Need to Recalibrate Your Stihl M-Tronic System? Here's How To Do It!

Рет қаралды 35,044

Жыл бұрын

#CarlsMowerAndSaw #stihl #stihlmtronic #stihlchainsaw
The Stihl M-Tronic system does an excellent job of keeping your piece of Stihl equipment at the optimal level of performance by controlling the ignition timing and fuel dosage whether you're starting up your chainsaw, hard at work, or even restarting it.
If you need to recalibrate the system on any pieces of your equipment that has the M-Tronic 2.1 system (or anything higher), you'll want to give this a watch!
Not sure what version you have? Just check the silver sticker (usually found near the handle).
------------------
◼️ SUBSCRIBE to Carl's Mower & Saw 👉 tinyurl.com/rz9ydtvj
After many years in the industry, Carl Levien decided it was time to go out on his own. The day came, April 1, 1990, when Carl and Beth Levien officially opened Carl’s Mower & Saw. With a clear goal to provide a higher level of service to Whatcom County, they opened their doors and started building a loyal following of customers. They discovered customers were refreshed by the quality of service available to them. Over the past 30 years we have continued to refine our services and provide the top equipment in the industry.
📞 360-384-0799 / 📧 info@carlsmower.com
Have questions? Drop a comment!
------------------
For more handy tips, follow our socials...
◼️ INSTAGRAM: tinyurl.com/mhjcr8md
◼️ FACEBOOK: tinyurl.com/unaenncp
------------------
◼️ WANT MORE TIPS? SEE OUR BLOG: tinyurl.com/9abjks9r

Пікірлер: 48

@Redhackle Жыл бұрын

Very good . Nice and clear. Thank you.

@st7650 Жыл бұрын

Wow love Stihl pro saws built to last nice knowing how to reset it thank you so much love your videos

@ronwc64 Жыл бұрын

Good to meet you Carl. I am waiting on an ms261 as a first time owner of a stihl and I appreciate any info on tips and maintenance I can get

@johnsweeney1712 Жыл бұрын

Great video, good to see and hear the calibration process. Thank you.

@mikebadilla6970 8 ай бұрын

Thank you

@barrybrum 5 ай бұрын

Hey Josh, your videos are very helpful, thanks for creating and posting them here. I have a question... how often should I mix new gasoline and oil for my M-Tronic Stihl? I mix about a gallon at a time, but often don't use all of it in one cutting. I store the premixed fuel in a sealed container in the garage where the temperature remains fairly constant year round. Is it okay to use premixed fuel that is a few months old? It will run the saw, but is it doing any harm to the engine? Thanks for your help.

@jasongutierrez8642 2 ай бұрын

My stihl ms 441c has the m tronics carb. It won’t start after replacing the ignition coil and spark plug. Not sure what to do honestly

@harryerhart5978 Жыл бұрын

Nice video l never knew that 👍👍

@rickdavid1795 8 ай бұрын

Good stuff Thank you

@carlsmowerandsaw 6 ай бұрын

Glad to help.

@fxnytroxtxFPP Жыл бұрын

My is 2019 ms261c and it does not specify the version of mtronics, which procedure should i do?

@carlsmowerandsaw 6 ай бұрын

There is an indication on the sticker on the rear handle.

@russbedenbaugh4558 5 ай бұрын

Do you do this process every time you use the saw when it is cold?

@videocardzrule354 17 күн бұрын

I’m buying a Stihl 261 (20”) from my local shop. They have both in-stock and brand new. Should I get M-Tronic? Or non M-Tronic? My first saw ever, I bought a piece of land a saw. Unsure which one. 😢

@gclaper1234 3 ай бұрын

I have a 2017 stihl ms 362cm. Do you know which version of m tronic it would have??

@cMurder2osix 2 ай бұрын

No, probably v.2.1. Just try all three methods.

@benjaminleslie3155 Жыл бұрын

Is stihl going to make the ms400 with a full wrap? I understand you can order the part that fit's the saw but I just wonder why they don't make a full wrap version right off the shelf

@carlsmowerandsaw Жыл бұрын

At some point yes. Just not a high priority at this time. Not sure why

@Mr_Clean 5 ай бұрын

362 wrap handle fits. Pricey though

@rottiejakeluke Жыл бұрын

Once you recalibrate, when do you need to do it again? Say I calibrated it and then cut some wood, but put the saw❤ up for a month before needing to use it again. What do I need to do when pitching it to use after the moth has passed?

@davepayton3442 Жыл бұрын

This should only be required on rare occasions. If you replace diaphragms, clean your carb, such as that, you will possibly want to reset. Most of the time reset is not needed on your saw.

@rottiejakeluke Жыл бұрын

@@davepayton3442 thank you. I was thinking this would have been the case, but needed feedback since I am no expert, juts wanting to do the right thing.

@tuberocker69 6 күн бұрын

Changes in elevation and temperature would also apply

@kwspreu 8 ай бұрын

Would a new saw need to be recalibrated 8:21 from the factory or is it good to go?

@carlsmowerandsaw 6 ай бұрын

No you should not need to recalibrate a new saw

@cMurder2osix 2 ай бұрын

Good, it's brand new l. 😂

@youtubeuserUCVuhjgRB1 5 ай бұрын

wife loves when i do this in the garage

@CowboyAxe Жыл бұрын

If you need to tune a new saw can you use that method?. It goes against what they advice.

@carlsmowerandsaw Жыл бұрын

You should not need to tune a new saw

@CowboyAxe Жыл бұрын

@@carlsmowerandsaw Thank you/

@mariomannelli9887 4 ай бұрын

Sound effects are on point 😂

@kalebbrown93 9 ай бұрын

Wait did you run it at idle and WOT with the chain spinning?

@warrior4-u 7 ай бұрын

Yes, take brake off before WOT.

@paulmccallum4229 6 ай бұрын

he took the brake off about 20 sec into the idle portion

@carlsmowerandsaw 6 ай бұрын

No the brake was only on during start and idle. Sorry if you missed that.

@cMurder2osix 2 ай бұрын

Of course, unless you want to melt your case. 😂

@bradgold7138 10 ай бұрын

Chaps shaps ?

@cliffcorbitt9494 6 ай бұрын

I tried all this but as soon as you let it idle for 45 seconds then give it Full Throttle it only runs for one and a half second later

@carlsmowerandsaw 6 ай бұрын

Sounds like you may have a little deeper problem.

@adrianm8852 5 ай бұрын

Are you supposed to do this when the saw is brand new?

@cMurder2osix 2 ай бұрын

No, why would you? It's reset because it has never been started.

@bashdenny1768 3 ай бұрын

Nmb2

@mariomannelli9887 4 ай бұрын

Ms201tc

@austingriffith1118 11 ай бұрын

I would never do this to my clutch. Just take the brake off.

@paulmccallum4229 6 ай бұрын

he took the brake off at 20 sec into idle portion

@cMurder2osix 2 ай бұрын

If your a women leave it on.

@user-jw3wh9sb5e Жыл бұрын

Stihl ruined good saws with this mtronic garbage.

@cMurder2osix 2 ай бұрын

Got a hater here. I have two, best technology out there. 😂