dangerous ideas/stunts/videos, the haircut was intense.
bit.ly/WJdanger
Interesting Slow Motion Cutting - My favorite slow motion video was making an insane air cannon and launching 7 knives.
bit.ly/WJslowmo
What's Inside Nature? We think Nature is awesome, but even cooler cut in half
bit.ly/WJnature
Links might be affiliate links, and if you buy stuff from them we might make money. And that might cause us to experience happiness and to make more videos.
We work mediocre hard to make these videos for you, so please don’t steal them, if you’d like to use our video for something please contact us via email. We're usually pretty cool about things like that.

Пікірлер: 841

@pkonneker 5 жыл бұрын

Lewis is too good for this world.

@sylvanusthayer2198 5 жыл бұрын

We definitely need more Lewis

@reggiep75 5 жыл бұрын

'Yeah.. A 100%!!'

@ednac1626 5 жыл бұрын

Yes more Lewis!😍

@jacobbateson8215 5 жыл бұрын

That's why we need a clone army of Lewis to colonize mars.

@Foscko 4 жыл бұрын

He seems like an annoying kid that no-one likes but always just shows up.

@jimphubar 5 жыл бұрын

I think Lewis needs new friends..

@jcezer9603 5 жыл бұрын

It's so strong it won't cut

@jimphubar 5 жыл бұрын

@Nc Anonymous Will you be my friend?

@huerta25264 5 жыл бұрын

yeah some friends that can break his hair

@ExperimentalFun 5 жыл бұрын

Yes, you should get a steel pipe the size of the can, seal off one end and then slide the can in and shoot it with the water jet. Aim the pipe at stuff and see what happens :)

@jahvonabrigo7157 5 жыл бұрын

Add a ramp that leads into the steal pipe and put the cans on it for rapid fire

@RetroOkamii 5 жыл бұрын

Brinks and Masterlocks are jokes, they take

@MarkATrombley 5 жыл бұрын

ABUS is much better but more expensive.

@ob9444 5 жыл бұрын

@@WaterjetChannel ABUS is the way

@dtroystopper2 5 жыл бұрын

Kind of funny that he is a lock expert until you ask him his preference on brand.

@whoofianbrony8804 5 жыл бұрын

Depends on what you're trying to protect. Mr.Locksmith has a few good recommendations, if you can get past him trying to sell stuff

@RetroOkamii 5 жыл бұрын

Abloys are pretty good, ABUS is good, there's a lot of good brands that make bad products though as well, some have some design oversights and exploits. Some really awesome "lock review" channels I recommend are LockPickingLawer and BosnianBill, they make videos of picking various kinds of locks and check for/abuse exploits in various models. The main reason those two brands are most of what you see at stores is because they just run the main commercial market, probably partnership with Wal-Mart, Ace, various other hardware stores, they all have the same cheap 4-pin core inside of them even the big hunky "premium" $60 products.

@cirquedumushroom 5 жыл бұрын

Someone call the lock picking lawyer

@TheDopedealer718 5 жыл бұрын

River Doherty 😂

@QuantumPlayz 5 жыл бұрын

TheDopedealer718 it’s a YT channel

@TheDopedealer718 5 жыл бұрын

QuantumPlayz yea... hence why I found it funny

@jamesbizs 5 жыл бұрын

He’d open it even faster. I’m sure he knows all the exploits

@goldenfox334 5 жыл бұрын

@@jamesbizs he uses a nail gun

@froginthemachine 3 жыл бұрын

Lewis is the kind of guy who would still pick you up from the airport after you froze and broke off a piece of his hair with air duster

@bikerdave1274 5 жыл бұрын

When was your Lewis last calibrated? 🤔 Has your Lewis ever been calibrated? 🤔 We cannot verify the lick/taste test authenticity on this one until we know that the Lewis has passed all criteria in the UL test scenarios. I mean c'mon, what were you thinking? Trying to fob us off with a discount lick tester, tut tut

@johnrambo5010 5 жыл бұрын

Biker Dave was going to like the comment but then realized it’s at 69 likes so I left it but you got my like in a comment

@The4MusketeersYT 3 жыл бұрын

@@johnrambo5010 I know it’s a year later, but it’s 94 now so you can like.

@ohlivingtacos8469 5 жыл бұрын

I just water jetted this boat in half!

