Car ramp-homemade

Рет қаралды 413,487

Ivica Poje

6 жыл бұрын

Car ramp-homemade

Пікірлер: 224

@DLex912 2 ай бұрын

A moment of silence for the person who works under that car ramp.

@Your-Local-RX-Guy 2 ай бұрын

Worked*

@kayakfishingforpredators9107 2 ай бұрын

He/ she was such a nice person 😢😥 and always ready to help someone 😒

@user-lb7nn1jh9n 2 ай бұрын

A catastrophe waiting to happen,

@dongordon4464 2 ай бұрын

Yes who "were" they?

@jonathancrincoli6263 2 ай бұрын

A moment of silence for that pressure plate

@UTAH100 2 ай бұрын

2 rules. No DIY surgery and no homemade car ramps.

@impRZA 2 ай бұрын

Lol 😂

@MS-Fin1917 Ай бұрын

@@impRZA I can buy chinese ramps, so can I buy chinese surgery online as well? 😄 As fore those ramps, for a Golf-sized car on hard surface, they are more than strong enough if diagonal supports are added to both pillars. I would also connect the ramps together from bottom as well, then they would be even more stable. Now the surface against the floor seems uncomfortably narrow.

@2bfrank657 Ай бұрын

Except for the Russian doctor who got appendicitis while posted in Antarctica and had to operate on himself - totally legit to DIY in that case.

@xl000 Ай бұрын

everything is homemade if you think about it

@UTAH100 Ай бұрын

@@xl000 Yeah but safer if made by a highly educated Engineer and tested many times for safety and reliability. That is the difference. Even drugs are homemade. Hence the words Clinical TRIALS. As simple humans, we basically try many things until something sticks. Many discoveries were had by failed experiments e.g., Viagra and Post it notes. I love innovation and yes, studied Engineering.

@user-rr7je8iw3b 4 ай бұрын

Introducing the new home made car lift, "The Death Trap 2000"...😂

@CurlyFromTheSwirly 2 ай бұрын

☝️ this 😂

@scottw.7441 2 ай бұрын

Who's front porch railing is missing?? 😂🤣

@farnthboy Ай бұрын

What goes up must come down.

@michaelboykin9881 2 ай бұрын

Could be modified a bit, like a wider footprint and ramps. As is , it looks like an oil change would be a suicide mission.

@davidreynolds3082 2 ай бұрын

Slightly wider treads, a cross-brace at the bigger end and taller end-stops would be beneficial ;)

@ben68442 19 күн бұрын

It could be a good idea if it actually was built correctly. This design shown here is perfect if you are trying to kill yourself or destroy your vehicle.

@michaelbuchholz2164 2 ай бұрын

Our friends in eastern europe are fearless engineers 😊

@spud13x13 Ай бұрын

Not to mention FEA-less and DFMEA-less engineers. And who says engineering humor can't be funny?

@LionelMessi-ct7tu 2 ай бұрын

What could possibly go wrong?

@mr.superwetter4193 2 ай бұрын

Whet weels!

@ben68442 19 күн бұрын

Everything.

@feynthefallen Ай бұрын

When this video popped up in my recommendations, I thought it would either be amazing or hilarious. I was not disappointed

@Simon-bu4kc Ай бұрын

nice, now you can go ahead and replace the clutch because I can smell the remains of the old one even back here 😜

@louscannonmagoo9989 2 ай бұрын

Very good use of dexion shelving! The polystyrene end stops and plasticine took tray only come with the deluxe version. But that nearly doubled the price at £21.99.

@arlisspropertyservicesllc5943 3 жыл бұрын

Well that looks handy..for replacing the clutch, trying to get it on. 😉😉😉

@bendude6748 3 жыл бұрын

Not much use for replacing clutch, you need to take wheels off

@aqib2000 2 жыл бұрын

@@bendude6748 axle stand on the car stand LMFAO. But how the F do you get the car up there

@wojciechorowski5453 2 ай бұрын

And bravo to the designer, we haven't been chased by saber-tooth tigers in the forests for a long time, and somehow we need to regulate the size of our population.

@BandiMasha 9 ай бұрын

Dangerous beyond belief 😂😮😅

@silvervisage5096 2 ай бұрын

Yeah, I wouldn't get under a suspended car either. A ramp in the ground made of concrete is a different story. I don't trust hydraulic lifts either.

