Timestamps Parts overview: 1:18 Chassis assembly: 6:59 Axle assembly: 10:40 Rolling chassis overview and body fitment: 14:25 Wrap up and next steps: 19:36

You got me all stoked now, I got that new van RC rock van, orange and gray can’t wait, It is on its way come on mailman 😁👍

Yeah I love mofo RC he has awesome products for sure. I have a few things from him, but this frame I ain’t got. This is going to be a awesome build appreciate you sharing, Yep we’re watching

Very exciting.

Okay you convinced me. My Gladiator needs Super 8s. :) Thank you!

Yeah look how beautiful those axle housing look under there yeah that’s what I’m talking about catch on the next one

Turn the skid plate around and that will make the motor face the rear. Don’t go brushless and ruin that build 😂 looks great 👍🏼

Heck yes they are, beautiful housings, yeah I’m going to have to scope A set of those

Now that’s what I’m talking about 👍👍😎 yeah that’s beautiful dude haven’t really built a comp rig’s. That’s just sweet dude

You are spoiling us with all these uploads!

Adam!!! Those LGRP axles look like Jewelry! I like how they built that rear axle with the brass cover in front like a removable chunk. Love it. Again, beautiful build. I'm building an Ugly Chassis build as well. Now I'm thinking I should've looked into Little Guy axles.. Meh, it's never too late....😁

Yeah I know what you mean all those little screws your fingertips Yep I love those axle housing Well appreciate you sharing catch on the next one

Heck yeah I’m waiting on my 55 pin tires, That just looks sweet the way it is I would drive it with those then the bigger ones they’re exactly the same tire just taller than the other that will give you your answer. My vote is on the 55s for the win yeah well sounds good to me 😁👍👍😎

Yeah love my four corner scale, they are great to have my friend Jim Wolf has the Bluetooth one they came out with that one two weeks after I already brought the wired up one but hey it works great I love it

The Scx24 of Theseus

You Nailed it ! 👏

that little nugget is ready to tackle anything! great build

This is the nicest scx24 build I've seen yet. That's sick. I mite have to do this to one of my 4 deadbolts I have for the family.

Heck yeah There’s nothing wrong with brush motors specially some of the mofo RC motors gosh it looks beautiful dude outstanding job on this build, appreciate sharing with us love it

i cant wait to see this new build in action look sick so far

Awesome build brother 👍, do it right the first time. Love those rears. Mofo parts are great, I'm also about ready for a ground up build, researching all the parts as we speak. Another great video Adam. Peace ✌️ bro

Looks great man.

Awesome video can't wait to see it run

Looks sweet 👍

Such a wicked build!. I'm just waiting in the mail man now. Ordered same links n chassis, But went with Meus racing axles. 🏁 your build looks amazing

Andrew is a little excited

It looks really good, i am new to the scx24 and i am getting a lot of great info from you. I enjoy looking at all the parts from the different companies you use. I have 3 orders in at injora currently. lol

I hope wherever see this that they read it because so far shift RC servo mofo Servo beasts are the two best that I have tried and they are amazing super fast super strong even on 6.5

Awesome build dude!

So rad! Love it man! I think with some bigger tires and a hair shorter front links would make a huge difference in looks and performance! 🤘

Sweet my man 😋

Look at the OGRC mini servo, you can find them on Amazon.

Love your brain work thanks for your videos

I'd be interested in some build comparisons of your fleet. Not sure if you watch exocaged but he did that recently and it was fun to watch. Would be cool with smaller stuff.

That's the only part I got from MOFORC on my Gladiator, is the steering servo mount. Works pretty well, for me!

I really like your Build, looks awesome! Looking forward gor the next Video on this 😁

I'm waiting on a few final parts and have a similar build planned but with the mazz cheat code chassis, LGRP S8 billets, LGRP billet trans, power hobby 58mm with the top from the 54mm (no fake reservoir), LGRP trail kings, Tegu24 Pro and Mofo SMP and a proline cliffhanger

I am working on pretty much the same build. I was wondering was rear bumper hinged body mount you are using? Cheers! Love your build videos, keep up the great work!

Will you show me how you turn your rims around like that please

i saw the shorts the super 8 axles

those super 8s are my favorite axle housings i think when my channel gets bigger I'll get some, but there a little too pricy for me right now.

