CardBoard Basics Tutorial Guide Chip/Matte Board model making: modeling for Designers & Architects
Рет қаралды 159,886
Күн бұрынCardBoard Basics, a Tutorial guide for Chip Board matte board bristol board and model making for all designers architects model makers hobbyists and crafters.I show how I build some 2" x 2" 50.8mm x50.8mm cardboard cubes using straight cut x-acto blades and white PVA glue.
X-Acto #11 extra durable 100 Pack Blades amzn.to/349F2Fu
Xacto Black Gripster: amzn.to/2JuxOCx
SHINWA Machinist square 150mm: amzn.to/39zZ7GQ
Luer lock bottles with needles: www.ebay.com/itm/224710545884
10 pack Crescent Colored Mat Board, 32 x 40: amzn.to/358rkU0
Chipboard Sheets, 12" x 12", Natural, 25-Pack: amzn.to/2KFH6MQ
My Video Gear:
Panasonic GH5 amzn.to/35ZeQgp
Panasonic GH4 with lens amzn.to/2Nb5B7b
Panasonic Lumix 14-140 lens amzn.to/2FOxYmi
PANASONIC LUMIX G X Vario Power Zoom Lens, 14-42MM Power O.I.S
amzn.to/2J3KsJH
Headphones Sony MDR7506: amzn.to/2ycntIV
Samsung 128Gb MicoSD card with adapter
amzn.to/2CcEFzW
Zhiyun Crane V2 3 Axis Brushless Handheld Gimbal Stabilizer
amzn.to/2NKp2kz
Pergear Tripod Tabletop Stand for the Zhiyun Handheld Gimbal Stabilizer
amzn.to/2NaKWjK
My Audio Gear:
MXL 990, XLR Connector Condenser Microphone: amzn.to/3elRw1K
Shure MVi Digital Audio Interface XLR to USB: amzn.to/2VzjgYa
USB-C to Micro usb cable: amzn.to/3cfcrSb
My Hardware:
Apple 16" MacBook Pro: amzn.to/2VrAI0C
Apple Thunderbolt 3 cable: amzn.to/3clTwVV
G-RAID with Thunderbolt 3 amzn.to/2uQppFx
LG 27UK850-W 27" 4K Monitor: amzn.to/3elxpk7
Apple iPad Pro 12.9-inch: amzn.to/2K5qwp7
Apple pencil 2nd gen: amzn.to/3elyisX
Apple iPad Mini 4: amzn.to/2VrJzPP
Apple USB-C to SD Card Reader: amzn.to/3cgGXeo
ThinkTank Shapeshifter 15" Backpack: amzn.to/2Cc6U1F
Arteza Products goo.gl/v9Lda3
Be sure to use the coupon code OHF-TPE-039 for 10% off on purchases.
Arteza 24x36" Self Healing Rotary Cutting Mat goo.gl/qiXukm
Arteza 18x24" Self Healing Rotary Cutting Mat goo.gl/DjdRkN
Arteza 12x18" Self Healing Rotary Cutting Mat goo.gl/rio17o
The rotary cutter: 45mm: bit.ly/2u8qOnF
Music: end credits Rurlyok
rurlyok.bandcamp.com
Contact me through www.botzen.com for design work,
you can follow me on:
Google plus: plus.google.com/+EricStrebel
Twitter: at / botzendesign (@botzendesign)
Facebook: / botzendesign
Instagram: / botzendesign
Botzen Design Inc.
Industrial Design and Product Visualization
www.botzen.com
@mimasweets Ай бұрын
I remember this video five years later and it finally became relevant! Hell yeah!
@Dolleemixtures 3 жыл бұрын
Thanks for the video but those buzzer noises are way too loud. I want to listen to you but I needed to turn my volume way down for those bits :(
@TheCimbrianBull 5 жыл бұрын
Thanks for the video, Mr. Strebel. But those buzzing sounds at the beginning were really loud! Gave me a jumpscare! LOL! 😂
@jmgajda8071 3 жыл бұрын
And not in a good way!!!
@rk.r2439 2 жыл бұрын
this is literally heaven how am i only seeing this now after my first semester ends
@angelaeuth2462 5 жыл бұрын
I LOVE ALL YOUR VIDEOS, you’re a mentor to me. I appreciate you.
@JohnJones-oy3md 5 жыл бұрын
I love the clear block mold candling in the intro. Clever.