@timothywelch6450 2 ай бұрын

Darwin award winner of the future

@timhnartiel 2 ай бұрын

Was I the only one pessimistic about how that would end? 😂

@Google_Does_Evil_Now 2 ай бұрын

It's an isosceles triangle and the weight is pushing straight down on the two slants and the forces are trying to push the 2 bottom legs apart. There's no lower connecting strut to counter the 2 outward forces. That's how it looks to me. What do you think?

@muptwitch9129 Ай бұрын

Its conected in middle where it pivots ( its 1 huge ramp not 2 ramps)

@ianstephenson9471 Ай бұрын

You need more matchsticks supporting it son.

@miketayse 2 ай бұрын

Scary and impressive!

@johno4521 2 ай бұрын

I dont think the bracing is strong enough to prevent it collapsing length ways Whilst it's pivoting those 2 front legs are taking the whole weight of the car...

@Delibro Ай бұрын

An engineers mindset, I thought the same :)

@after_midnight9592 14 күн бұрын

These stools are meant for people sitting behind a table, but balkan gonna balkan.

@wizzywilson 2 ай бұрын

More braces please and add a wider footrpint at the bottom to prevent them toppling over

@jansz7487 3 жыл бұрын

Now, homemade coffin for mechanic.

@westfieldracer Ай бұрын

That works a treat, my school canteens gonna be missing its benches

@85201Jz 2 ай бұрын

Step 1: drive car on ramp. Step 2: Change underpants. 3.: Fix car. 4.: Get a friend to back the car off while you direct / pray. 5.: Say bye to friend. 😂

@gurjindersingh199 3 жыл бұрын

Nice clutch control

@ivicapoje7024 3 жыл бұрын

Thank you

@barryblack7384 4 ай бұрын

Well that's not sketchy

@romariojunger4054 3 жыл бұрын

Espetacular, ensina como fazer

@icraftcrafts8685 3 жыл бұрын

please add extra cross plates at the bottom of the ramps as they look very narrow amd might be unstable in heavy wind or a bump

@ivicapoje7024 3 жыл бұрын

👍

@billybull7419 8 ай бұрын

Wind? It's a car

@Delibro Ай бұрын

@@billybull7419 😀😀

@joeyhustles961 2 ай бұрын

kinda genius , I wanna see him back it off.

@user-gl6gl2uj7t 3 жыл бұрын

Довольно таки опасная штука.

@SamVieiraGuitar 2 жыл бұрын

They only thing about those ramps is that they are too low to work on the car if standing and to high to work on it if you are under the car.

@dongordon4464 2 ай бұрын

I just now saw this May 6 2024 - the more I look at it the less I would trust it. Material needs to be three times that size and more bracing.

@gerhardp.9194 2 ай бұрын

Tolle sache super Gebaut !👍👍👌👌

@lotuslotus718 3 жыл бұрын

Excellent. Job.

@ofp8574 Ай бұрын

It is interesting to see this sort of ramp in action, with the way it sorta pivots in the middle. There is a used car lot near me with some, and I had never seen them in use before, always wondering how harsh and how forceful on the front legs they were. I was thinking of making a set myself. The main difference with how I would make them, would be to make them a bit wider, and join them at the ends with some pipe, possibly using a pin system to adjust the width. I would probably just make the platforms wide enough to accomedate a variety of track widths and make the spacing of the ramps fixed.

@SuperZardo Ай бұрын

gigantic mouse trap, only the cheese is missing

@ExiledWolf84 Ай бұрын

Tisk-it-a-tasket, the mechanic's in the casket.

@damonhuuliken3789 Ай бұрын

То, чего все ждали так и не произошло

@zanecarpenter6956 11 ай бұрын

I fw it for smaller euro cars

@BadThrusher Ай бұрын

Even the most hardcore DIYers will chicken out when they see this 😅

@westfieldracer Ай бұрын

Wasn't that well made, I'm sure some DIYers could build it also

@robdobson5419 Ай бұрын

Still better than Harbor Freight jack stands.

@khancross 3 ай бұрын

These are awesome

@louscannonmagoo9989 2 ай бұрын

This was part one of two. Part two unfortunately didnt happen when the owner suddenly had to bench press a VW Golf!