Drool 🤤 ❤

Great video. Could you please tell me how you are mounting the body? I have the same body and can't decide the best way

Do u think u can make a video on the ogrc flat skid? I have not found a video on that skid

You do need a scale for corner balancing. So far our trucks are very similar. 👍

When you compare snaggletooth to the comp build, which wheel base do you feel works better? Have yiu found the perfect shock length?

Thanks for sharing 👍✅🇲🇾🇲🇾🇲🇾

Another great vid , awesome build Adam, don't know if you know,treal has extended links in various colors for the fcx24. Just got a set in blue, very nice, comes with driveshaft also.

How did front body posts mount before you swapped to magnets? I'd rather run body posts for mine but none of these aftermarket frames showcase the body mounting process.

Awesome build! Running the links with only one O ring is great for flex, but on my rig, it gives the axle tons of side to side movement. Does that happen on your rig? And for the tires, you should definitely go taller! And finally, with the wheels, I think some Injora Negative Offset Stamped Steel 1.0s would be perfect. The width is between deep dished and normal with the regular SS1.0s. I think it would be perfect on this rig.

Great video! I'm starting a acx24 class 2 build. Di you still love the mofo ugly af chassis? Thanks and keep up the great content!

Can you build a 1/10 scale lcg?

I have built this exactly as you did with the chassis and axles. The front binds really bad because the axle is so wide compared to the frame. Any ideas as to why please.

Why did you decide not to put rear wheel steering on this one?

I heard the super 8 axles have wider link and shock mounts, does it require custom links? Are your treal links in an extreme angle or would they work? Your shocks look like they are in a bind, Hardparkrc has shock spacers.

Can I get a complete parts list of this please?

Where did u get the rear body mount?

Hey Adam, I love this build so much I decided to do my own! Do you have any issues with the lower links binding on the skid plate with the wider link mounts of the super 8’s?

love the build, got my parts to start my own , qq , where did you get that back hinge part from so the body can open up like in bronco ......

Sorry if I missed it in the videos but which servo are you running on this build?

Fcx24 axles or the super 8 for an axle swap on scx24... Looking to get away from the stockers and gain significant turning radius.... Any suggestions cape? Thanks in advance...

What is the hinging body mount that you used for this?

Does the super 8 axles use their own axles shafts or can stock axle shafts work? I was interested in their products but it seems like they are all specific and proprietary parts. I bought their "4 link emax" servo tray and turns out it doesn't work with stock axle and links, only works with their chassis kits, and links. They are not clear about what part works with what. Their billet axles doesn't come with diff cover but the brass diff covers are sold out. Ripper chassis kits have specific links, but the links are sold out. There is super 8 steering links, i assume you can only use those steering links with their axles and not other aftermarket. You cant get one thing without the other. Their website is a mess.

I’m digging it! Do you feel the weight would be more of an advantage in competition than adding rear steer and dig features that would add a significant amount of weight ?

what is your shock setup? just oil no springs?

In your opinion what model scx24 is the best model for someone new to the crawlers

Are those axles wider than standard scx24 axles?

wonder if the body would work on a AX24

whatd you use to mount the body in the rear?

Man your videos are so high Def and bright it's awesome. And I love builds so this is great. And you have Inspired me to try and work out so I'm not the beer gut dude with an rc out in a field lol. You just set the bar for all us rc guys hahahaha make us all look like dorito munching mt dew drinking KFC eating tubbies hahahaha. All joking aside sick channel man.

Where did you get the body from

Awesome lookin rig man 🤙 I think the only thing that keeps me from building one of these is the loss of “scale” appearance. Personally I prefer the cage style (Capra-ish lol) body. Does anyone make that style of body for the 1/24’s? That is why I’m leaning toward the UTB.

Have you checked out Akers Engineering?

So what was the point of stage 1 and 2? 1 part from the deadbolt. From economy to tosing the deadbolt and toss a ton of cash in a compleatly new car. I dont get it. This is the first negitave thing i can say about your chan other than your choice of your 1:1truck.

Go with NSDRC and you’ll never look back.

Is this a class two build?

Your wife must really really love you to let you fully commit your wallet and time to the hobby as well as this channel in order to pump out content like this

Try building a comp trx4 not trx4m

Those shocks are shit. And no springs? Really? They do nothing more than hold the axles from falling off the chassis. What's the point? Otherwise it's a very nice build.

🥰🤩💥💯👍💪👏👏👏

I got the 100th like 😎👌

Bro just flip the transmission plate so the motor goes toward the back. Ask furitek to send the new motor. Sweet Build🤌🏻🔥

Is it better to build a chassis than buy a rtr and where can u get a complete parts list to build