@TCGProductions03 5 жыл бұрын

*_THATS A LOTTA DAMAGE_*

@iphone202020220 5 жыл бұрын

I bet Tape could fix that.

@mralabbad7 5 жыл бұрын

@@iphone202020220 what kind?!

@mikecorleone6797 5 жыл бұрын

Flex tape will fix it

@klinkclang 5 жыл бұрын

We need a Waterjet x Slowmo Guys collab!

@electronicsNmore 5 жыл бұрын

People on YT have a strong love for padlocks. LOL This video should do well. Next time take a thermos to a welding supply store near you and get some liquid nitrogen to lower the padlock into.

@Retrenorium 3 жыл бұрын

More like robbing..

@justinazure7603 2 жыл бұрын

It's all the tweekers. Locks and flashlights is like gold to them.

@NVUSAttitude 5 жыл бұрын

I love these guys, always have, never clickbait, they say what theyre gonna do, and 2 seconds in, *they’re beating the absolute snot out of a lock that got excessive amounts of air duster*

@Johnadude3 3 жыл бұрын

The can launch is absolutely amazing. From what it looks like the ultra high pressure of the water jet got into the can through the hole it made. My initial thought was that the duster would get out but those cans are nowhere near 60k psi so the hole bade by the cutter only took in water pressure. The top of the can turned into a ticking time bomb. As soon as the pressure inside the can was greater than the strength of the seal between the top of the can and the can itself, it flew off. This in turn created an equal and opposite reaction on the bottom of the can. The force pushing on the bottom of the can, guided by the ply wood and pipe strap, sent it flying so fast it crushed itself on impact. Assuming that there was roughly 60k psi applied to the bottom of the can, with the area of a standard 3 inch diameter can being around 7 square inches, you can estimate about 420 THOUSAND POUNDS of force propelling that can. **That is a maximum figure, as the real number lies at whatever pressure the top of the can failed**

@youniversaldiscovery6339 5 жыл бұрын

You guys really need a Mythbusters type blast shield.

@UnitSe7en 5 жыл бұрын

But with the blast shield down they can't see anything. How are they supposed to fight?

@realsheasmith 5 жыл бұрын

I LOVE LAME STUFF more please. These videos are all great. I love the non water jet things too!

@joof2346 5 жыл бұрын

You should do water jet vs flex tape

@mikefisher123 5 жыл бұрын

Waterjet Channel aw man still no reply to mine lol

@user-dn5if5lt2h 5 жыл бұрын

Thats alot of damage

@itiswhatitis4965 5 жыл бұрын

There’s no point, the tape is too strong

@graywolf7648 5 жыл бұрын

Flex tape 1 water jet 0

@captainjack9341 5 жыл бұрын

Flex tape no contest

@mako4vr 5 жыл бұрын

thanks for the information on the locks. time to go get a new bike!!

@sean..L 5 жыл бұрын

You should have called Codys’lab for some more scientific/ creative things to freeze.

@aliciakiedrowski8234 5 жыл бұрын

I love that old man 😭 “it is delicious”

@themrarcijs 5 жыл бұрын

Make a controlled air duster launcher out of some PVC pipe with some end cap put it in strap it down to the water jet shot trough the pvc pipe in to the air duster to shoot at some stuff and measure the speed and strength of it ;)

@colyngautreaux1078 5 жыл бұрын

And a ZGB ivan head as a target

@DKTAz00 5 жыл бұрын

Damn I'm glad I held in, the ending is just crazy :D 'LETHALITY!'

@JohnSmith-ng2ek 5 жыл бұрын

I thought I was watching lock picking lawyer for a sec

@dazley8021 4 жыл бұрын

The moment they put the can on the waterjet I was like "Well that's going to leave an imprint" and lo and behold, they didn't disappoint.

@TheFritzy1234 5 жыл бұрын

That canned air stuff is explosive when in liquid form and combined with water which may contribute to the explosion. You can find videos of it.

@Aptenodytes 5 жыл бұрын

Yeah. Hfc-152a or r152a can be used in small appliances and cars as a refrigerant as well.

