I need one

Thank you! Came here to find this

I have the sudden urge to buy one or two

Plastic welder pistol is the tool

Thank you

You never worked on cars. Your channel got zero content.

⁠​⁠@@OmegaRedFanyou dont have to post any content about your work u know.

​@@OmegaRedFanthis is so random

​@@OmegaRedFan Brainrot moment

@OmegaRedFan I assume you’re a zoomer. Before your time people didn’t need gratification for every little thing they did. Just because everything some one has ever claimed to do isn’t posted on their KZfaq channel doesn’t mean it didn’t happen lol.

walk around in any American city and youll be super surprised to find people wearing a RESPIRATOR while just walking down the street, in no need whatsoever to have one on.

​@@SeasideStrangler it's not just America. They wear it because polution.

But not safety glasses while angle grinding away at metal spikes

@@kylepastaor pulling the grinder towards himself 🤦🏻‍♂️

@Jack Torrance dont be salty, youre prolly one of those freaks walkin around with a diaper on thsir face XD

You weren’t taught this because you had a proper education. These cracks will run. This paint will chip. The man took an grinder to a car bumper bro. It’s floppy as fuck still.

Because it's a temporary bodge and ok for internal ABS parts, but when painted the clips will eventually crack the paint.

It's called PRT classes Plastic. Repair.Technichian and he butchered the job honestly he used 2 different types of plastic in class you supposed to use material or weld on plastic never scrap And patch parts together I'm taught to do life time rprs

​@@albertor.6635lol did you notice the spraying the fog light

Great art for 3rd world repairs. Not the way to professionally do that job. Replace front clip to make it last and look new. Retired 43yr auto tech.

Noted

I think this is just a quick repair on old cars before buying a new part or buying a new car.

It looks like they cut the part where he filled in the cracks. After welding those pins in, you can use a soldering iron and a cable tie to literally solder all the cracks together.

@@deathrodamus9608 that makes more sense

What about when he oversprayed onto the reflector 😂

A grand would actually be a deal.

​@Nadril21 nah I got a new bumper for $500

Dobra Robota!

Worked in a couple body shops, one of which was my grandpa's. We did not just replace the parts. Actually a lot similar to this video, except the binding tool. We'd repair anything if it wasn't broken into multiple pieces. Or if it wasn't absolutely bent to hell. My favorite part was always matching paints and doing the painting after the repairs though.

@@d_all_in yea probably after market plastic that will warp with the heat or has that off looking fit to it

Wrong paint, durty lighter 🤦

Cierto. 3:09

I fixed a laptop recently using small holes and zip ties 😂

​@@thaknobodi super glue and dr fixit waterproofing putty😂. I done it all

@@Manish_254 that waterproof putty is handy. JB Weld waterweld has many uses besides patching water holes

My Samsung laptop Shell Just cracked

I think that in countries like Honduras they might use it.

​@@makeintoschu 😅, in Europe most certainly not., Doesn't look best practice, im no expert. But here they bill like 200$ for just changing the front bumper.😂 Ridiculous

​@@7b0ne What this video doesn't show, however, is the painted fog lights, shitty repair that will fall off within a month, and the different shade of color not blending with the rest of the car.

​@@alanwatts8239 did you think it was bad? Record a video doing better, you useless!

You mean China’s economy would collapse because North America wouldn’t be buying all of their bumpers lmao

No way it would cost that, that whole car is 1000. You can get that bumper from a junkyard for 50-100 and replace it yourself in 10 minutes at most.

​@@davorzdralo8000un my country that car would cost 3.000 U$S and the bumper 70 dollars but my salary is about 400 bucks per month, so I'd have to fix the bumper if case 😢

@@denniss155you ride a bike then

@@diosantana2659 another one who talks only because is free.. I claimed " that car" ( not mine) cost around $3000 in my car but our salaries are too low . Consequently is always a better option to repair the bumper instead of the replacement of it.

1000$ for a bumper? What country are you from? 1000$ for a bumper is plain robbery.

Разойтись трещине не получится из-за металлических заплаток и шпатлёвки со стекловолокном (зелёная). Адгезия высокая

The steel staples will hold it in place plenty. The hole trick is really important to know about but a little too much work in this case

It was covered with masking tape. They don't show the covering step, but when you look at it while he's spraying it has overlapping layers. Then on the final shot it's nice and clean.

