Cross Kart SAFETY UPGRADES | 5pt Harness, Axles, Wheel Balance

Рет қаралды 226,292

5 жыл бұрын

We make safety upgrades for our 750cc cross kart! These include a 5 point racing harness, new CV axles to replace the worn out ones, and a very important tire balance. On our first speed test, the front right tire was severely out of balance, and around 55 miles an hour would actually bounce. Next time, we'll finish up the harness, extend the roll hoop, and go for a top speed run!
Thanks for Watching!
Facebook: goo.gl/VR6mh2
Instagram: bit.ly/3T8njaF
Go Power Sports: bit.ly/3QKyODE
NEW MERCH: www.cars-cameras.com/
Equipment we use: www.amazon.com/shop/carsandcameras
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video.

Пікірлер: 950

@CarsandCameras 5 жыл бұрын

Also, before you get your undies in a bunch, we're making the roll hoop taller in the next episode!

@sagecomstock7385 5 жыл бұрын

CarsandCameras was just gonna say ahah, should make a full cage to be honest... wanna be as safe as possible.

@theR6969 5 жыл бұрын

CarsandCameras , what you don't seem to take into consideration that these CV axles are supposed to be balanced too because, well, any rotating mass should, otherwise they will cause vibration as well.

@kaptainkmann7808 5 жыл бұрын

you should tell whoever printed that it'll be fine shirt your wearing to make sure the shirts are reaching a high enough temp for a long enough time to fully cure the ink. white is one of the hardest inks to cure. it's why the print on your shirt is cracking , starting to flake off and the red of the shirt is grinning through the print. a surface temp gun doesn't cost much and it is a way to make sure your delivering quality to your customer's . I have over 30 years in the industry and I am sure of what I am saying. if you want to let me know you saw this I can and will delete it after. my point is not to make people worry about buying one , but to protect you from anyone complaining about anything they have bought from you. Best of intentions love the channel.

@zuestoots5176 5 жыл бұрын

@@theR6969 CV axles are not balanced from the factory. the out of balance is on such a small radius it barely does anything and the design of the joint will take some of the bounce out. In fact, im not entirely positive you could ever get a true balance out of a CV axle.

@tituswilson3689 5 жыл бұрын

1000 likes in an hour nice

@inspireonex 5 жыл бұрын

When you cut "flat bar" in the chop saw, stand it vertical. It cuts faster through a smaller section, creates less heat, and causes less stress on the saw.

@johnnychimpo8111 5 жыл бұрын

Y'all need to find a cb900 oil pan it has a oil cooler on it thay have the same bolt pattern as a cb750

@zcalex7660 5 жыл бұрын

Why not build a oil cooler to the engine they have? Not as hard as it sounds.

@Cee64E 5 жыл бұрын

There's actually an aftermarket kit that goes on where the oil filter is and does just that.

@shadough_ 5 жыл бұрын

I’m not first I’m not last But when I see carsandcameras upload I click fast

@KingsColas 5 жыл бұрын

Spitting bars bro!

@mybackhurts7020 5 жыл бұрын

Ricky Bobby daddy say if you’re not first your last

@ntygrty2924 5 жыл бұрын

not slow not fast just half fast!

@bustinyanutz4195 5 жыл бұрын

If your not first your last." copywrited by ricky bobby"

@carternevill 5 жыл бұрын

@@mybackhurts7020 YESS just what I was thinking

@lactosefarts7963 5 жыл бұрын

This channel just makes me a happy person.

@GoKartsorGoneFishin 5 жыл бұрын

Pops said...shut it down!😂😂good show🤜👍

@lostvalleyrepairllc 5 жыл бұрын

You guys seriously need your own shop and a little land to make a test track.

@seansgarage3178 5 жыл бұрын

like quad ricers

@wesleywilliams6971 5 жыл бұрын

@@seansgarage3178 i love quad ricers

@crazypjk 5 жыл бұрын

Ike has a mechanic shop.

@ronaldwhittaker6327 4 жыл бұрын

said that from the start the house is just to nice to tear shit up in the yard and his folks deserve piece of mind

@garbagefpvproductions859 5 жыл бұрын

On today’s episode of Cars and Cameras, John loses all his neighbors.

@Vindictus67 5 жыл бұрын

With open pipes, it's more likely that they want to lose HIM....