@SilvaDreams 5 жыл бұрын

It's not explosive because it is CO2, maybe the REALLY old stuff was because they would use Nitrous oxide but those were taken off the market like 20 years ago (Mostly because kids were using it to get high since it is laughing gas)

@Aptenodytes 5 жыл бұрын

@@SilvaDreams uh no it's not co2. Co2 is 1000 psi at 70 degrees Fahrenheit and would not be safe. Its difluroethane or r152a a refrigerant

@Aptenodytes 5 жыл бұрын

@@SilvaDreams also n2o has a lower pressure than co2 so co2 would be more explosive than n2o. The old stuff was r12 or Diclorodifluromethane

@macauley4466 5 жыл бұрын

@@Aptenodytes this man knows stuff

@jeffcutlipjr4588 5 жыл бұрын

I swear. I love y'alls videos. They crack me up. And they are slightly informative

@NVUSAttitude 5 жыл бұрын

Breaking a lock, like in the thumbnail, they got bored, so they got a can of soda, now they’re *freezing someones hair and theyre going to break it off* this is the pacing of content i came to see, nothing scripted, everythings improv and amazing

@magnificentbastard1894 5 жыл бұрын

The liquid inside of the duster cans reacts with water in a violent way (like you saw). The backyard scientist did a video demonstrating that. Either way, that was awesome!

@Jacob.908 5 жыл бұрын

i swear to god lewis is just a cartoon character who cheerfully goes along with everything and it's terrifying

@rharoundworldcp 5 жыл бұрын

Water jet: Most secure lock we found Lock Picking Lawyer: So it only took 2 seconds to open.

@lefmankan 5 жыл бұрын

I like Lewis

@bas17h4 5 жыл бұрын

I like Lewis

@CrckKllz68 5 жыл бұрын

I like Lewis

@mannyismood8187 5 жыл бұрын

I like Lewis

@blazzing4321 4 жыл бұрын

I like Lewis

@andrewjb05051998 4 жыл бұрын

I like Lewis

@MrPendell 3 жыл бұрын

Saskatchewan guy weighing in here- no canned air required up here for experiments with freezing things. I’ve walked outside in January shortly after a shower, and had my hair freeze into a solid helmet within about 60 seconds. Do that a few times and you’ve got a pretty good case of split ends, but I don’t think you could actually get the hair down to a temp where you could break it off while the scalp was still at a temperature consistent with being part of a live human. Steel, though does get brittle and break when it’s cold- just ask anyone who works on heavy equipment up here- failures of hydraulic cylinders and lines (both solid steel lines and steel braid hoses) go up a whole lot in the winter, along with steel cables, and things you can sometimes get away with doing with a chain in the summer, you’d better not dream of doing in the winter up here.

@beepboop5684 5 жыл бұрын

But the real question is *CAN YOU CAST OBSIDIAN*

@coin9818 5 жыл бұрын

No you can not. I saw another KZfaqr, I think How To Make Everything tried and he failed even by usin a industrial kiln

@gyula6516 5 жыл бұрын

Coin981 nah it worked but I don't know if you can really cal it obsidian after all the aditives he used

@gregoryderpwrld111 5 жыл бұрын

Coin981 r/wooooosh???

@tobiasusploegusius9361 5 жыл бұрын

@@gyula6516 r/Wooooosh

@coin9818 5 жыл бұрын

@@gyula6516 I wouldn't consider it to still be though

@c4pt1n54no 5 жыл бұрын

Walmart is the right place to go for r152a duster, but not for locks. Those things are trash

@Scribnastyman 5 жыл бұрын

Captain insano shows no moicy.

@mystical6248 4 жыл бұрын

@@Scribnastyman I have so many questions

@chadoftoons 5 жыл бұрын

There are tons of locks with the locking spring problem where you can force them open rather easily if you try Even are some clips that you can just rotate into the spring and you can just open them. padlocks of that size just need to hold the thing on both sides

@devin9124 5 жыл бұрын

Cheapest rockets ever.. if I could only get my hands on a waterjet.. 🤔🤔🤔

@JackboMack 5 жыл бұрын

New series idea. “Launching an air duster can into ________.” You can start with a cinderblock! :D

@TheyCallMeKent 5 жыл бұрын

Lewis is a hero and deserves a really tasty cookie

@keepironman14 5 жыл бұрын

The people at the store probably thought whoever made the trip was a duster-huffer (I used to work retail and we had at least 3 different people come in to buy them to huff.

