Cardo Helmet Adapter for Shoei helmets

No video

Cardo Helmet Adapter for Shoei helmets

Рет қаралды 16,130

Күн бұрын

Cardo do some of the best intercoms and devices on the market in our opinion, and now they have made a specific adapter so you can fit it to your Shoei helmets so easily! You can also grab yourself a huge discount by using "RidercamTV" at check out on Cardo's website!
Click here to get yours
bit.ly/3txeCid from Cardo or
bit.ly/48smdgK from SportsBikeShop
--------- Buy us a Coffee ☕️ ---------
www.buymeacoff...
--------- Support Us ❤️ ---------
Need something from SportsBikeShop - bit.ly/3Yxuso6
--------- Our Social Media & Website info ---------
/ ridercamtv
/ ridercamtv
/ ridercamtv
www.ridercamtv.com
--------- Merch Store ---------
www.ridercamtv...
--------- Kit we wear & Equipment we use ---------
www.ridercamtv...
--------- Free stuff and discounts! ---------
Grab a discount on a Cardo Communication System!
cardosystems.r...
Or use discount code RiderCamTV at checkout!
Insta360 One RS - Get a free accessory when you order!
www.insta360.c...
Insta360 X3 - Get a free accessory when you order!
www.insta360.c...
Insta360 Go 2 - Get a free accessory when you order!
www.insta360.c...
Insta360 Accessories
store.insta360...
--------- Our Partners ---------
Cardo Systems
Grab a discount using link here cardosystems.r...
Or use Code RiderCamTV
Monimoto
www.monimoto.c...
Magellan Motorcycle Tours
www.magellanmo...
Innovv
innovv.co.uk/r...
Techalogic
techalogic.co....
DrySparkle
www.drysparkle...
Grab yourself 10% off at checkout with code "RCTV10"
* Our Affiliate links don't cost you anything but we do receive a small amount from the vendors which goes to help us make more content. 😁

Пікірлер: 62

@pilkjaer 4 ай бұрын

Interesting design. It's sad that you need to have their latest intercom devices in order to use it. I would like to se something similar for older models as well. The intercom now sticks out much more. It spoils the way helmet looks like and I wonder if it will generate more drag and noise. But I like to have an integrated solution. I hope soon Shoei will offer proper Cardo integration in their helmets they do with Sena.

@kevinbarton4012 3 ай бұрын

I just used my Shoei Neotec 2 with the Sena SRL installed. My wife called me, the speaker sound was so distorted that I had to have her repeat what she said. I am going to get another Cardo. I had the bold on my old helmet. It's much better sound and better on voice commands.

@RiderCamTV 3 ай бұрын

We find cardo great too. Don’t forget there is a discount at cardosystems.com with code ridercamtv :)

@ItsWhatiLike 7 ай бұрын

KZfaqr in UK had a video where he obtained CAD drawing for clip, had local shop 3D print it. I did the same here in the US and worked.

@RiderCamTV 7 ай бұрын

cool

@hartley383 7 ай бұрын

Shame Cardo havent made an adaptor for the Bold. Theres a vid on KZfaq on getting a 3D printed adaptors for the Bold and Edge that fits into the location. Ive just ordered one for my Bold to fit to my Neotec2

@moocw91 7 ай бұрын

May I have the purchase link ?

@aidencoder 3 ай бұрын

I might 3D print an adapter for my Shoei GT-Air 3, because I don't think Sena is going to be the way forward.

@jellybean8421 Ай бұрын

Hey dude, did you ever end up printing a piece?

@RideHarder 3 ай бұрын

Hello, how about Cardo edge on the new neotec 3? I’m loooking to buy an new helmet but also new to the intercome world and I saw that one of the best it’s Cardo edge… but looks like the new Neotec 3 comes ready for Sena…

@mojo4376 5 ай бұрын

That thing really sticks out.

@Bob-ts2tu 3 ай бұрын

agree, i don't like it for that reason

@DONALD-MAGA 14 күн бұрын

where do you put yours so that it doesn't stick out?

@stonecold2653 7 ай бұрын

it would be great if you guys could do a cardo post on how to adjust the tone and bass of the cardo.mine seems to be way to tony and drives me and my friend mad.

@RiderCamTV 7 ай бұрын

hey buddy. we will see what we can do on that :)

@stuipooey1 7 ай бұрын

Looks good however a real pity it doesnt clip in mechanically instead of sticky pad.

@ItsWhatiLike 7 ай бұрын

I saw another KZfaq video where someone in UK found a CAD drawing for a clip and then had a local 3D print shop print it. I did the same in the US and problem solved. Clips into my Shoei Neotec II instead of the adhesive option

@newroads9787 7 ай бұрын

Great idea.its very low down near your shoulder.when you put the helmet down does it sit on the unit? I think there is an aftermarket version that is 3d printed.

@RiderCamTV 7 ай бұрын

Not had any issues so far

@simonwardlesw 7 ай бұрын

It's a shame they don't do one for the Packtalk Bold!

@RiderCamTV 7 ай бұрын

yeah although they may bring them out in the future perhaps?

@GSHants 7 ай бұрын

Might be controversial but Have to say I’ve got a GT Air2 with the Sena system and really couldn’t be happier, looks neat, great sound and good communication, was really unsure beforehand as wanted a Cardo unit…was changing my old interphone sport which was crap, 20 squids seems and awful lot of dosh for a piece of plastic?