@rjuarez4913 4 жыл бұрын

These need what I borrow from car lot elevated car ramp designs, is a front and rear interconnecting bar to stabilize movement between the two sides and hold the width alignment. Some ramps of this separate design have fallen on their owners. Very important design flaw for all you diyers. Be safe!

@bestamerica 2 ай бұрын

' that coool good homemade car ramp... car is a lite weight

@clevername4781 3 жыл бұрын

Nice. I'd use the hell out of them

@kasiakowalska500 2 ай бұрын

Nice and deathly

@krunobozic 2 жыл бұрын

Svaka Cast !!!

@logohigh1 Ай бұрын

awesome 👍

@AaronStarkLinux Ай бұрын

I would attach them together with soldered bars across for safety.

@mortenfrosthansen84 24 күн бұрын

It is the belief in the idea, that is keeping those two from not tipping over.. But OK, the video doesn't them getting out of the car

@andrebartels1690 2 ай бұрын

The principle is really cool. They look a bit weak, but i didn't do the math. But a bit of cinderblock under each end for extra safety wouldn't harm, i guess.

@Tonyx.yt. 24 күн бұрын

every time the ramp is used, a new clutch its needed 🤣

@marekmarga2000 5 жыл бұрын

very good, reasonable, stable, strong and relatively lightweeight design. Perfect! The best one I have ever seen. I would recommend to everyone who is looking for the right design.

@ivicapoje7024 5 жыл бұрын

Thank you

@FernandoOliveira-tz9rl Жыл бұрын

Zvzcqero saber o preso de um

@twjohnson1203 Ай бұрын

How cute, a teeter-totter for his car. Now isn’t that special!

@alexsavastru8125 11 ай бұрын

Funny idea but if you were to "rotate" the entry triangle upside down, you would avoid doing that whole gymnastics routine when getting up the ramp and still have the exact same height.

@AlvaroX2 7 ай бұрын

Melhor comentário é o seu.

@davidreynolds3082 2 ай бұрын

They'd need to be much longer then!

@JTV84 2 ай бұрын

but that would be less fun. ramps aren't really much good for anything more than an oil change anyway, and i wouldn't even want to be swinging off a tight sump nut or oil filter under this.

@andrebartels1690 2 ай бұрын

I guess no. You would scratch the underbelly of your car in the transition from the ramp to the platform.

@oldb-1kenobi 2 ай бұрын

It's been 5 years. How about a follow-up video on how it's held up?

@jongoin4404 2 ай бұрын

Unfortunately, he is no longer around, like here on earth, so that “follow-up” video that you speak of is literally impossible, at best!!! 😂😂😂

@westfieldracer Ай бұрын

Sounds like it didn't hold up then 🤕 ⚰️

@davidandrews5510 Ай бұрын

I had a flatmate who built his own car ramp

@TBonerton Ай бұрын

I looked at a house a while ago and they had a "lift" in the garage. It was made of 2x4s...

@kowalski363 3 жыл бұрын

Nice

@johndixiewayne5969 4 жыл бұрын

He is not afraid of it 👍

@jansz7487 3 жыл бұрын

He prays under car.

@mustijack 2 ай бұрын

Cool

@austinr8501 Ай бұрын

Hopefully it was put up there to change the clutch

@johnr5545 Ай бұрын

Nice god bless

@highdownmartin Ай бұрын

If your engine mounts are shot it’ll fall off when you restart. That’s if it didn’t fall over when you turned it off.

@rustedjunkgarage3316 2 ай бұрын

Oh boy, how sketchy is that. 🤷🏻‍♂️🤔

@joetroutt7425 Ай бұрын

I could this going sideways really fast.

@mijat1488 3 жыл бұрын

Delniceee

@blueonblueracingnova 2 ай бұрын

No more use than the car been on the floor. What could you possibly change ? The exhaust or underseal the car? . still can't work behind the wheels or running gear ect

@skipdog77 Ай бұрын

Seems legit. 😂

@danielcosta5091 3 жыл бұрын

Dar para montar um lava jato em sua casa com uma rampa dessa.

@carpballet Ай бұрын

Who engineered these?