@blaineelliott8558 5 жыл бұрын

It does that cause the metal gets so cold it shrinks the metal and it slips out

@Wickedreptiles 5 жыл бұрын

Lol I think you just showed a bunch of people how to break locks.. Lewis deserves a raise!

@jayssworld7873 5 жыл бұрын

Literally laughed when he was all for it to the very end. And best part was no sponsor which gave all the time to you guys 😁

@ytrewq6789 5 жыл бұрын

The gas in those air duster cans is 1,1-Difluoroethane it is also known as R 152a refrigerant and it also explodes on contact with water when it is still in it's liquid form.

@ashtonwimmer5564 5 жыл бұрын

You can get high off it

@ytrewq6789 5 жыл бұрын

@@ashtonwimmer5564I believe I left that out for a reason.

@AndreS_-df2nw 5 жыл бұрын

Some home mechanics have used it for refrigerant in a/c systems successfully.

@ytrewq6789 5 жыл бұрын

@@AndreS_-df2nw Interesting!... I did not know that, Smarter everyday!.

@NVUSAttitude 5 жыл бұрын

In the title, there was no mention of an explosion, there was 0% clickbait, it happened and I think this is the first time on youtube, that someone has actually surprised me

@peteragurkis3590 3 жыл бұрын

Lewis is a real good sport. Willing to but himself on the line for science. Good man.

@madladdan 5 жыл бұрын

You oaks are just that small channel thats slowly growing which will never bore you.

@greenwicx 5 жыл бұрын

You should cut water with water

@myfatassdick 5 жыл бұрын

7:08 done

@juliusceasar9769 5 жыл бұрын

So cutting ice?

@kylekenney1907 5 жыл бұрын

I would LOVE to see what happens if you pierce one of these underwater! I think it would cause an explosion. In fact, I think the reason it shot off is because the water from the jet got inside and could not escape, and the point of least resistance was the top of it. When you mix water with something that cold and contain it, it'll blow up. Be safe if you do anything else with them!

@karleopard 5 жыл бұрын

They sell freeze spray for circuit boards that get far colder.

@emilyheldt5364 5 жыл бұрын

I look forward to your guy's videos each week!

@LuniedaBafoonie 5 жыл бұрын

You gotta love Lewis it’s legit impossible not to

@Lexuman 5 жыл бұрын

This entire footage was deceptive trickery!

@j1bus_pointofview828 5 жыл бұрын

The perfect lock for a carpenter. "Forgot your key? Use your hammer!"

@therealdestructicus 5 жыл бұрын

I've used iso butane(very flamable) in a lock cylinder (brass) and hammered a screw driver into the key hole, shattering the cylinder. After that pulling the piece out with pliers released the mechanism.

@johnfreeman2956 4 жыл бұрын

@2:21 "double barreled freeze ray" 😂

@danklyf4202 5 жыл бұрын

🙊 oh fuhk, they just put Brinks on blast! 😂😂😂😂😂 dead af right now.

@natethegreat3194 3 жыл бұрын

Haven’t watched this channel in like a week, forgot how entertaining you guys are

@Aderon 5 жыл бұрын

Amusing. WHen the can was first pierced, the regular gas that's used for dusting prevented the water from reaching the propellant. The moment the pressure dropped below the pressure of the water jet, the water and propellant mixed instantly, causing the pressure spike as the propellant boils rapidly.

@MSJaeNonn 5 жыл бұрын

lewis is a good kid. we need more lewis

@mrslinkydragon9910 5 жыл бұрын

Should of teamed up with the lock picking lawyer! He has some beefy locks!

@mikefisher123 5 жыл бұрын

You guys are friggen awesome! Love your videos

@sinilania 5 жыл бұрын

This is the Lockpicking Lawyer and today i'll show you 2 guys with no lockpicking expirience freeze and hammer this lock.

@Keirathi 5 жыл бұрын

You might want to look at some videos where people freeze stuff in liquid nitrogen and then smash it. It takes a few minutes of sitting in it to freeze solid enough to smash. You would probably need like 10 cans of air duster to freeze anything all the way through. Also, just go buy some liquid nitrogen! It's probably cheaper by volume than air duster anyway lol.

@MrScottyRocket 5 жыл бұрын

Props to Lewis for being game af.

@GuyNamedSean 5 жыл бұрын

Mane and Tail? Good boy, Lewis.

