Car camper kitchen sink faucet comparison: Testing 4 different battery powered water dispensers

No video

Car camper kitchen sink faucet comparison: Testing 4 different battery powered water dispensers

Рет қаралды 125,865

Күн бұрын

In my original car camping kitchen video, I showed a simple setup with collapsible sink and USB rechargeable faucets originally designed to pump water from a 5 gallon bottle as a super simple kitchen sink. This is a follow-up from my full car camping kitchen setup video ( • SUV car camping kitche... )
Unfortunately, the one I used dripped when the water bricks were too high above and I dropped it and messed up the touch sensitive button so it doesn't turn on and off reliably. I bought 3 new faucets from Amazon, ranging from $10-16 and tested them out to see which is best.
Original faucet that broke - $22 (I got it for $20 with coupon)
amzn.to/3je0g0u
Smallest faucet - $16 (I got it for $10 with coupon)
amzn.to/3HKfGUw
Faucet with metal tube - $16
amzn.to/3W8Al9k
4 button faucet - $15
amzn.to/3PCDz2m
3.5 gallon water bricks
amzn.to/3jbsEjY
6mm ID / 100mm OD food grade silicon tubing
amzn.to/3hEyNoj
1/2 inch PET Expandable Braided Sleeving
amzn.to/3V21yJf
Magnets used for the base
amzn.to/3FuxZKM
Magnetic steel sticker used on the drawer to connect the faucet to
amzn.to/3V7MSIw

Пікірлер: 230

@666awesome666 3 жыл бұрын

was rooting for the toilet paper roll, glad it got an honourable mention!

@todd.parker 3 жыл бұрын

I still like that little guy. Feels indestructible.

@slyflea 3 жыл бұрын

Like the idea of a rechargeable faucet as seen on your first review. This video is worth its weight in gold!!

@uhlemaennchen 10 ай бұрын

Hey Todd - that video is brilliant. I'm about to build a small Camper in New Zealand and I found a pump like that in the supermarket. So I started doing research and nowhere I could find information if that would actually be able to pull water up like a meter or so. Except for you video. So happy I found that. Thank you so much - I really do appreciate it :)

@AnchorOnLandLisa 4 жыл бұрын

I bought 2 of your original water pumps. I will install mine as part of the water bricks. Thank you so much for your build. I love it and will use parts of it in my own build.

@todd.parker 3 жыл бұрын

Awesome! Thank you!

@mrs.onyango6504 3 жыл бұрын

Thank you for your time and effort’s to show us this can be done

@altitudeiseverything3163 4 жыл бұрын

Thank you! This is tremendously helpful to those of us planning a conversion! 👍

@todd.parker 4 жыл бұрын

Glad it’s useful! I needed a replacement and figured others would want to see how these things compared

@foresterboy2011 3 жыл бұрын

Hello Todd, I think the only option here is to fit an inline isolator between water brick and faucet. That way it won't matter how high the water brick is. Just an idea. Keep up your good work and vlogs. From the UK 🇬🇧

@DMVnomads Жыл бұрын

With the Dentist Office version you can simply spin the silver faucet 180deg to where it will face straight up, completely eliminating any dripping. I've actually been using this version extensively for over a year, and it's been sitting in my Jeep on a Reliance container, full time, being hammered down bumpy forest roads, 4wd trails, etc. It has 100% surpassed my expectations for reliability, performance, and the charge lasts an incredibly long time! I've never used the others, so no comparison for me.

@cathietonkin5577 4 жыл бұрын

Thank you for the testing.... saves a newbie time and money! Good idea to have a back up too! 💚💛🧡🤎 your videos!!!

@todd.parker 4 жыл бұрын

Thank you, I really appreciate the kind words

@sheri4673 3 жыл бұрын

@@todd.parker Outstanding video, all the things I want to know before purchasing. I just looked at Amazon reviews, every one star review has the same complaint, it turns on by itself - there's quite a few of them. How has this worked for you over these months?