@dakotadriggers8838 5 жыл бұрын

Im suprised they didnt threaten to call the cops like with the drift trike

@FloridaMan0561 5 жыл бұрын

More like they completely lose their shit.

@blainehix8225 5 жыл бұрын

You guys should get a racing seat. Like a Kirkey or a JEGS seat. Relatively cheap and way safer. It would also help you mount the seatbelts the more correct way. 😂 great video

@jasonpeizer9042 5 жыл бұрын

This.

@toolshedjunky 5 жыл бұрын

@@jasonpeizer9042 Get.

@josephyost22 5 жыл бұрын

Yes!

@72mardy 5 жыл бұрын

Agree

@DocumentaryHub 5 жыл бұрын

I said it many times before.... It needs a fuel pump. Just get the original one that came with the donor bike, or a one designed for carbs. The fuel pump is needed when you ask a lot of it. That's because gravity isn't enough to fill the carbs at high RPM.

@ghomerhust 5 жыл бұрын

yeah those are pretty big carbs, and a lot of CCs to keep fed with fuel, a lot more than a built 420 is gonna take

@2strokesmoke857 5 жыл бұрын

My xj is like the same set up but little smaller it 70 something hp and it 100 cc less

@donraabe3529 5 жыл бұрын

I bet your neighbors just love you guys 😎

@castlemania08 5 жыл бұрын

A question we all ask ourselves at one point in our lives; "Should we get this in before the cops come?"

@bobsbarnworkshop 5 жыл бұрын

Sounds like what my brother said after a 150mph run down the 4 lane in my dad's 68 Roadrunner! HA HA!

@raysplace6548 5 жыл бұрын

😂😂.. Every damned day..🍻🍻

@rons7472 5 жыл бұрын

Love the videos. You guys should really invest in a welding blanket to cover fuel lines/tanks...

@CarsandCameras 5 жыл бұрын

Did you notice the squat at 11:16? With enough RPM and traction, it'll probably wheelie.

@VasilyBuilds 5 жыл бұрын

Sure! I think taller and softer suspension in the front so it bounces up easier.

@adamc1713 5 жыл бұрын

I'd expect the clutch to slip long before that. Remember you have more than double the traction compared to the motorcycle that engine came from, and probably more weight. With an upgraded clutch though..

@justinfisher36 5 жыл бұрын

You need to put Hoosiers on the rear like I put on my mower. I used 2 right rears from a mini Sprint. I sent you a picture of it a couple weeks ago on Instagram. Loving the build it's making me want to tear my mower project down and build a cart.

@mitchthompson3246 5 жыл бұрын

Obligatory 'like a slav' comment.

@terryjean91565 5 жыл бұрын

Hello?!?!? it better !!!! lol

@mickey61381 5 жыл бұрын

NOW THAT YOU GUY'S HAVE FIXED THE PROBLEM WITH THE SPARK PLUGS, I'LL BET THERE IS NOTHING WRONG WITH THE ORIGINAL CARBS.

@stoker20 5 жыл бұрын

@@MAXIMUMWEDGE +1

@suzukietc1373 5 жыл бұрын

@@MAXIMUMWEDGE they have spare emulsion tubes and jets

@quevicular 5 жыл бұрын

exactly

@JustStayingGroovy 4 ай бұрын

No such thing as too many carbs

@kenjohnson5498 5 жыл бұрын

I noticed the eye poker bent to the side glad to see that, don't know you guys but would hate to see you hurt. I can't wait to see it painted and ripping down the road.

@ericwhiteker1258 5 жыл бұрын

I’d flip the fan around so the shroud is blocking debris

@MartinRanger65 5 жыл бұрын

Eric👍🏼👨🏼‍🔧 was thinking the same thing hope it’s not too late for them👨🏼‍💻

@bobsbarnworkshop 5 жыл бұрын

they have to look at the shape of the blades of the fan to run it in the proper rotation for best efficiency...

@Acoustic_Theory 5 жыл бұрын

Yes, the fan blades are also directional. They are not just angled - they are curved to accelerate air more efficiently along the surface, and that curvature works best when the fan is oriented with the side having no grille toward the item you want to cool.

