It's not just practical when a customer is near your van it makes you look very professional and very organised just the same as your appearance look professional and your works the same. 👍

Racking. Makes a huge difference to productivity when you can get at exactly what you need straight away, really need to sort mine out now!

Racking :) I've just found your page as a happy accident when looking for the essential items needed as a carpenter. I've watched through about 5 of your videos today and i'm learning so much from you. Thank you for sharing your knowledge with the internet :) Hitting the subscribe button

Nice job. I moved away from the side racking in my swb low height trafic and instead created a sub floor above the wheel arch boxing strategically supported by a 2x1 frame. I've got one big drawer from the side door that goes all the way to the other side of the van, it's pretty huge. I did away with all my cases and systainers and all my battery power tools and 3 routers fit in their perfectly. In the rear door I made two drawers using the full width, they go all the way back to the side of the side door drawer, so again, they are huge. I put all other things in them, loads of space and even mastic tubes can fit standing up right. This leaves me effectively an empty floor for my tool bags and stands etc. I further went on to create partitions about a foot high just to keep things separate and stop them flying around and to give the tools protection if I'm carrying doors or sheets over the top of them. , I'm really happy with it and I've got no dead space. I can find things easily and more importantly put them back afterwards easily. Another bonus with the side drawer especially, is that I've got secondary security locks fitted and for a thief the only option would be to peel the top of the side door to gain access, they couldn't open the power tool drawer if they wanted to, firstly there's no space to slide it out, well maybe 9 inches, but also it's all friction fit, no drawer runners, it takes some leaning back to open it normally but would be impossible from above.

Racking, I have the same van and have been struggling on how to rack it, thankyou for the inspiration 😁

Racking lovely job 👍🏻

Racking, hi Lewis Great little racking system and straight forward, I have done a whole false floor of the bottom of my van so I can lay sheets and doors flat and put my long straight edges in between the joists , but definitely restrict getting any sort of tone bag on top as it’s above the wheel arch level , I love the idea of drilling holes for the tubes so you keep them upright mine are in are in a cubbyhole laid in there so it’s a nightmare to see what is what definitely going to do your Method for the tubes, great idea and video mate 👌🏼👍🏻 !!

Racking. Great video

Keep on racking! nice video m8!

Racking. Great use of space Lewis I always love a look in the back of a tradesman's van !! Great Build and great video

Racking great vid - liked the technique with the jig saw

The racking looks tidy , great job .👍

Racking: Neat and tidy, great bespoke racking system mate, always a pleasure to watch your well presented videos

Racking, great job.

Racking, love the videos as always! 🙏🏼 nice job

Top tier racking, that is mate

A cracking van racking video. Loads of ideas for when I finally get round to mine thanks 👍🏻

Super nice racking. Well done.

Racking. Great video thanks for sharing your lessons from your old van

Racking, great video!

Good video, given me some good ideas

Great job! I'm not doing anything for a van, but it's nice to see how I could do racking for my tool shed

Racking - watched to the end. Good video! Subbed

Racking. Great video mate

Great build, well done !!!!! racking

Racking. Spot on, as always Lewis 👍🏻

Racking. Nice job mate 👍

Racking! Tidy work as usual mate, always good to get the van in some form of order!

Nice racking

Great job

Racking. great vid mate

Racking looks good mate

Racking, Nice job

Racking, love seeing how other chippies rack out there vans. Carpet on the shelves is a nice touch, really cuts down on rattle and if you point the carpet pile towards the van exterior it stops stuff sliding of the shelves as well.

Nice racking!

Cracking job mate , did my van this weekend as I was fed up trying to find things

Racking. Great video Lewis as usual. I done my van in lockdown with bits I had laying around. I wish I could start again, but as you know, it's a nightmare taking everything back out again .