@OP-mz3hr 2 жыл бұрын

You are so awesome. Love all the testing. So cool and insightful :)

@arickauyang1632 4 жыл бұрын

Loved your idea and already built mine to mimic! One suggestion. Instead of a roll of tape, I actually got a 2" pvc plug (non threaded) at HD which actualy formed a nice snug fit to the bottom of my faucet (like your original one). I drilled a whole in the pvc and it's a nice clean install. I was even able to put the magnets on the inside of the cap so it's just a nice smooth surface! Thanks for the idea and reviews!!

@todd.parker 3 жыл бұрын

Great tip!

@robert-roy-britt 2 жыл бұрын

Thanks for the thorough review. I bought the “toilet paper” faucet and married it to a Reliance Aqua-Tainer cap via DIY (cut the Reliance faucet and retain the threads, then marry with a lucky-to-find PVC pipe fitting and some epoxy). Great improvement in my overlanding water system.

@todd.parker 2 жыл бұрын

Cool to hear. I got a flip style one fur my minivan build that I really like

@jamesdhardy Жыл бұрын

Wow! Thanks so much. Can't tell you how helpful this was Todd.

@timlove2758 Жыл бұрын

Nice, informative, and thorough... great video dude🤘 I didn't know I needed one of these until I seen your video 🤙

@todd.parker Жыл бұрын

Thanks! 👍

@eto2352 3 жыл бұрын

amazing review. thanks so much! The four button model is updated design. Hoping it does well. Great test!

@todd.parker 3 жыл бұрын

Hey thanks!

@stevenschenck7275 3 жыл бұрын

Great video and super helpful in picking one for our camper.

@jnet80 3 жыл бұрын

Thanks for your comparison. I did test out my sink faucet, I used your idea with modifications to work for me (I’ll share next camping trip). Thanks for sharing your idea. Same as you the original fell and stop charging. I ended up getting the dentist as a back up coz we had another camping trip the next day. Love the original design got another, but also kept dentist for backup.

@todd.parker 3 жыл бұрын

Funny you dropped yours too. That touch sensitive button is just too fragile I think. Glad you had a backup!

@jnet80 3 жыл бұрын

Hi Todd- modified so my faucet doesn’t fall down and break again 😩 - here’s my sink thanks for the inspiration! instagram.com/p/CE8ultIDTLX/?igshid=85rj6va8kv3o

@Lucy_Honeychurch 3 жыл бұрын

Thanks for this. I have seen other you tubers install these pumps on a piece of pvc tubing to make them taller. I like the one with the metal spout best so I think I will do that.

@todd.parker 3 жыл бұрын

Yeah, in my latest build, I used some PVC pipe and it works great

@lifemyway200 10 ай бұрын

I have the metal spout and have it on pvc pipe now, but yes they are all made to sit on a 3-5 gallon jug, not a table top.

@xboomer3004 3 жыл бұрын

Nice test.... solution to dripping.... CUT OFF VALVE on hose. Solution for small faucet.... build a metal stand for the height you need... metal bottom for magnets... top has a lip and sides so it can rest on top and not fall off.

@roberthutchins1507 3 жыл бұрын

A couple of years ago I bought a Coleman camp kitchen. I set the sink up with one of those rechargeable camp shower wands. It works great for cleaning up, I'm not so sure about the drinking part though. I just pour the water straight out of the jug.

@bentnickel7487 4 жыл бұрын

You do comparisons, the way I do comparisons. I subscribed.

@todd.parker 4 жыл бұрын

Super obsessive? Yep.

@bentnickel7487 4 жыл бұрын

@@todd.parker No doubt, you know of "Project Farm" here on KZfaq. I think you're right there with him, but on a smaller scale. That is a compliment, by the way. :-) ;-) :-D

@todd.parker 4 жыл бұрын

@@bentnickel7487 I love his videos, he's so methodical. My wife thinks I'm nuts watching those but I love applying a bit of science to reviews and comparisons.