@RaisingLionsNotSheep 5 жыл бұрын

If they flip the fan around the flip polarity too and I still works the same

@Acoustic_Theory 5 жыл бұрын

Nelson Bettencourt No, it’s not that simple. The fan blades are curved so they only work efficiently (generate max airflow) if the fan is rotating so that the blades are curved into the air. This is part of the geometry of the molded plastic blades, and cannot be reversed just by making the fan spin backwards. The blades themselves are directional. So no, it is not as simple as reversing the polarity. Read what I wrote earlier.

@michaelcolbert5797 5 жыл бұрын

Your dad is an absolute saint! I’m guessing he’s about my age... Love the channel!!

@dustinh4175 5 жыл бұрын

Your lucky to have Isaac as a mentor. He's a pretty smart cat so pay attention and someday you can pass on all those cool old tricks and tips

@johnclary729 5 жыл бұрын

Forget the tabs, go with wrap around shoulder harnesses. Use the full strength of that tube.

@shartne 5 жыл бұрын

I dont have lot of confidence in the roll bar it needs a more beefy design. Like a bigger diameter DOM Tubing.

@nashguy207 5 жыл бұрын

I think you got a thrashing from Dad!!!

@robmanueb. 5 жыл бұрын

Congrats on cracking the UJM formula engine and frame combo. Been watching you channel for years and watching the comments from people begging for a Japanese four cylinder motorbike engine in one of your projects. This is a watershed moment for C & C and I think we should savor the win. From here things can only get more insane, you will be able to swap in later model or larger cc engines with ease, giving you access to anything from the current 70Hp to three times the grunt. This is one you will be able to "grow" into.

@brokebikemtb4448 5 жыл бұрын

Johns face when ike gets out the cart....like he just met a whole new ike

@Lysdexis 5 жыл бұрын

When you guys mentioned this project I had really envisioned this thing having more ground clearance. Those tires are insanely small for an "off road" cart.

@bdhale34 5 жыл бұрын

Some taller tires, maybe around 2" taller, and mufflers would make it a lot better for sure. You can have a lot more fun, for longer, if you're cart is quiet than you can if it's overly loud (which this thing certainly is, honestly almost all of their projects need mufflers).

@Lysdexis 5 жыл бұрын

@@bdhale34 the stock miata wheels and tires looked fine. And a 4 2 1 header with a baja bug style cannon would work the best and probably sound the best.

@norm1233 5 жыл бұрын

Best build yet on your channel love big builds

@Everett-xe3eg 5 жыл бұрын

Love to see you boys go fast and stay safe! Gonna watch this right after work Love you Isaac!

@babook96 5 жыл бұрын

😉 Dad comes out at 12:38 .... Love it, just like home... Two thumbs to Dad... Must be a very cool guy...!

@joshuacook8326 5 жыл бұрын

Y'all should put a kirkey racing seats in it 🤷🏻‍♂️

@samsvintageoutboards6847 5 жыл бұрын

Love the kart guys keep up the good work

@CH-gq8es 5 жыл бұрын

This is absolutely an awesome build. I've watched every video and sit for days waiting for the next updates. Great job guys

@somdood3292 5 жыл бұрын

this channel is one of 3 of my daily "i cant wait to see the next vid" channels and has been so for for like 2 years now. everytime i watch you guys it makes me want to go buy a welder, and angle grinder and make my own build. Never quit this channel. ever. please and thank you.

@livelaughlovelife1830 5 жыл бұрын

Also it would be nice to see a bulkhead or some kind of firewall in between the driver and that engine an axial/moving Parts just in case something was to ever happen.

@davidingling9791 5 жыл бұрын

Hell of a go kart u got there

@parkerpack3498 5 жыл бұрын

This is absolutely awesome, thanks for the good content guys!

@michaelzilio4268 5 жыл бұрын

Love engine with gears.. love buggy's & co finally a fantastic build in all sens! Congrat's guys

@GaragebandandBeyond 5 жыл бұрын

Put a good muffler on it and make sound like a small super car.

@mainemakersgarage5266 5 жыл бұрын

A 4 into 1 would sound outstanding!

@GaragebandandBeyond 5 жыл бұрын

@@mainemakersgarage5266 Like this one kzfaq.info/get/bejne/hp58h7xk3s6cpHk.html

@TechKnowCSS 5 жыл бұрын

What is the max amp draw of the fan and max output of the charging system? Might end up with a dead battery real fast.

@jeffkelzer953 5 жыл бұрын

Absolutely love what you guys are building. I wish i had the spare money to build one. Lots of smiles for every mile!!!!!!!