Racking love it

Really good racking Lewis. It’s so good when you can find everything 👏🏼👍🏼

Good demo of how to fit out a van for the tools you use. I did get all the way through and thought the result was a good one. Of course, the difficulty is that our workflow tends to change over time, as do our tools. Having loads of little storage areas - as I have in the workshop - can be a problem. I, too, have become rather cluttered in that department, and have to have a periodic clear out, or I just end up spending ages looking for things.

nice job mate

Racking, nice job, keep it all neat 👍

Good job 👍 (Racking)

Nice bit of racking Lewis, love the upside down jig saw skill👊

Racking. Great layout for carpenters van. Look at trade tidy the sell apaper towel holder that your missing or first aid kit shelf

Racking, nice job mate. You can even take the rollers off your stand. And stand it up vertically. Gives you even more room. Makes a massive difference

Racking, another job well done Cheers

Racking, Great job as always mate 👍

Love the new racking, made good use of the space on the drivers side. Racking 😂

Racking. Looks good Lewis 👍

Racking. Looks great mate. Nicely organised 👍

Looks great, what extraction are you using for your plunge saw there? Looking for something similar atm

Def need a van tour mate. Racking

so glad I subbed 18-24 months Like I said glad I did, ur content and presentation style is brill

Racking mate another great video 👌

Good to see another good video doing the racking keep up the good work and have a good Bank Holiday simon

Recently I helped my brother do his van, We built a slightly raised floor so full sheets could be stored without impeding access to the tool rack. Works surprisingly well. Fits around 10 sheets of 12.5mil plasterboard.

Racking, great set up

Racking . Good organisation is key 👏👍

racking starting to look good mate

Racking, something very satisfying doing your racking in the van, I’ve redone mine 3 times in a year and a half and I’m planning on a 4th.

I’m on my second van set and made a slight angle to my shelves…keeps things put. And a small lip stiffens and lets sheetgoods be clamped to the rack face vertically when floor space is needed. Plywood on the ceiling let’s long items have safe storage (tracks and poles)

As expected, another good video, Racking.

Make sure to install all anti-theft measures you can find if you are leaving all of this in there overnight. Nice work, looks much more professional.

Racking 👍well organised

Racking, looking good.

Racking: great job and a good use of space, would put small bungee straps across all the boxes to hold them place 👍

nice fit out basic and functional racking

Nice and neat 👌

Good job with the racking

Racking Nice n tidy now 👍🏻👍🏻👍🏻

Nice racking mate, I keep saying I’m going to do mine but I never seem to find the time to

racking good job ,try to make use of you doors aswell if you can ie foam gun silocone gun ,down pipe bracket and strecher plate for foam gun gutter brackets fof silocone gun and tool belts coat etc. scerw first aid kit eye wash to doors aswel,l round tub off wet wipes fits perfictaly inti a soil pipe bracket .just a few suggestions best wishes from a fellow joiner

when you used the jigsaw you did it underneith, is that how its meant to be done?

Racking 👍🏻

intresting racking video

Racking. Good job makes my effort look awful. I’ll have to learn how to do that scribing as I wasn’t aware

Racking. Will you be able to get the square out ok. Looks a bit of a tight fit.

Racking nice job mate

Racking . Great job mate maby put a small lip on front edge of shelves stop the boxes sliding out when goin round roundabouts I found this out the hard way 😂

Racking turned out well m8, mines constantly evolving.

Racking looks good

Racking!

racking good one mate

Racking. Nicely done buddy, what length screws did you use to fix to the plywood on the van sides?

Nice job mate

Racking nice one

Racking Another good video.

🔥🔥🔥🔥🔥🔥

Nice rack-ing !! Lol, Glad I didn't buy that bungalow, the noise from the speed of those motorbikes going past the house would drive me potty !!! haaha !

Racking 👌🏾

Racking, very interesting this, mine is messy and I hate working like that. I quite like how you sorted level and guide rail storage. Just wondering why you didn't go for lwb when you got a new van, would lwb not suit you better for this kind of work?

Put some carpet down on the floor as it deadens the noise in the back when your driving and it helps to protect something you've manufactured when delivering. Racking

How do you get that racking annually inspected under H&S laws?

Racking !!

Racking. Have you tried getting the square out, yet? Looks mighty tight to me…

Racking👍

Good racking but personally I wouldn't have used glue as inevitably you'll be adjusting things in the next few months. I'd also have angled the shelves to stop items falling out when going round corners.

Racking, looks good mate. We always learn from the ‘great idea’ we had before and what we hated 😂 Hope it works for you 👍🏻

Racking, it suits the purposes mate