@RiderCamTV 7 ай бұрын

it is a little pricy i guess, but made to fit to the helmet and for some, it means a lot less hassle then trying to do a 3d one. :)

@windinthewillows6248 3 ай бұрын

Having had both Sena and now Cardo, have to say Sena are not even close to Cardo, for sound, quality and userbillity. Nolonger have my Shoei Neotec II, but if I did, I’d be junking Sena for Cardo. Cardo need to now start looking at slimming the device down, and making it look more integrated to he helmet. If I can give Sena any credit, they do a good job of integration, but the electronics, user interface and even the product actually doing what it says on the box, they fall short every time.

@RichO1701e 7 ай бұрын

Just need Cardo to do an adapter for Schuberth helmets now or do some kind of partnership with them bcos Schuberth have the BEST solution of helmet comms, INSIDE the helmet and not stuck outside

@RiderCamTV 7 ай бұрын

with you on that one.. would be fab for them to do internal adapters so that everything is inside

@johnbateman327 7 ай бұрын

I've got one it fell off I had to re stick it with sugru. I was very disappointed 🙄

@chrisbrowning3286 2 ай бұрын

Same.

@AKPehlivan 2 ай бұрын

Kaliteli hissettiriyor mu? Çok çıkıntılı durdu

@horatio8764 6 ай бұрын

Oh and sorry great channel by the way

@horatio8764 6 ай бұрын

Shoei neotec 2 , great helmet Sena intercom crap. Mine died and 24 hrs later my wife's unit died after being in a good old Ozzie storm , the side switch unit filled with water. Not happy, Sena don't care no parts available, but I have found an electronics guy that repaired both and they work better than originally. Sena just wanted new units sold at $599 AUD each, repair bill $120

@douglaskirk3036 4 ай бұрын

wow, thank god for fast forward. damn thing is about foot off the helmet. Ill stick to the sticky and the Bold.

@mikedignum1868 7 ай бұрын

Do they have an adaptor for the Cardo Bold version?

@RiderCamTV 7 ай бұрын

not yet i dont think

@eksimariano1841 4 ай бұрын

I think shoei patented the plastic clip cover, that is why cardo resorted to a stick on adapter.

@RiderCamTV 4 ай бұрын

That could explain it

@chrisbrowning3286 2 ай бұрын

Did everything meticulously and sticky tape failed in a few days on cross country ride.

@faraway5828 7 ай бұрын

This is the UK Tuber who documented the3D solution. So much better than making a modification that will be horribly difficult and messy to remove. Shoei / Sena licensing was the reason they wouldn't let Cardo do a properly engineered solution kzfaq.info/get/bejne/hMyYpaxnssubn2w.html

@RiderCamTV 7 ай бұрын

awesome, thanks buddy

@hartley383 7 ай бұрын

I recently ordered one for the Bold after seeing this. Fingers crossed.

@swill369 7 ай бұрын

Followed the instructions in the video and ordered one last year. Really pleased with it. Solid and fits the Edge perfectly.

@dungbeetle. 7 ай бұрын

Thanks for the video, guys. I was wondering though, can you still get to the sun visor slider easily enough with the helmet on and wearing gloves?

@markholroyd5365 7 ай бұрын

Yep no problem.

@stevenharris7788 7 ай бұрын

Do you do tours to Norway

@RiderCamTV 7 ай бұрын

Hey. Yes head over to magellanmotorcycletoura.co.uk

@markholroyd5365 7 ай бұрын

Magellan have two tours to Norway this year. I will be guiding the first which starts on 3/8/2024. We leave from Harwich by ferry over to the Netherlands then up through Germany, Denmark, Norway to the Arctic Circle north of Mo I Rana then in to Sweden and back down through to Gothenburg another ferry to Denmark, Germany, Netherlands and ferry home. It’s an awesome trip and if you mention RiderCamTV there may be a discount. Come on it’s a trip you will love.

@dimitrisloxias5265 7 ай бұрын

You can 3d print a far better adapter that ths pos that cardo sells for 20 pounds.

@milabaigar 7 ай бұрын

I think that’s ilegal here (Spain) because it interferes with the integrity of the helmet , I have my communicator stuck on with Velcro and it’s never fallen off , just saying 🤷🏼‍♂️also new law here open face type helmets are ilegal . 🤦‍♂️

@RiderCamTV 7 ай бұрын

thanks for the info. Although i have never had an issue with the cardo on the side of the helmet when speaking to local or national police

@johnanderson2406 7 ай бұрын

I use the standard clip that comes with the Cardo device ON MY Neotech II... no issues.🤔

@donpetryna4356 7 ай бұрын

Was it the mechanical mount or the stick on mount? Will the mechanical mount fit between the shell and liner?

@johnanderson2406 7 ай бұрын

Hi, its the mechanical slip/push on clip.

@donpetryna4356 7 ай бұрын

@@johnanderson2406 okay thank you. I am coming out of the RF1200 and looking at the modular neotech 3 to replace it. I am thinking the neotech 2 and 3 are very similar in regards to that area.

@hartley383 7 ай бұрын

The Neotec 2 and 3 have different coms arrangement. Sena coms fior a 2 will not fit the 3

@diegosantos9752 7 ай бұрын

Sticks out like the proverbial dogs....