It was covered. People like you don't seem to have a keen eye.

He covered them !

I thought this too but he did cover them with tape yeah

@@bodaducheebodaduchee6473Would you mind elaborating? I’m just genuinely curious and I’m trying to learn as much as I can

@@bodaducheebodaduchee6473 You’re going to need a lot more evidence than that to back up your claim.

@@bodaducheebodaduchee6473 I’m not trying to prove you wrong. I’m only asking a simple question because I’m curious about your viewpoint and I genuinely want to learn. You still haven’t convinced me of anything. What’s there to be defensive about? You’re OK with me

@@bodaducheebodaduchee6473 Don’t be shy dude. Share your knowledge with me and other people so that we don’t potentially make the same mistake. You would be helping a lot

​@@mynameisyourname148 you learn from your mistakes

They are covered,can't you see its got masking tape on ? Fool

IYKYK 😂

He didn't fix the crack he just attached them back together, a crack will always spread of you don't drill a hole at the end of the cracks It's common for cymbals on drums to continue cracking if you don't stop the crack with a hole at the end

Because cracks always do this in every material. It's a literal physical separation on the molecular level. The only difference is the amount of time it takes for the separation to continue extending, which is based on the material and the amount of heat/vibration it is exposed to. By intentionally drilling a clean hole, you provide a stress relief that ceases the tearing event because it terminates into nothing. Very commonly used is lightweight firearms and cars because of all the stresses they experience with operation.

It is like a porthole or rounded corners on ship windows. Rounding spreads the stress out and prevents cracking.

How long does it last

@@Vastilious thankfully for us we don’t do it to equipment or vehicles, we do it with certain structural materials that can have leaks or damage done to them, so the repair is done in a very similar way to prevent further leakage or damage being done to them. My job is completely different then a mechanics, the only similarities are the repair it self, so unfortunately I couldn’t tell you how long that repair would last! But the repairs we do with our damaged or leaked materials are long lasting though, about 100 to 150 years for decomposition. majority of my work is buried afterwards, so the earths protecting its integrity majority of the time anyways. I work in landfills, foundations, commercial and residential properties, public parks, etc… we stop the contaminations in the earth from spreading and decontaminate areas that are needed to be done. There is a lot more to it, but regardless.

@@Vastilious longer than the rest of the bumper lol

Bizde olsa direk değiştirirler

Give it a few weeks, you'll see every crack and especially his "patch" as the filler shrinks. Don't even get me started on his wet sanding the second coat of filler...

​@@disgruntledegghead6923 good quality filler doesn't shrink

@@S-O-T As an auto body tech for over twenty years I will disagree with that. Every kind of filler shrinks, even the best kinds. The degree of shrinkage may be less with a higher quality, but it still shrinks. Unless you're using duraglas don't wet sand your filler either. Fillers are porous, and will absorb water. It'll end up looking like little rust bubbles a week or two later, just like the cracks and "patch".

@@S-O-T It only shrinks to a certain degree jackass. It's not like it continues to shrink over time, more like shrinks to show sanding scratches and poor quality patches. I know what I'm capable of, and yes I do consider myself an expert. Having fixed thousands of cars (other than my own) over my career I think "expert" is an appropriate title. But yeah, keep using cheap plastic filler on your own junk and people like myself will call it how they see it...

@@disgruntledegghead6923they’re meant to shrink so that they can come back for repairs. All these repairs are temporary and a scam, best to have the whole OEM replaced.

The labor would be more than a new bumper, plus insurance company doesn’t want to pay for that

Because it's much faster to just replace it. And in the west bumpers often aren't that expensive. So, doing it this way would be a lot of wasted time and could be more expensive if it takes more time. Because people get paid more per hour here.

A new bumper would be way stronger than the melted plastic nightmare in the video.

​@@jishani1You better hope your bumper isn't plastic. Your plastic bumper cover is basicaly cosmetic, so unless you intend on using your bumper cover as a baseball bat, you should be gine with thos repair.

Replacing is the proper way to repair IMO

I would have done it differently, using a new sheet of plastic to bond to the back and to fill in the cracks using plastic cement, but to each their own I suppose. The body filling, sanding, and painting, of course would be the same.