@mattherman6189 2 жыл бұрын
This was a revelation! Thank you. This is a higher level of craft. There is so much to learn from in every frame of this video. Not only the result and general technique, the tools, methods workspace, etc. but the way the hands move, manipulate and position, the fine control of pressure, the efficiency. I noticed that there is a certain lack of tension in the hands and finges, they are precise but for the most part relaxed. In that respect you can see how it resembles playing a guitar or instrument... odd connection but I think still valid. Thanks for showing us how it's done! The vid speaks for itself. Looking forward to trying some of this... It won't be pretty to start, hahah... but with time. Look forward to checking out your channel. Thnks
@EricStrebel 2 жыл бұрын
Probably some truth to that. Thanks for your comment and feedback. Much appreciated.
@garagemonkeysan 5 жыл бұрын
Great video. Love working with cardboard. Thanks for sharing! : )
@JamesAmos 5 жыл бұрын
This was awesome and eye-opening! Thank you
@freakinccdevilleiv380 9 ай бұрын
I love your sub millimiter precision
@franek4196 4 жыл бұрын
Man, Im in artschool and you just save my ass
@angelaeuth2462 5 жыл бұрын
Can’t wait for the next video. YASSSS
@johnkelley9877 4 жыл бұрын
This was very helpful! Thanks for sharing this, I learned a lot from it.
@EricStrebel 4 жыл бұрын
Great Glad you liked it, feel free to share with the world on social media.
@theoriginalmakaaka101 4 жыл бұрын
You are really good at commenting on the videos. Very entertaining and understand how to use music but prioritize the voice so it's easy to understand.
@danielacampins 4 жыл бұрын
This is very well done!
@stephenstrebel8165 5 жыл бұрын
Nice and easy and usable tips. Thanks
@kurogiza 5 жыл бұрын
Some very good tips in here, thank you!
@EricStrebel 5 жыл бұрын
Thanks I appreciate your comment.
@rasmus9311 4 жыл бұрын
Those buzz sounds really woke me up
@jasoncostello5021 3 жыл бұрын
What makes you choose matte board over foam core for a project? When is it suitable to use each method?
@nameme2745 7 ай бұрын
Thank you for giving a lead to a novice like me!
@JoJo-xb7do 2 жыл бұрын
hello thanks for this video, it has helped a lot. What would you recommend for quick context models?
@SianaGearz 5 жыл бұрын
Something makes me think such cardboard would also form a perfect basis for a composite material that would stand up to end-use requirements, if it was allowed to soak and cure with a suitable resin. Just that I haven't tried and thus don't know a suitable resin. Also it can get mighty messy. Using sheet styrene can of course be an alternative, and it can be welded together. But it's not nearly as flexible to work with as cardboard.
@deepanshuverma1010 5 жыл бұрын
what is the material from which you hold the scale
@sarasalaparuta6891 4 жыл бұрын
Where can I order some 2mm white woodpulp? I've been looking everywhere for it.
@mrj.o4556 5 жыл бұрын
How do you get the luer lock glue dispenser in the uk
@yungchrissy8427 3 жыл бұрын
Yo my teacher is using this video for Design Technology thanks for making this channel keep it up.
@EricStrebel 3 жыл бұрын
Sweet, what school?
@yungchrissy8427 3 жыл бұрын
@@EricStrebel The John Fisher School in the UK
@EricStrebel 3 жыл бұрын
Thanks for the reply, Best of luck with your studies! Rock on!
@Love2Banime 6 ай бұрын
I have thought of model making, but wasn't sure whether to start with cardboard or foam board. I see that cardboard would be better for a beginner like me.
@EricStrebel 6 ай бұрын
Take your time, practice makes perfect. Good luck with your project
@alsmithangeleena1569 4 жыл бұрын
I usually save up cardboard boxes so I can use them later for model making but I do not always get clean cuts. It sort of depends on the cardboard I’m using, is there a way to tell if the cardboard is good enough to give me clean edges??
@EricStrebel 4 жыл бұрын
The key to clean edges is a sharp blade it doesn't really have anything to do with the media that you're using unless it's just way too hard to cut but there should not be an issue with cardboard.
@nathantj2915 5 жыл бұрын
Hi, what brand of chipboard are you using?