@secondact7151 3 жыл бұрын

My "dentist special" type easily has the metal tube get knocked out. Easy to put back in, but annoying. It also started to not work on my last trip intermittently, so I bought a back up that happens to be the four button. I also use a water storage that has its own spigot to have a back up to a back up. I have been using my set up as a pandemic/allergic to scented hand-soap hand wash station that is always with me.

@thefoolsadventures 3 жыл бұрын

Thank you sooo much loved you vid..the only one I could get was the dentist one in Australia but a tap like these camping can't complain to much.

@todd.parker 3 жыл бұрын

The dentist one is quite smooth and quiet, even if the design is a bit quirky. Glad it worked you!

@bethzolin6046 5 ай бұрын

Great test. Thank you.

@fbicontacted7690 2 жыл бұрын

Great video! Extremely helpful, thank you.

@Misskiff 2 жыл бұрын

This is brilliant perfect for what I need. And I can attach it to the outside of my van when I need to shower 🚿

@haylee7951 2 жыл бұрын

Thank you! Great video! I plan on getting a van soon and I was thinking of turning a small desk I has into a sink so I thought getting one of these faucets would be cool. I think I’ll go with the dentist special lol

@todd.parker 2 жыл бұрын

Cool. In my minivan camper video I’m using one I like even better if you want to check that out

@colingibson9557 4 жыл бұрын

Thanks for the video, it has been really helpful 👍

@todd.parker 4 жыл бұрын

Glad to hear it!

@teresakuehl982 Ай бұрын

Nice job dude

@amydelpiere9315 2 жыл бұрын

Dentist special! Hehe. That was helpful. We are looking at using one of these for a vintage truck camper renovation.

@todd.parker 2 жыл бұрын

Cool. See my newer minivan video for another one I like even better

@raqueldebart5710 2 жыл бұрын

THANK YOU thank you thank you for that video!!! It save me a lot of worries and money!!!

@bigrobsvan Жыл бұрын

Zombie comment... thanks for the reviews! Based on this I just ordered the "four button" one (which only has two buttons now, but looks identical). Also, the size of the tubing was SUPER helpful. I've been looking everywhere for that information!

@todd.parker Жыл бұрын

So happy this was useful. Thanks for watching

@johnhendershot5625 4 жыл бұрын

I bought the same faucet as your original - per your build - I loved the idea. I haven’t dropped it (yet) and it seems to be working great. The splash is a bit excessive but manageable. My issue is creating a good magnetic attachment to insert into the base of the faucet. Mine works but it’s a bit sloppy. A closer look at how you did your attachment would be super helpful. Thanks!!!

@todd.parker 4 жыл бұрын

Great to hear it's working well for you! This is what I used but I may try the larger ceramic magnet for the 4 button when I notch it out. The weight of the tubing can cause issues since it can pull it away. Magnets used for the base www.amazon.com/gp/product/B07MV2MKD5/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Magnetic steel sticker used on the drawer to connect the faucet to www.amazon.com/gp/product/B01LZAYD8X/ref=ppx_yo_dt_b_search_asin_title?

@friendofyoda5194 Жыл бұрын

Great content, good work!

@todd.parker Жыл бұрын

Much appreciated!

@ReneaDooserider 2 жыл бұрын

Best video ever thank you for sharing. I prefer a black color, but I love the way you put the video together really good job.

@emaworks9306 2 жыл бұрын

Nice review! I also like the 4 button one. I think the 8 ft test is a bit flawed tho since water can easily continue to flow once it started already so if someone actually installed it 8 feet above it might not work.

@patricechilds 11 ай бұрын

Great! Great! Great review 👏🏾

@That_best_Arkansas_guy 3 жыл бұрын

Awesome video. Thanks for doing all this research

@todd.parker 3 жыл бұрын

Glad you liked it!

