We Broke Our 4WD Power Wheels Go Kart on the FIRST JUMP! Road Test, Fuel Tank, Floor Mounted!

Рет қаралды 209,664

3 жыл бұрын

We change the final drive gear on our Tillotson 228cc powered four wheel drive power wheels go kart, and take it for a spin! The gearing is still too tall, but it’s already performing much better. Ike takes the power wheels go kart off a jump, and soon after the front suspension falls apart because we hadn’t used proper locking nuts during assembly. We bolt the front suspension back together with the proper hardware, build floor pans, build a fuel tank and seat, and take it for another spin. We still need a gas and brake pedal, and a slightly shorter gear, but so far this little ford bronco go kart rips and the suspension feels great!
Thanks for Watching!
Facebook: goo.gl/VR6mh2
Instagram: bit.ly/3T8njaF
-----------------Go Power Sports Parts Used in Today’s Video----------------
Tell them CarsandCameras sent you at checkout:
Mechanical disc brake kit: bit.ly/3gx4URO
4” brake drum, 1” bore: bit.ly/38FrZyl
4” brake band: bit.ly/38FEgD5
Heavy duty cable: bit.ly/2ZzU5Fc
Fuel pump: bit.ly/3rC9ByU
Gussets: bit.ly/38VUN63
Go Power Sports: bit.ly/3QKyODE
Get $100 off any Langmuir Systems Crossfire CNC plasma table using this link, or use code CARSANDCAMERAS at checkout: store.langmuirsystems.com/discount/CARSANDCAMERAS
NEW MERCH: www.cars-cameras.com/
Equipment we use: www.amazon.com/shop/carsandcameras
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video.

Пікірлер: 741

@CarsandCameras 3 жыл бұрын

THANK YOU to all of our viewers and supporters in 2020! It's been an interesting year. Corona hit, we hunkered down. We moved into a new space, built two very challenging custom projects, and made three special episodes (with more in the works). Looking forward to a more SOCIAL 2021! Happy new year!

@bdog9633 3 жыл бұрын

Can't wait for mini mayhem

@danf4616 3 жыл бұрын

👍

@Jomama1993 3 жыл бұрын

You guys should add a push bar and a wench to it so it doesnt plow steer anymore

@jasonhendrie5411 3 жыл бұрын

Merry Christmas and a happy new year john and ike love your vids hope more to come👍👍🤟

@DetroitMicroSound 3 жыл бұрын

it needs a good 4" added to the length in the cockpit.

@eidolusgad3818 3 жыл бұрын

And to think, this was the project that you were going to take to Idaho...

@TheOutDoorDaniel 3 жыл бұрын

Lmao!!!

@shadetreemechanicracing22 3 жыл бұрын

That thing is so cool. Best thing you've made since the radio flyer.

@donellmuniz590 3 жыл бұрын

The Radio Flyer was bitchin! And Ike was too big for that one too! And the Cozy Coupe. And the Little Rascal. And others. I bet he sometimes wishes he was 5'6"! 😂

@peterhellberg887 3 жыл бұрын

Happy new year guys! Im looking forward to next years adventures. :)

@360nastybusiness 3 жыл бұрын

Hell no..this is way down the list.

@donellmuniz590 3 жыл бұрын

@@360nastybusiness agreed

@ThatMinecrafter 3 жыл бұрын

What if y’all had made a jerry can looking fuel cell on the rear of it

@samsquanchchronicles 3 жыл бұрын

That'd look great!

@nerdsorandom6252 3 жыл бұрын

I have power wheels with a lawnmower frame under it and I had a one gallon Jerry can that I had the back cut out of to store my battery in

@theeturnone 3 жыл бұрын

it would be awesome if the did that. but they made a modified jerry can. . like cut one up, and make a miniature can, to match the truck :) ********edit******* oh wow , i didnt get to 19:21 before i commented. their tank design is actually pretty cool peace, TheEturn

@aaronmorris5403 3 жыл бұрын

Or a circular one that looks like a spare wheel

@chrislogan5086 3 жыл бұрын

Actually really good idea, kinda fit the theme 🤔

@27Zangle 3 жыл бұрын

This project needs about a one-foot extension. I love the look though!