@barreracruzangeldaniel8208 10 ай бұрын
Exelente videooooo
@EricStrebel 10 ай бұрын
Thanks, I'm glad you liked it.
@livekhone375 Жыл бұрын
very good very useful love u
@JamesAmos 5 жыл бұрын
Where did you get those cool weights and the cool heavy-aluminum straight-edge? It looks like the extra weight of the straight-edge make cutting lots of things easier?
@EricStrebel 5 жыл бұрын
James AmosThey are from a glass blowing project, just left overs, just work well for squares and block weights.
@EricStrebel 4 жыл бұрын
SHINWA Machinist square 150mm: amzn.to/39zZ7GQ
@babagan 3 жыл бұрын
Ok so, for an art project i need to do a half human sized fence/gate and i thought that i could do it with papier mâché but i dont have enough time. I also though about cardboard but i'm not sure. I only have a week to do it so can someone give me advide please
@loulacman 3 жыл бұрын
Great video, Eric! What is name for those weighs you use to weight and square up the boxes? Also, can you recommend where to find them?
@EricStrebel 3 жыл бұрын
They are press forms for a glass blowing project, totally custom
@loulacman 3 жыл бұрын
@@EricStrebel ok, thank you
@evilerroryt8448 4 жыл бұрын
It's my 1st time working with 3d models and it's gonna be my final piece for my mock exam pray that my building doesn't look like chewed up dog food 😂
@fedirkryvyi 5 жыл бұрын
I dunno, it feels as if a folding pattern is structurally better. Or is there some issue with trying to bend a cardboard?
@SianaGearz 5 жыл бұрын
Well you are going to have 3 rounded edges and then a sharp edge. This might not be the consistency you're going for
@davidmisconishart2733 4 жыл бұрын
Eric, Please share the source of the small square you use in this process... I've been looking for something EXACTLY like that. Thanks!
@EricStrebel 4 жыл бұрын
Made by Shinwa, bought it on eBay, excellent tool.
@EricStrebel 4 жыл бұрын
SHINWA Machinist square 150mm: amzn.to/39zZ7GQ
@nokiot9 4 жыл бұрын
You have any tricks for beveling the edges at a 45?
@EricStrebel 4 жыл бұрын
Practice
@sherrysunshine6986 Жыл бұрын
What is the best and cheapest material to use for shaping molds in your opinion? I am sure it varies for each type of material but I am trying to find ways to help recycle things. You seem very smart so thought I would ask.
@EricStrebel Жыл бұрын
Silicone is the best
@sherrysunshine6986 Жыл бұрын
@@EricStrebel Thank you !
@RobertLeeTeacher 5 жыл бұрын
Do those Luer Lock bottles work with CA Glue?
@EricStrebel 5 жыл бұрын
Sorta, they will clog eventually, just clean it well after each use.
@fatmafaizal07 4 жыл бұрын
Where can i get the net of an interlockabke cube?
@EricStrebel 4 жыл бұрын
Basic math I believe
@rickeemahoney1787 2 жыл бұрын
Hello, are you still able to sell the luer lock nozzles with cap even though it is off ebay? I cannot find this type anywhere.
@EricStrebel 2 жыл бұрын
I have updated the link for you. Thanks for letting me know it was not working
@meghangerety6827 2 жыл бұрын
Just thought you should know that your ebay store link for the luer lock bottles is broken
@killdeer 4 жыл бұрын
I can't seem to find a nice small metal square like you have. Everything I find is either flat (without the small overhang) or stupidly big or stupidly expensive.
@EricStrebel 4 жыл бұрын
SHINWA Machinist square 150mm: amzn.to/39zZ7GQ
@johnflores6181 3 жыл бұрын
I’m a first year architecture student and could really use the luer lock bottle with the needle 🙏. You ran out on eBay
@aleksandrazelazek7673 4 жыл бұрын
Hi, what is the thickness of that card?
@EricStrebel 4 жыл бұрын
I have no idea, not very thick prob about 1mm
@luellanoles8585 2 жыл бұрын
Where do you find the weights you're using?
@EricStrebel 2 жыл бұрын
Custom machined, left over from a glass blowing prototype we made many years ago
@luellanoles8585 2 жыл бұрын
@@EricStrebel any suggestions for acquiring similar weights? ;)
@EricStrebel 2 жыл бұрын
They were milled from just regular mild steel blocks I suppose you could have something machined from a local machinist
@samr.b.929 3 жыл бұрын
Hey, I have a question is this tectonic cubes?
