⚡[DIY] The ultimate router table full build (Part 2.) / With Extended Guide Fence System /Workbench+

Рет қаралды 118,270

Жыл бұрын

This video is part 2, and if you haven't seen part 1 yet, I recommend that you watch part 1 first.
I made a very nice and functional router table this time. This project was conceived for a long time, and a lot of effort was put into making a complete work. As much as I put in the effort, I am very satisfied with the results.
This router table is a standalone device, but it can also be used in conjunction with my table saw workbench. Then, it acts as an auxiliary side table of the table saw, and by connecting to the fence system of the table saw, the router table fence can be expanded widely.
The material used as a base is 18mm birch plywood.
10mm white acrylic
African rosewood on a stop block
Enjoy more videos on my channel.
Please support me by subscribing and liking!
I am CarpenTAK from Korea.
Please support the channel by becoming a paid member. Your support helps us create more exclusive content and improve video quality. Thank you for your support!
/ @carpentak

Пікірлер: 57

@mullinstech Жыл бұрын

AS ALWAYS, more outstanding creativity! Crazy thought, maybe fill the kerf cuts on the curved portion of the shield with an epoxy or even a sawdust/glue mixture to match the darker wood, just for the hell of it, but that contrast and attention to that one detail might look pretty cool. Either way, the time you take imagining, creating, editing and providing this content for us to enjoy is very much appreciated.

@carpentak Жыл бұрын

Thanks for the wonderful comment. Good ideas are good too. I always enjoy working because there are people who like my videos. thank you

@josealbertobejaranoulloa2280 Ай бұрын

What a beautiful work! Well done!

@EvolutionWoodStudioz Ай бұрын

Awesome. Just awesome! Thanks

@saschahaas4349 8 ай бұрын

Every video of you is a jewel of woodworking art. Thank you....

@milosgrujic9118 6 ай бұрын

This goes into perversion section of woodworking! Dang it! 😮😮

@steveferguson1232 Жыл бұрын

Love the fence and how it was integrated into the table saw fence for precise movememt

@stephandelange1776 10 ай бұрын

At first, I was a little confused about WHY you made it in two parts. But when I saw why. I thought it was a great idea to make sure your router table is really part and well secured to your work space. Second, I wanted to criticise you on the fact that you set such a well-set router table with such a rough top. Not using a nice slippery laminated top. But after seeing the end product. I TAKE IT ALL BACK. You did a fantastic job on your router table assembly ""I stick to the fact that it would've better with a nice laminated top"" But aside that. FANTASTIC. I've been woodworking for over 30 years. And NEVER that I would've thought of a fraction of what you did with it. Congratulations. Incredible Job!

@carpentak 10 ай бұрын

Wow thank you for your valuable comment

@user-bf9nv7ld7q Жыл бұрын

making it all work together blew me away.

@jan-erikpersson4823 Жыл бұрын

I love to watch your excellent work you do! You are incredible! 🙂

@markhedquist9597 Жыл бұрын

Yes, yes... Quite excellent build. Another commenter mentioned the integration of the router table fence to the table saw fence. Great feature! This whole workstation set-up is just plain fantastic!

@raulsoto2088 Жыл бұрын

Increíble tu trabajo, tu taller, tus herramientas... Todo muy limpio, profesional.... Un gran abrazo desde Chile 🇨🇱🇨🇱🇨🇱🇨🇱🇨🇱 me encantan todos tus videos

@carpentak Жыл бұрын

Thank you for your comments and interest. I wish you a happy new year and good health.

@pjhalchemy Жыл бұрын

38 thumbs up!! Outstanding quality, versatility, and novel design ideas. Love the guide bearing/locks for the fence and the ability to use the saw top for larger routing projects, as well as the curved routing shield. Well Done and great videography! Thanks Very much for the ideas and sharing with the community! Hat Tip, ~PJ

@tonyworkman3042 6 ай бұрын

Awesome job! Amazing

@myeongseokkim2813 Жыл бұрын

끝내주는군요. 목재를 곡선 만드는 것 처음 봤는데..원더풀

@275jesuss Жыл бұрын

Moderately made with table holes and metal clamps (never seen). nice!!

@timthomas4714 9 ай бұрын

I really like watching your channel. Just know sawdust is flammable, vacuuming up the grinder sparks could cause a big fire. I had a grind grinding near a barrel of sawdust, later that night he lost everything in a fire. Inspection showed a small amount of sparks in the barrel caused it. You keep up the great job and I’ll keep watching.

@carpentak 9 ай бұрын

Ok thank you!