@theeturnone 3 жыл бұрын

"So how do you wanna play this?' "just open up the doors" i love these guys. . lol that 3 wheel action is awesome @07:43 peace, TheEturn

@tracythorn2918 3 жыл бұрын

It's fun to watch these projects evolve and get dialed in. Somewhere there's a talented 12 year old who could comfortably put it through its paces.

@Builditathome-Restoration 3 жыл бұрын

Really cool how you guys take a whole other route to make a power wheel! My dream is to collab with cars and cameras on a dirtbike project!

@OriginalCheesemoose 3 жыл бұрын

Maybe swap a 212 into a legit dirt bike frame? That would be rad as heck

@la_plata3588 3 жыл бұрын

@@OriginalCheesemoose already been done mike fiesta built one

@la_plata3588 3 жыл бұрын

Already been done dude in Europe made a 4 wheel drive just like this they just copied him

@Builditathome-Restoration 3 жыл бұрын

@@OriginalCheesemoose exactly what i was thinking!! Haha

@DarkLinkAD 3 жыл бұрын

@@la_plata3588 I saw 4wd monster truck carts for over 30 years and GHP has a 4wd too no?

@williamlee1429 3 жыл бұрын

My gosh! There is a lot of technology in this thing for a simple little go cart. It’s got NASA level gantry crane bracing, Indy 500 simulated sprockets, heavy construction chains and gearing. All without any cad cam drawings or even so much is a scribble on the back of a tavern napkin. Incredible job

@metalmyke1 3 жыл бұрын

You could throw together a best of crashes compilation.

@Zark-Muckerberg 3 жыл бұрын

That would 90% John crashes.

@jodiepayne1541 3 ай бұрын

THE LITTLE BRONCO IS BADASS...AWSOME BUILD.....SO SICK

@vancemacd6315 3 жыл бұрын

The one thing I wish, is that your builds start off with somewhere comfortable for your legs then start to design around that. I do love this channel , one of my top 5.

@mikebruce6037 3 жыл бұрын

This has been my favorite build so far. Can't wait to see it completed.

@bryantthornock8215 3 жыл бұрын

Just a little tip for the next time you guys make a sealed container. If you drill an air/pilot hole before you seal of the last few areas with weld material you won't get as many leaks in those welds. If you don't do that, it essentially does what it did when Ike was trying to weld with it pressurized but not so drastic. This is just something that I learned when I was doing a pressure box in my welding class at school. Thanks for all of the great stuff you guys do! It has inspired me more that you might think.

@volsfan9062 3 жыл бұрын

Once this thing is ready to go completely it will be a riot! I am looking forward to seeing it put to the test. The 4wd setup is brilliant btw. Great stuff guys

@josephrichichi3116 3 жыл бұрын

When I first started welding and fabrication I was not allowed to do a single thing until I had a good blueprint anyone could use to build the same thing and understand it. As much as it sucks and consumes time I suggest it! Better blueprints better builds! Either way I love what y’all do I just feel like y’all could be that much better!

@devivoman 3 жыл бұрын

Thanks for making 2020 more bearable! Hope you guys had a merry Christmas and hope you have a fun and safe new years! May 2021 be the year of the worktable for c&cr!

@RCDisiac 3 жыл бұрын

That was the most proper fabrication from IKE I've seen to date

@rushley5813 3 жыл бұрын

Seeing ike crawling with the bronco in the kubota looked super sad almost like yall needed to play taps in the background great build guys

@wrenchandrip 3 жыл бұрын

even though its way too soft it is cool to watch all your suspension work in action

@r6quickify 3 жыл бұрын

Got a welder for Christmas! Now I’m ready to start some projects of my own. Thanks for all the inspiration from your builds. Hopefully y’all can get a mini-mayhem together in 2021.