@Pittsburgh-412 5 жыл бұрын

By far the best kart you've guys made to date. Just awesome

@plankhill 5 жыл бұрын

might want to turn therm Zoomies out... they blowing right on your CV Axle and outer bearing / Hub. wont last long that way.

@keyz147 5 жыл бұрын

Make a fiberglass body around it 👍🏾

@EvrttGrn 3 жыл бұрын

That's my motto, "I need to get this in before the cops show up." LOL Love your builds. Working on a Manco Intruder II I picked up for cheap and hope to get going again this weekend.

@Edtho 5 жыл бұрын

Love the cross cart can't wait for a top speed test

@77Zach 5 жыл бұрын

You guys are losing alot of power with the twin carbs you need to go back to the stock caeb and the pod filters with some jetting if you want all the powwr you can grt and it qill run great

@josephyost22 5 жыл бұрын

I’m early! What’s up carsandcameras! Love your videos!

@Gopherdave1 5 жыл бұрын

I think that's the best thing you guys ever built, next level! Awesome!!!

@AlphaMachina 5 жыл бұрын

Awesome job, guys. Gud nuf fer gubment werk.

@TheKanati09 5 жыл бұрын

Wrap the harnesses around the bar like an actual race harness. No need for tabs

@MoondyneJoe 5 жыл бұрын

John and Ike, what about using the instrument cluster from the donor bile for a speedo and tacho within eye shot to monitor Speed and rippems? Keep safe guys BTW IKE you should know this one,How can you tell if a biker had a good ride?A by the bugs he collects on his teeth ! Tony from Western Australia

@fillg 5 жыл бұрын

Would the speedo work right since the wheels are so much smaller than the original ones on the bike? I don't know how those things work but I know if you get the wrong size wheels and tires on your car it messes up the speedometer.

@MoondyneJoe 5 жыл бұрын

fillg,using the instrument cluster from the Honda 750 you could replace the standard speedo with a GPS Speedofor examplewww.banggood.com/buy/gps-speedometer.html?ad_id=284941778592&gclid=Cj0KCQjw4s7qBRCzARIsAImcAxaGAK1oqi_wa0vvIFliqNnfdjOWcCHYFhoNdZw4iMubp96_jsIavLcaAr_MEALw_wcB There are many around Also Chris over on Rather B Welding has one on his new buggy Tony

@BorckBorckBorck 5 жыл бұрын

The harness mount needs to be by your shoulder blades....look it up. Safety first brothers.

@GenevaCustoms 5 жыл бұрын

Just seeing that pine cone of whatever it was that launched up into the cv axle made me think that since it’s going to be like a off-road rally kart it could probably use some kind of deflectors like most atvs use to protect the cv axle/boot from hard sticks rocks etc, mainly the boot being torn by something as stupid as a stick just a thought!

@joolwing 5 жыл бұрын

Give the cops a T-shirt....it’ll be fine.

@billyboy5691 5 жыл бұрын

and in the next vid, you guys should do paddle shifters.

@TheBigWhopper420 5 жыл бұрын

All smiles here watching this one! That thing is BADASS! -Thoughts about the tabs, wrap some flat stock into a P around the bar you welded in. Weld 'em in place with the flat part on top. Should be good to go! Love your work, keep going!!

@skrillfighter1731 5 жыл бұрын

Love you. Keep up the awsome work

@johnboy201028 5 жыл бұрын

What brake master cylinder did you end up going with man

@therealfaintinggoat 5 жыл бұрын

FIRST! More importantly, love this build. Great content as always gentlemen.

@shanerathburn9734 5 жыл бұрын

Jj?no

@livelaughlovelife1830 5 жыл бұрын

Looking Soo sweet! Keep up the great work!!!

@stevebutcher6117 5 жыл бұрын

This is my favourite kart build you’ve done and I’ve watched all your builds. Your much better at welding and fab work compared to the early days. Keep up the good work. From the UK.

@gokarting1018 5 жыл бұрын

I’m so early I beat the notification text

@mitchthompson3246 5 жыл бұрын

At some point you will have just built a high performance sports car. Next up, carbon fiber body.

@krisjato 5 жыл бұрын

Another great video! That thing definitely needs to go to the drag strip!

@mw4518 5 жыл бұрын

It's so annoying that people just complain and complain about your build. It is YOUR build, and it's FREAKING AWESOME.