@t.t.of888 3 жыл бұрын

Great reviews thanks

@kimdagnillo8246 2 жыл бұрын

Great ideas Todd, I’m borrowing 😬

@OverlandOne Жыл бұрын

Awesome video, thanks for the info.

@iQuantium 3 жыл бұрын

Great shootout review! Only one thing is missing... The Drop Test. Obviously this will cost more but that would show the true winner since the 1st one ( sci-fi design ) failed the the unplanned drop test.

@todd.parker 3 жыл бұрын

True! The 2 I recommend are both super light so I bet they wouldn’t crash as hard. The short one is probably indestructible

@bjnslc 10 ай бұрын

Thanks for the comparison. I'm going to modify one to fit directly into the cap on a Spectre jerry can. The "dentist's office" style strikes me as best for my use, and I like how the spout is removable for compact packing. The mini might work, but seems to have too little overhang for easy use filling water bottles and cooking pans.

@todd.parker 10 ай бұрын

Good idea, I might try something like that too

@64MAGA24 2 жыл бұрын

Really great and helpful post. I’ve been using the manual Walmart hand pump version but it’s really kind of a pain in the behind. Thanks to your post I’ll be going with the 4 button version. Also ordered the FG tubing u suggested. Where did u get the magnet with hole. I really like this idea as it’ll keep my tablet clean looking. My set up to now has been pretty wonky. Look forward to more helpful posts from you😀

@todd.parker 2 жыл бұрын

Thanks! For my latest build I used one large magnet like this: CMS Magnetics Powerful Cup Magnets 80 LB Holding Power Dia 2.65", Large & Strong Ceramic Round Base Magnets with Mounting Hole, 3 Pieces www.amazon.com/dp/B0195UQBFS/ref=cm_sw_r_cp_api_glt_fabc_W40KWXHKGYH3Y2RS20CV

@karendelosreyes2385 3 жыл бұрын

very good review

@Photosbydrew 3 жыл бұрын

Dentist special for me! Going to wrap the stainless tube in a black heat shrink so it’s not so ugly

@AkumaQiu 2 жыл бұрын

Thanks for the info 👍👍👍

@idahoverland_208 4 жыл бұрын

I had built a similar setup a few months ago with the “dentist office” style pump. I chose it since the tube can come off and store more compactly, and tube height was not a concern. So far it works well, and would agree the power button is probably the weak point. I used the larger single piece magnet which works very well. If I replace it, I’ll probably go with the toilet paper roll style based on your video. Thanks.

@todd.parker 3 жыл бұрын

That's great to hear your experience with this setup. Do you experience any dripping or is you water supply lower than the pump?

@idahoverland_208 3 жыл бұрын

Todd Parker it didn’t on my initial test, but when I filled the tank to full, my connection leaked at the tank, so the rest of the time the tank was lower than the pump.

@pjju2519 2 жыл бұрын

How did you attach your circular magnet? I bought the magnet and a circular metal washer today and am looking for simple solutions.

@idahoverland_208 2 жыл бұрын

@@pjju2519 I epoxied the magnet to a short PVC pipe section that the faucet will friction fit on

@StukHere2 Жыл бұрын

Thank you! I’m 70, a total novice regarding anything DYI and was wondering how these worked and the setup!

@todd.parker Жыл бұрын

Glad it was helpful!

@mandyklein6927 3 жыл бұрын

Nifty ideas thanks

@JRR31984 4 жыл бұрын

Very GOOD video.

@todd.parker 3 жыл бұрын

Thank you very much!

@norsefalconer 3 жыл бұрын

I believe these are all made for the "water cooler" type bottles, correct? I guess that could explain why the manufacturer didn't worry about syphoning, or the height of the dispenser nozzle. In any event, this was a very thorough and informative review. Thank you very much!

@todd.parker 3 жыл бұрын

Yep, exactly. Glad you enjoyed it!

@carolhewett3756 4 жыл бұрын

After watching all of these I've decided to just pour water out of a one gallon jug by hand into a dish pan so my challenge would be to get the water from a water brick to a jug.