​@@FireRupee that is a better method, but it takes longer. Those metal clips will expand and contract and eventually crack the paint.

Or car companies can just make bumpers out of steel again, and not worry about a cosmetic repair

I'll have to order the parts. Should arrive next week. _many hours later....._ 🤑

😂😂😂"excellent repair"...khm..no, its not

@@Maks-qk7hc7hd1z go on. Explain.

@@TankswillRule 1) The bumper needs to be removed before doing this. 2) First, grab all the pieces with a soldering iron, then solder with plastic strips on both sides (according to the type of plastic of the bumper itself). Different materials are unacceptable, because when driving, the bumper is subjected to different loads and will most likely burst, if not along the seam itself, then along it. In addition, you will be surprised why your bumper is rusted, and it's because there are staples that no one has treated, at least inside. 3) The putty should be for plastic, he uses universal (yellow) and fiber (green), the second is a particularly big mistake on the bumper. Bumper putty and fiber putty have the same price, but why he use fiber? 4) there should be a primer between the putty and the paint, it is very important 5) before painting, you need to matt the surface that will be covered with paint, and the author has matted only the putty These are just the basics, I'm not even talking about the transition between the old paint and the new one... and not only. Everything looks better in the video, but if you looked at the result in person, you would never pay for it. And after a while it will look even worse. That's why no one does this in normal workshops in my country. For people who paint cars, it's not a repair, it's a very bad done job, he has the materials, the conditions are there... if only he had a little more effort and knowledge of painting. Even if there is no plastic for soldering, you can cut it out of a similar bumper. But no... and for ordinary viewers it looks like "wow". Sorry for my English)

It's quite difficult to do that. A better option is repaint whole bumper.

I saw the hardline too 😢 maybe it was a budget fix

Where are you getting those prices? I can get that plastic bumper for less than $200 new. In most cases i can find it in a junk yard for $50 and if im lucky I find one the same color

@@user-cs3zs6jn1d try new vehicles, and you'll see those prices. Toyota, Honda, Nissan, Ford.... doesn't matter.

@@Jeremiah_Johnson139 ok. Just searched for a front bumper for 2023 Honda civic. Not painted, $176 plus shipping. Im sure other makes might cost a little more. Maybe

​@@user-cs3zs6jn1d 700 for my Volvo and not even oem

4 Stunden sind realistisch. Schweißen eine halbe Stunde, schleifen, glasfaser ne Viertelstunde. Füller ne halbe Stunde. Basislack und Lack dauern ne Stunde. Die lackierung ist ist nur leider mist und hält vielleicht nen monat, zu schlecht vorgearbeitet.

If I remember correctly, it's a type of plastic welder, and the clips are known as staples

@@Jarombean Thanks!

It’s called a hot stapler

So every 4 years u decide not to fix ur bumper...if u done this 3 times it migbt be time for a new car, or at least a mechanic.

I didn't know tools like this existed. I just went to the junkyard, and bought a replacement bumper, had it painted, and installed it.

Pra fazer essa porcaria as baquetas contratariam ele com certeza.

Isto não é um bom trabalho. O pára-choque tem uma função técnica que é de proteger o carro e vc. Este tipo de coisa é só pra ficar bonito. Toda função do pára-choque deixa de existir.

​@@Mestre_Linguica Sabe de nada!

@@marcelosrn4805 quem?

To be fair have you ever really thought at all?

Hi, can you please give the name of this tool I want to buy it and fix my broken bumper by myself

Lol Love how they gave the fog lights a nice paint job too Clearly the "old ways" are the best ways

That was when everybody got whiplash from minor accidents

Finally someone saw the paint on the fog light

👍

Такой ремонт для жарких стран. У нас большие перепады температуры и влажность.

@@mirymir2282 да это вообще не вариант для ремонта даже в жарких странах. Просто гАфноделы с тремя классами образования не умеют иначе

Of course oem wouldn't recommend, because it's mean less part for oem to sell. The mechanic would know if the bumper would have sensors. But most cheaper/budget car in 3rd world country doesn't have the sensor and don't really give a damn about it.

He also sprayed the fog light pretty good

Amazon. It's a plastic welder

@@Onwaxwings Thank you.

Bring back metal bumpers

Sin consumismos no hay empresas. Sin empresas no hay trabajo, sin trabajo te mueres de hambre