@MartinRanger65 5 жыл бұрын

Have you thought about a foot shifter? The way God intended motorcycles to be shifted?LOL 🏍

@toolshedjunky 5 жыл бұрын

How would you operate the clutch then?

@MartinRanger65 5 жыл бұрын

Put the shifter on the side of the frame back with the toe shifts up , push down on the lever shift down👨🏼‍🔧

@toolshedjunky 5 жыл бұрын

@@MartinRanger65 That doesn't answer my question.

@MrFixit1 5 жыл бұрын

@@toolshedjunky Hand clutch maybe

@MartinRanger65 5 жыл бұрын

With a motorcycle you only have to use the clutch to get rolling, then one blip of the throttle pull the lever it shifts with no clutch!

@DavisJDaniel 5 жыл бұрын

no matter how much you believe it there is no way its making 70hp breaking up the way it is

@dallassimeon1274 5 жыл бұрын

That intake setup is absolutely killing it.

@thomasblueschke6938 5 жыл бұрын

Greatings from Berlin Germany. Watching your projects now for a while. But this is a awesome build. I'm exiting to see how it grow further.

@FAL0perator 5 жыл бұрын

You guys are awesome!

@quentin8094 5 жыл бұрын

I don’t think a muffler is needed now

@Zark-Muckerberg 5 жыл бұрын

No, it's still needed.

@quentin8094 5 жыл бұрын

Zark Muckerberg nah

@koryflamand96 5 жыл бұрын

This is just amazing you guys are so talented I love this it’s so cool and right when I saw this video I clicked it as fast as this kart

@mathdebates7936 5 жыл бұрын

Looking great

@deanblaylock264 5 жыл бұрын

Love it guys keep it up

@shawnmrfixitlee6478 5 жыл бұрын

you guys need to change the oil and filter on that engine , Great share guys !!

@TheGreatBooger 5 жыл бұрын

Thing looks and sounds sweet. May end up doing the same reared set up on a project of mine, then make a jig to make the a-Arms. Awesome work for sure. Keep it up and can’t wait for the high speed test.

@davidwibben9886 5 жыл бұрын

This is the best build so far!

@13anomalous16 5 жыл бұрын

I really fucking love this series so much

@badsplinter 5 жыл бұрын

Get the feeling this is one of the most well balanced rig you guys have constructed. Really nice.

@ronburm6503 5 жыл бұрын

Love the build yall

@kartssource5467 5 жыл бұрын

Glad y'all are staying safe! As for color, I say deep blue! With sparkles!

@jenb4168 5 жыл бұрын

love these guys

@dale5898 Жыл бұрын

You guys have to be proud of yourselves. What an accomplishment.

@lazydog1964 5 жыл бұрын

Have to give a shoutout to whomever shot the video and did the edit. Great work

@dajiban9325 5 жыл бұрын

Jolly good show!

@gmfb33024 5 жыл бұрын

lol I love it I love how his dad came out like bring it in 5.0 comin

@michael_jullie2836 5 жыл бұрын

Love the vids ‼️‼️‼️‼️

@shawntl 5 жыл бұрын

Getting there keep up the great work

@georgemueh3273 5 жыл бұрын

Lol you need to name this..."shut'er down"....and let your Dad pick the color. So far so good🤘👍

@sheldonhall4572 5 жыл бұрын

It's exciting seeing the progress! I think a bright yellow would be awesome for the chassis :)

@Timbo428CJ 5 жыл бұрын

That's sick guys ! 👍

@DYLANTRIES 5 жыл бұрын

Great work guys!! Also ike looks like he has some experience with that

@NotYourGuy12 5 жыл бұрын

Y’all are so cool I love your vids

@jeppebundgaard8609 5 жыл бұрын

Amazing channel guys.

@SuperMario133 5 жыл бұрын

That unit is awesome 👌🏻

@DerredmaxTRIAX 5 жыл бұрын

Lol Dad tell's Isaac "It ain't Fine"!

@fillg 5 жыл бұрын

I had to do rear bearings on my Miata a while back and that wheel nut was definitely a bear. My breaker bar wasn't as long as yours though. What ended up helping me was putting a jack stand under the pivot point of my breaker bar so I was putting all my force into turning instead of the whole thing slipping off the nut and rounding the edges.