@lukasgarage956 3 жыл бұрын

People are awesome

@ivicapoje7024 3 жыл бұрын

You got that right 👍

@JamesSmith-ix5jd Ай бұрын

At least it wasn't made out of 20mm cheap aluminum extrusions.

@davidbreitwieser3591 2 ай бұрын

The ideas there, but he built it like a 3rd graders bridge project, try again with proper steel, maybe tube or angle; 5/16 thick steel angle or t bar might be more suitable

@GerdMcGurk Ай бұрын

If I ignore the ramps, all I hear is a 1.6 Liter VW diesel

@antisa9906 3 жыл бұрын

dobro si to obavio🤣🤣🤣🤣

@CurlyFromTheSwirly 2 ай бұрын

That's a great concept... but I'll pass, bro.

@XplorinWithPaul Ай бұрын

If u still cant walk under it or efficiently unt anything atill what is the point its mo beeter than a regular floor jack

@Landshark928 2 ай бұрын

Circus act🎉

@LionsTigersBears 2 ай бұрын

Sticking the landing without breaking the front pegs or falling off.😢😢😮😮

@ArjenJongeling 2 ай бұрын

If the cat leans against the side of this construction, it collapses in a lateral direction.

@ivicapoje7024 2 ай бұрын

Then i have to have two cats. For balance. 🤣

@ArjenJongeling 2 ай бұрын

@@ivicapoje7024 🤣

@MGszamanVlog 2 жыл бұрын

Hi super video ! can I use part of your video to my compilation homemade inventions ?

@ivicapoje7024 2 жыл бұрын

Yes, of course.

@MGszamanVlog 2 жыл бұрын

@@ivicapoje7024 Thank You

@brenybreny997 Күн бұрын

Paráda

@jankopjegica7379 3 жыл бұрын

delnice-croatia

@ivicapoje7024 3 жыл бұрын

Pozdrav delnice. 😁

@zombiezilla Ай бұрын

Wood and skinny metal bits?!? Yeah, ummm, noooooooooo.

@SamusMaximusSMXD Ай бұрын

I would NEVER get under there EVER.

@westfieldracer Ай бұрын

Why, it's only a VW

@Nastynati0513 2 ай бұрын

Imagine the car falling off it and the ramp punctures the oil pan

@henryfitzgerald4965 2 ай бұрын

Or the gas tank!

@dangerdavefreestyle 2 ай бұрын

Could you please specify the height? Its looking like it would still be hard to get under there and i am trying to figure out the perfect height for making one!

@mxfool1508 Ай бұрын

It's high enough that if the ramps give way it will be a quick death

@fekvid6512 2 ай бұрын

good build

@johnstorace1967 2 ай бұрын

Sketchy at best.

@michaelallen5505 Ай бұрын

Did any of y'all ever play the game mousetrap?

@RondeLeeuw Ай бұрын

'Ramp' is Dutch for 'disaster'. Possibly because of this video.

@shivprasadnaik3678 3 жыл бұрын

Good but dangers need improvement 👍👍👍👍

@ivicapoje7024 3 жыл бұрын

I didn't have any problem so far. But it has to be dry when i roll up. That is all But i am alwys for improvement. 👍

@csmith785 2 ай бұрын

It seems a little over-built. You should have made it out of smaller square tubing.

@henryfitzgerald4965 2 ай бұрын

LOL😮

@kingtut5923 4 жыл бұрын

yahoo

@ashchaya7676 2 ай бұрын

Then, suddenly...

@randyscrafts8575 Ай бұрын

YIKE!

@bossman6174 2 ай бұрын

This was 5 years ago. Now it is April 2024. How is it holding up any problems with it. Are you still with us? I hope you put some crosspieces in to keep it from collapsing side ways.

@ivicapoje7024 2 ай бұрын

I'm still using it. No problems. Even put a ford transit on it.

@ivicapoje7024 2 ай бұрын

But for transit i did use crosspieces.

@bossman6174 2 ай бұрын

Good, but for strenght I see only one piece of metal between the two ramps. That seems not enough for the whole thing to be safe. I would put cross pieces on, not just for transport. It would be good if there were cross pieces when you have a car on it. To keep it from collapsing sideways. But you have been using it for 5 years now and no problem. But it only have to go wrong once and then it's lights out. If you know what I mean.