@experiment0190 2 ай бұрын

While traveling and living in a car for long days even small(conveni) automation will be very relaxing and stress relief.

@corobco 2 жыл бұрын

Вот это тест. Спасибо большое за ваш труд. Вы сэкономите много времени другим людям. Спасибо большое от нас всех.

@todd.parker 2 жыл бұрын

Thanks for watching. Translation: "Thank you very much for your work. You will save a lot of time for other people. Thank you very much from all of us."

@coralieofjumpwithnofear Жыл бұрын

This is a really useful video. Thank you! I was looking at these types of water taps quite a while ago and didn’t end up getting one because the prices were all over the place, but didn’t seem to be a good indication of quality. Now I see that Dometic has one, and I’ve pre-ordered it. Much, much, much more expensive than the ones you got, but I hope that the quality is there and that it’ll last.

@todd.parker Жыл бұрын

I’m curious how the Dometic faucet is, let me know how it is!

@coralieofjumpwithnofear Жыл бұрын

@@todd.parker I’m stupidly excited about it and can’t wait for it to arrive. LOLOL! I’ll be doing a video on it once it does. I did a review of the Dometic water jug which arrived this week. It’s also amazing.

@coralieofjumpwithnofear Жыл бұрын

@@todd.parker It arrived, and I’ve tried it out and I love it! I’ve done a review of it that’ll be published in about 24 hours from now. I also mentioned your vid in mine. 😊

@todd.parker Жыл бұрын

@@coralieofjumpwithnofear link up your video here, I definitely want to check it out!

@coralieofjumpwithnofear Жыл бұрын

Thank you! I’ll drop the link in tomorrow once it’s up. 😊

@hafeitsa 3 жыл бұрын

Thank you for your video...it is very useful! Truly inspired with both the portable tap and the collapsible sink. Can you please share with us in general, where did you get the sink? It looks more than practical enough for our usage. Thank you and best regards...enjoy camping! 🤩👍

@todd.parker 3 жыл бұрын

Thank you! Links to products are in the description

@chadperling2766 3 ай бұрын

Thanks! Short one could be mounted on a piece of wood. Can you follow up with the four button to see how accurate the measurements are? Would like to see a test of foot pump faucets.

@andykentbristol 3 жыл бұрын

Really helpful video, nicely presented, thanks. Can any of these be attached to a worktop?

@todd.parker 3 жыл бұрын

Sure, I used magnets in the bottom to connect to by a metal ring

@deejay3796 3 жыл бұрын

Great idea what kind of tapenis used to seal the hose?

@cameronjohnson3847 3 жыл бұрын

Hey there, super useful video! Thanks for making the time to pull it together. Do you have the link to the 4 button faucet you ultimately recommended? The one linked in the description looks different (the reach of the pourer looks shorter). Thanks!

@todd.parker 3 жыл бұрын

Hmmm. They might have redesigned.

@randomowl2056 Жыл бұрын

Thanks!

@todd.parker Жыл бұрын

Thanks so much!

@gn3ricc 3 жыл бұрын

Could you make a video on how you made the water brick hose and sleeve? Looks clean!

@todd.parker 3 жыл бұрын

It’s pretty simple. I just bought some plastic loom and pushed the silicone tubing through then added shrink wrap to the ends

@quokkanox 3 жыл бұрын

these pumps are designed to be above the water brick so in a camper or van it should be fine

@guowenzeng8304 3 жыл бұрын

If you want to get him for free, you can contact me

@happyhusky4283 Жыл бұрын

Do you know any heavy duty ones ?

@quokkanox Жыл бұрын

@@happyhusky4283 not particularly sure, but if quality is a priority the just get a normal sink tap.