@alexanderivory-brown118 5 жыл бұрын

*In my best Patrick Star voice* Pinkies up Mitchell, pinkies up!!!

@Suirano 5 жыл бұрын

I love how this channel is full of random dumb ideas. It is some of the best stuff I have watched.

@Badgermatt-nc5nr 5 жыл бұрын

You guys have some of the coolest unexpected outcomes!!!

@iliagofman 5 жыл бұрын

wow so much energy in an air duster, oh never mind it's from the waterjet lol

@callumimeson7370 5 жыл бұрын

Bet they were all high off the duster fumes after this😂

@v3nomstone54 5 жыл бұрын

That bottle disappeared like one of Houdini’s magic tricks

@eduardbotin2278 5 жыл бұрын

“Eazy way” he is nearly dying smashing that lock

@michaelwoods7770 5 жыл бұрын

wow that is dangerous. that thing got some speed.

@princetonmason3345 5 жыл бұрын

Thanks for the advice can't wait to try it

@Rusty.1776 3 жыл бұрын

That was freaking awesome! do it again! do it again!! do it again!!!😄

@chrisstone5471 5 жыл бұрын

8:41 back to the future 😂

@ethantyler1-isabitch75 5 жыл бұрын

The air duster reminded me of the thing at the dentist that cleans your mouth, and it made my mouth feel weird watching them freeze it lol

@motlow1465 5 жыл бұрын

How did that mixing tube not break!

@ryelor123 5 жыл бұрын

The world would be a miserable place without this channel. Oh, and the pressure jet's water heated the stuff inside while not allowing it to escape. Kind of like what happens when you put an aerosol can on the fire.

@statictoilet1228 3 жыл бұрын

I’m sitting on a toilet rn and my intestines are exploding as I’m watching this video. Good times man good times.

@CollyFlower192 5 жыл бұрын

You guys are honestly good lads, id have a drink with ya

@dandfgarage986 4 жыл бұрын

Lewis is actually so funny. “ can we freez your hair” 🤣🤣🤣🤣😭🤣🤣🤣😭😭😭😭🤣🤣🤣🤣🤣🤣🤣

@gullreefclub 5 жыл бұрын

Lewis is not the sharpest tool in the draw, God bless him because he is going to need it with friends and coworkers like his

@hughaskew6550 5 жыл бұрын

You can open quite a few locks with the hammer method, no freezing required.

@Prosoundrepair 5 жыл бұрын

I use freeze pray all the time....well I used to. TO cool a "soda" to a good drinking temp from room temp spray the can "bottle" while moving it in a circular motion. You can make a hot or warm "soda" into a nice cold beverage in less than a minute.

@lachyness 3 жыл бұрын

0:40 well now I know where half life got the sound from

@matthewbergeron3641 8 ай бұрын

Decent padlocks aren't sold in big retail stores. Just look up a local locksmith and they usually have some good stuff

@NVUSAttitude 5 жыл бұрын

4:36 I never knew louis (however you spell it) existed until now, and i can’t wonder any more, *why havent I seen this beautiful test gerbil before*

@Scribnastyman 5 жыл бұрын

Lmao. Yet another way to break into a Masterlock. My favorite way is the catfood can.

@StupidRobotFightingLeague 5 жыл бұрын

Best advertising company ever.

@MIgunnut 3 жыл бұрын

What you have is liquid propane at -44°f it just doesn't have ethalmercaptan to make it stink -44 does make steal brittle but you have to let it soak for extended time liquid nitrogen works much faster

@rickthe3rd402 5 жыл бұрын

Make an air duster rocket and shoot it at a rack of ribs.. then eat it lol

@amtrak713productions8 5 жыл бұрын

Now that last part was awesome

@BOTDan 3 жыл бұрын

3:50 that old man ❤

@DJAsHeRMusic 5 жыл бұрын

Lewis is da man need more of him in videos

@ThatGuyEvan. 5 жыл бұрын

Thanks now I can get into my neighbors safe!

@michaelcooler9649 4 жыл бұрын

6:10 Haha "WHERE'S THE STRAP?" someone is in danger

@mikeries8549 5 жыл бұрын

Wait. To "Pop" a master lock you need channel locks and a hammer. Pound the lock on the side as you pull on it with the plyers and it'll open and it's still lockable. Not broken. Neat little trick to know for when you've lost the key.