@EricStrebel 3 жыл бұрын
Not sure what a tectonic cube is, please elaborate
@samr.b.929 3 жыл бұрын
@@EricStrebel we are doing a project for my Architectural Designing class that one has to be stereotomic vs tectonic. So tectonic is looking like a cube that you have to see the volume inside like how you did with your chipboard cube, while stereotomic cubes are working fr inside out
@EricStrebel 3 жыл бұрын
@@samr.b.929 great, best of luck with your additive and subtractive volumes.
@nokiot9 4 жыл бұрын
Holy cow you sound a lot younger than you look too. Lol idk if that’s a backhanded compliment sorry ♥️
@EricStrebel 4 жыл бұрын
😄
@lonepiggy7709 4 жыл бұрын
Pls tell the name of this cardboard.
@EricStrebel 4 жыл бұрын
chip board...
@IronMan-yg4qw 3 жыл бұрын
u need buy a neje 30 watt laser cutter to cut out this stuff! not to expensive. well these shapes are simple but for other more complicated stuff. maybe interlocking pieces.
@EricStrebel 3 жыл бұрын
I have videos about that
@IronMan-yg4qw 3 жыл бұрын
@@EricStrebel doh!
@IronMan-yg4qw 3 жыл бұрын
@@EricStrebel hey! i wana make some 8 in x 10 in x 6 in bin/trays for vitamin bottles for the cuboard.,and i want to make it out of cardboard, but i need it durable to handle repeated daily use. what do you suggest i do? maybe reinforce it somehow? an with a nice looking finish on the outside.
@theuselessteammate2097 4 жыл бұрын
What cardboard do you use
@theuselessteammate2097 4 жыл бұрын
Just because my cardboard had this half empty middle with the crosses but I need solid cardboard
@EricStrebel 4 жыл бұрын
Get a chip board, very inexpensive, works well
@Norfolk250 3 жыл бұрын
I am SOLD on that glue bo’ol !! (and I use double-sided tape, even!!!!)
@markkoons7488 3 жыл бұрын
Damn buzzing makes me want to kick someone in the shins. Guess who. That's too bad, Eric, because I learn a lot from your videos and really (otherwise) enjoy them.
@EricStrebel 3 жыл бұрын
Watch my latest video, you will want to kick everyones shins 🙂
@benjaminmedina3360 3 жыл бұрын
quien acá por desafíos?😅
@ChrisGurin Жыл бұрын
Painter's tape is a sign that God loves us. The other one is, of course, bacon.
@lilotaku2236 5 жыл бұрын
No I broke the scissors into two to cut cardboard
@krltslnd4186 2 жыл бұрын
I always start with an Amazon box and glue gun 😅
@andrewshatnyy Жыл бұрын
Wow. Easy on the sounds. It's just disturbing!
@GeorgeGraves 5 жыл бұрын
My poor speakers.
@TheCimbrianBull 5 жыл бұрын
I feel your pain, dude! I was listening to this with ear buds.
@legendarywarthog 4 жыл бұрын
... I do like me my hot glue messes lol
@legendarywarthog 4 жыл бұрын
I came over for Ideas on making a cardboard deck box. With a functioning lid but got some better insight on how to build the structure better.
@LeRoasts_Chip Жыл бұрын
My channel is a lie now
@kevineleven5610 3 жыл бұрын
Do you think it's okay to intro with an annoying buzzer. NNNÑNN. NNNÑNN NNNÑNN NNNÑNN NNNÑNN
@EricStrebel 3 жыл бұрын
Yes
@garyp3472 2 жыл бұрын
@@EricStrebel i think buzzer was great choice. I wont be back but only cause people sleep in this house, but if i get rid of family one day, this will be my first stop.
@EricStrebel 2 жыл бұрын
Yes, I do
@wantonialyons2711 Жыл бұрын
Video really ain't got me, man's just show me up without warning 😭😭😭😭😭
Eric Strebel
Рет қаралды 112 М.
Eric Strebel
Рет қаралды 65 М.
All process of world
Рет қаралды 276 М.
FoamCore Advanced Basics Tutorial Guide FoamBoard model making: modeling tips & tricks for Designers
Eric Strebel
Рет қаралды 537 М.
Unraveling Architecture
Рет қаралды 71 М.