@yanstev 3 жыл бұрын

Thanks for the post, I really like your narration tone and tenor, very soothing and professional. Do you have an estimate of how much water the battery can pump per charge, and how often you have to recharge it? I'm thinking that it might be just as easy to plug a 12 volt pump into a cigarette lighter, if I have to worry about keeping the battery charged, as there does not seems to be any charge indicator on any of the pumps. I assume that they all use a similar battery, is that true? Also, do you know the battery chemistry and whether or not the battery can be replaced on any of the pumps? Lastly, it would be great if you could update with any durability information. I'm trying to decide if these battery powered units will function adequately compared to a 12 volt dedicated pump system for RV hand/dish washing sink.

@todd.parker 3 жыл бұрын

I think these all use lithium cells but smaller ones. They claim to pump quite a bit of water so seems you'd need to charge them weekly at most? On their Amazon pages, you'll find specifics.

@ChibiChula Жыл бұрын

Have you tried any new pump comparisons since this one? I'd like to see comparisons with the newer faucets, especially the ones with the folding spigot. 😁👍

@todd.parker Жыл бұрын

I used the folding style in my newer minivan build and it’s my favorite by far: kzfaq.info/get/bejne/rbN9jMlo1bipk5s.html

@brianrowan6358 3 жыл бұрын

Hi mate, nice video. Been looking at taps to go on a large open mouth screw cap bottle, I know these are not made to attach to one. I see you adapted one, so if I drilled the right size hole then use silicone or glue to adhere a screw cap (airtight) for the bottle I use is there any reason you think this will not work? Cheers, Brian

@todd.parker 3 жыл бұрын

Seems like a good idea

@hawaiidogs9277 3 жыл бұрын

Ty sir

@xuankhanhtrinh208 2 жыл бұрын

When begin do kitchen box, i think those pump, but in taobao have many kind of pump 60W can shower and very cheap use 12V. It only 60RMB for pump and shower, very cheap if use it with 12v car output, for safety, you can bring more lipo battery 14.8v for start car when car battey empty

@jasonmcnamara7127 3 жыл бұрын

Great video!!! So I want to do something like this in my semi truck so I can have a sink/water to fill dog bowl and for dishes if needed. Can you advise how you set up your water brick with the hose?

@todd.parker 3 жыл бұрын

Sure, I cover that in detail here: kzfaq.info/get/bejne/Y9Kepc2J3q-7fGw.html

@a.w.thompson4001 3 жыл бұрын

Thanks!

@johnskillen6208 7 ай бұрын

have you put a hose on baby pump,

@nwlady1844 4 ай бұрын

thank you for this video. Question... what to you use to glue the magnets to the bottom of the faucets? In the video, showed the 6mm ID tubing but I saw a green and then a black more web looking tubing? Is that a cover for the opaque silicone tubing? or some other tubing used instead of the 6 mm tubing you mentioned? thank you

@todd.parker 4 ай бұрын

I have some webbing over the silicone tube’s because they’re sticky and get dirty easily. To attach the magnet, I added a block of wood in the base and screwed the magnet to that. Check out my minivan camper video - I show it in detail

@alanbretherton4426 Жыл бұрын

I purchased one like the dentist special and it started leaking so the seller refunded my purchase fee. Bought a second one a year is so later and the charging port fell inside the unit after 5 charges. So I would look for a better quality unit for RV use. Maybe I just had bad luck?

@Min-gj8ri 3 жыл бұрын

Could you please explain how the slide under board build?

@todd.parker 3 жыл бұрын

Watch my earlier car camper video for the dull details

@bikebum2006 5 ай бұрын

How did you secure these to the counter for the end use of the keeper? Are those earth magnets glued to the underside?

@todd.parker 5 ай бұрын

Yep! I have a metal ring on the counter and attached a ceramic magnet to the bottom of the faucet. See my minivan camper video for details

@KaiMirra Жыл бұрын

I've been using one of these in my camping setup, any ideas how to clean and sanitize the faucet and hose between uses? My hose got funky (mildew?) and I'm sure the faucet has as well.