@rogerlachapelle4473 5 ай бұрын

all i can say is wow

@jimrosson6702 Жыл бұрын

Wow amazing work. Beautiful router tablet

@bradleytuckwell4881 Жыл бұрын

Another stunning and well thought out build.

@vanildobezerradossantos4131 Жыл бұрын

Simplesmente maravilhoso. Um abraço de Guarujá S P .

@gforcekaras Жыл бұрын

Ingenious setup!

@YunMyeongCheol Жыл бұрын

진짜 예술이네요~ 취미 목공하는 저는 따라하기가 어렵겠네요;; 라우터 테이블은 돈 주고 사는걸로;; ^^

@johnjensen5540 Жыл бұрын

Clever as always. Nice job.

@aiziajg7349 5 ай бұрын

Eskerrik asko Lan ederra eta idei ikaragarriak (egun osoan egongo nintzake zure bideoak ikusi etanikusi) Mila, mila esker!

@_william_581 Жыл бұрын

Well done ☺️👍

@jang3634 Жыл бұрын

잘보고 감니다

@koccocarrasco5696 Жыл бұрын

💯👍🏻👍🏻👍🏻Genial 👏🏻👏🏻👏🏻

@pascalhoarau5030 Жыл бұрын

THE BOSS

@PeterNetped Жыл бұрын

@stfnsipos Жыл бұрын

👀👀👍👍Hat-telya!

@johnwoodhouse3210 3 ай бұрын

If i had his patience 😅

@soncnc Жыл бұрын

quá hay mong dàng được đồng hành cùng nhau

@ginoasci2876 Жыл бұрын

adapting the router table fence to the table saw fence was really slick. i like that a lot. using the scale at the same time, that’s a very good planning. being able to have both tables level and flush with each other is even more impressive because no floor is perfectly flat. question 1: what a miter slot and not a t-track on the router table fence ? question 2: why is the duct port at such a steep angle and not at a lower angle so the hose relaxed ? nice job.

@carpentak Жыл бұрын

Thanks for the nice comment. Answer 1. The miter slot makes it easy to install and remove the featherboard. And I didn't make it this time, but I was thinking of making and installing a transparent safety guard. Easy to install and dismantle. Answer 2. The slope of the duct was installed as high as possible to prevent the hose from going to the table saw. To reduce the hose's impact on the use of the table saw. I don't like sagging hoses, but that's okay.

@bell_nz8008 Жыл бұрын

Wow, very clever indeed. I do not own my own home, but if I did, and had a workshop / shed, I could almost say with certainty that I could spend several years just developing my workshop before even doing a project. there are so many talented people like yourself, that inspire. Thanks for the video. I do have a question though. How do you work out the cut distance to get the curve on / in the plywood. How do you work out the 1/4 radius (I hope that I have said this right) or the curvature?

@carpentak Жыл бұрын

Thank you for your nice comments. I can't give you an answer to your question. Because I do it just based on experience. I don't do numerical calculations with math. I don't have that much math skills. ha ha ha

@dirkbaumann9398 Жыл бұрын

Great tutorials and very useful. Thank You. Could you tell me where you have purchased the red handles on your router table drovers ? On a search for them what would the right name be for those handles ?

@carpentak Жыл бұрын

thank you Perhaps what you are asking about is a feather board. Search like that.

@ferb7452 Жыл бұрын

Nice work Keep it coming By the way what is the white plastic 😊

@Brandon-zo9ly Жыл бұрын

looks like Delrin

@carpentak Жыл бұрын

it is acrylic

@alfonsoparrablesa1364 Жыл бұрын

Felicidades, impresionante trabajo. Hay alguna forma de comprar los planos? Gracias Salud

@carpentak Жыл бұрын

I don't make plans. You have to watch the video and follow along. Thank you

@biznourss Жыл бұрын

Beautiful. What is this red wood?

@carpentak Жыл бұрын

it is an african rosewood

@biznourss Жыл бұрын

@@carpentak ok thanks beautiful wood but i can't find this in France 😆

@user-hl7rb2db5s Жыл бұрын

Доброго времени суток. Как всегда очень интересно и поучительно! Но есть ли у Вас рабочий верстак с тисками? В обозрения что то похожее появлялось, а фактически обзора не было. Очень интересно было бы узнать какой он у вас.

@carpentak Жыл бұрын

좋은 댓글 감사합니다.네 저는 바이스가 설치된 작업대가 있습니다. 그것은 오래전 간단히 만든것이라 제작 영상은 없습니다.

@user-hl7rb2db5s Жыл бұрын

Видимо пришло время обновить его, для всеобщего обозрения😁