@todd.parker Жыл бұрын

You could run bleach water through it. If you see mold, you should definitely replace it and consider doing the same for the faucet

@Lovelace069 3 жыл бұрын

Hi..do you happen to have a link for the water brick and the collapsing sink?

@todd.parker 3 жыл бұрын

In my car camping video there are links to all the products I used

@justinhammondphoto Жыл бұрын

They stopped making or providing that 4 button one on Amazon. Bummer!

@vkmariner1 Жыл бұрын

Hi What fitting did you use on your water brick cap to connect the tube? How did you install it? Thank you

@todd.parker Жыл бұрын

Watch my SUV camper video - I show that in depth

@happyhusky4283 Жыл бұрын

How did you mount these faucets on the countertop ? Also are any of these outdoor rated ?

@todd.parker Жыл бұрын

Check out my minivan camper video where I show how I built a magnet mount that works great. These are not outdoor rated unfortunately, Check out the Dometic Go faucet - it might be more rugged but is 10x more expensive.

@debjustdeb4301 3 жыл бұрын

I wonder if the 2 smallest faucets are meant to sit on top of a sparkletts type bottle?

@lifemyway200 10 ай бұрын

They are for sure.

@jstephenf9546 9 ай бұрын

Unfortunately, the four button model is currently unavailable

@hendriahin2388 4 жыл бұрын

Hello.. Thank you for the comparison, may I know what is the magnet name? And where to buy it? Thanks

@todd.parker 4 жыл бұрын

Magnets used for the base www.amazon.com/gp/product/B07MV2MKD5/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Magnetic steel sticker used on the drawer to connect the faucet to www.amazon.com/gp/product/B01LZAYD8X/ref=ppx_yo_dt_b_search_asin_title?

@hendriahin2388 4 жыл бұрын

@@todd.parker thanks for your info.

@teatea8473 2 жыл бұрын

Where can I find the magnet holder in the video?

@todd.parker 2 жыл бұрын

I just attached some magnets to the bottom with hot glue

@Afeeq1011 4 жыл бұрын

2:42 lol wasn't expecting malay here, it's Indonesian instead of Malaysian.

@ferretface8782 2 жыл бұрын

The dripping got me thinking to just have a gravity fed system. Two tanks on roof. One insulated for cold water, one black for hot.

@6foot8jesuspilledpureblood82 2 жыл бұрын

Putting water weight on the roof of a car is a bad idea

@ferretface8782 2 жыл бұрын

@@6foot8jesuspilledpureblood82 Not a "car"... A very sturdy cargo van with extra reinforcement roof beams. The tank will be only inches in height, but width of entire roof... for even weight distribution. 5-10 gallons of water, 40-80lbs... less than two bicycles w/rack.

@jonplay3602 2 жыл бұрын

Do any of these actually screw onto the 5 gallon water jug for a seal? I'm a trucker and want to be environmentally friendly but things jump around

@todd.parker 2 жыл бұрын

It’s a loose friction fit but I bet you could wrap some tape around the top to make it tight and strap the bottle down so it doesn’t tip

@TheHeatherhales1988 2 жыл бұрын

Do you know what size the tubing is? Mine is to short

@todd.parker 2 жыл бұрын

Hi. I linked to the tubing I used in my suv car camper video description

@GreenlifeFin 11 ай бұрын

I have one usb chargeable pump installe on my van table. The problem is that is leaks from down, at the bottom. So I have to dry my table every time I have used the pump. Not nice. Anyone has a pump that does not leak/have holes or gaps in the bottom? My water backet is on the floor, so dripping from the hose is not a problem.

@Emily-cl4vm 3 жыл бұрын

If I connected a water heater, would it be safe to use these with hot water?

@todd.parker 3 жыл бұрын

Good question. I’d think it would be fine since hot water for washing really isn’t too that hot.

@candisblair447 10 ай бұрын

question- how does the tube go into the water brick? I am a total novice.

@todd.parker 10 ай бұрын

I drilled a hole in the cap and pushed the hose through. Not 100% leak proof if you tip it over but it's stored vertical in the car

@Lovelace069 3 жыл бұрын

Oh and can it handle warm /hot water dispensing?

@todd.parker 3 жыл бұрын

Good question, I haven’t tried that

@amyblack9251 4 жыл бұрын

Oh my....that drug on!

@Stephan5150 3 жыл бұрын

I've watched a couple of your videos and you got a new subscriber today. Let me return the tip, hope you read your comments! I do tech support and the amount of people that get their accounts banned from Amazon for too many returns is a real thing... Wouldn't want you to think you can just buy and return stuff willy nilly like that as it will catch up with you sooner rather than later. My .02 watts.

@todd.parker 3 жыл бұрын

Hey thanks. I actually try to avoid returning things to Amazon now that I know they throw away the majority of products. So wasteful.

@DarkMoonDroid 3 жыл бұрын

Did you do any reviews of non-usb pumps? I hate usb anything. They eventually lose their charge capacity so they only work for 30 seconds. I prefer solar or just hand-pump.

@todd.parker 3 жыл бұрын

Sorry, no.

@raymondclark1785 2 жыл бұрын

My father's class b used a marine foot pump which was nice because it keeps both hands free for washing dishes or yourself

@jenniferstephenson Жыл бұрын

@@raymondclark1785 Yes! These are great.

@mileswatkins2162 2 жыл бұрын

Whats the best way to mount it

@todd.parker 2 жыл бұрын

Watch my minivan build because I show some details on how to do it

@richardlao1111 4 жыл бұрын

What would you recommend to get , thanks

@todd.parker 4 жыл бұрын

I think the 4 button one is probably the best of the 3, but the little one is also pretty solid. Links in the description

@richardlao1111 4 жыл бұрын

Thanks

@indigodande4345 3 жыл бұрын

problem: it isnt universal for all 5 gallon jugs especially the blue ones... mine has a screw top and the faucet i ordered doesnt fit.

@todd.parker 3 жыл бұрын

I think these are intentionally loose on a 5 gallon container so there isn't an airlock

@dtec30 3 жыл бұрын

try putting a check valve inline with the tank hose

@todd.parker 3 жыл бұрын

I was looking into that but the problem is the water is flowing in the direction you need it to go with the pump on. It’s not a reverse flow issue, it’s a back pressure one.

@dtec30 3 жыл бұрын

@@todd.parker yeah but a little spring pressure once the pump has stopped will help with the dripping

@dtec30 3 жыл бұрын

or you could make a weighted valve

@todd.parker 3 жыл бұрын

All good ideas. In my next build I’m going to have my tanks below the surface to avoid the issue but not everyone can

@snapfly7 2 жыл бұрын

Did you find a reliable way to mount this style of faucet to a counter top?

@todd.parker 2 жыл бұрын

A 2” PVC pipe fits in the base. You could use a flange or I wedged in a piece of wood and bolted a big magnet on the bottom. I’ll cover it in a future video

@snapfly7 2 жыл бұрын

@@todd.parker that would be awesome, thanks!

@pjju2519 2 жыл бұрын

@@todd.parker Can't wait till see, I have a couple supplies now trying to figure out best way to mount with circular magnet and metal washer. Thinking i need to cut out proper sized circular wood plugs. Or create a pvc riser since my dentists special needs more gets anyway...

@todd.parker 2 жыл бұрын

@@pjju2519 I wedged a 2x2 piece of wood in the base of the PVC pipe (was pretty tight, had to lightly round the corners for it to squeeze in) and added one countersunk screw through the PVC and into the wood to made sure it wouldn’t slide out. That gave me a flat piece of wood at the end of the pipe and I used that to mount a large ceramic magnet to the bottom - it had a hole in the center for a screw. On the surface, I just took a circle of steel, drilled a hole in the center and screwed that down to the wood top. That’s it.