@christophermorin9036 3 жыл бұрын

I have never seen you guys make such a plush, cushy suspension before. That thing was built for high speed stretches. It's like a MINI Trophy Truck lol.

@jeffreycarroll9956 3 жыл бұрын

I thought I missed an episode when I saw the title of the video. At least it happened near the shop, and not in the woods at dusk. Great work as always guys!

@jeeper426 3 жыл бұрын

old chevy C10, and Ford F1-F100 fuel tank is mounted inside of the cab behind the seat, and Willys MJ and CJ1 and Jeep CJ5's, the fuel tank is under the drivers seat, sweet build, and i cant wait to see this thing completed and hopefully y'all can do a collab with grind hard plumbing and rather b welding again

@cokeacolasucks 3 жыл бұрын

"That'll do donkey" cracked me up 🤣

@fillg 3 жыл бұрын

The ol "hold the gas tank in your lap" test drive. Good times. When I built my first motorized bicycle I got totally soaked with gas on my first test drive. The tank was between my legs and right on top of the engine. It got pressurized from heat build up or something and it was spraying gas everywhere. I probably should've walked it home but I was too stupid and just loosened the cap and kept on riding.

@zacharybrubaker6893 3 жыл бұрын

Dam Ike!!! This channel has been missing something and I think it’s been the beard!!! Keep up the good work boys!!

@Legoman585 3 жыл бұрын

The power wheels looked awesome coming around the corner before the jump.

@troyrhoadarmer8974 3 жыл бұрын

Great job guys. You all have come a long ways since the beginning and it is so great to see you guys grow. Happy new early.

@ashtoncrow9368 3 жыл бұрын

That tank is way tougher than any motorcycle tank. Good looking build y’all!

@humpday2267 2 жыл бұрын

Not my titanium fuel tank that came factory on my crf450r. Stronger and lighter. What a bold statement you made there. Noob

@davesonsadventures474 3 жыл бұрын

It’s gonna be epic! I was skeptical at first because how short the chassis is,but it looks like it’s going to be a ripper! Great job fellas 👍🏻

@braapboys5619 3 жыл бұрын

“There’s good fortune coming to you or something” little did he know

@EverydayLayman 3 жыл бұрын

It was the or something

@tonysvetic220 3 жыл бұрын

I got a 212 predator for my mini bike today because of you guys

@Tampaboys 3 жыл бұрын

Heck ya that little cart rips guys that’s so cool

@howardjones695 3 жыл бұрын

Chain Gnaw /CHān nô/ (verb) the act of removing material from practically anything that rubs against a moving chain. "You don't have to worry about chain gnaw on your foot with the chain guard installed. Wow, that's nice!"

@michaelsomers9533 3 жыл бұрын

This is a beast of a project keep up the great work love the work yous do. all the best in the new year 2021

@jeshua7103 3 жыл бұрын

Drilled a hole in the tank and sealed it up without cleaning the metal out nice Haha

@slackersteve2004 3 жыл бұрын

the noise towards the end is the bottom of the spring hitting the frame, the tank and seat look awesome i think itll work real good

@jakeorsak5136 3 жыл бұрын

Brakes are just the luxury option. No brakes just make the ride more fun.

@cafn8ed74 3 жыл бұрын

15:07 "Permanently repaired" - good one.

@twocvbloke 3 жыл бұрын

I think the sign the vulpine visitor was giving was y'all done foxed up with them nuts... :P

@gqp3215 3 жыл бұрын

There ya go. Got right front geometry is what thats called. Fabricate. Nice table. Makes it too easy. Used to oxy/acetalyne

@SportbikerNZ 3 жыл бұрын

This was a great episode. It's shaping up awesome.

@Everatti 3 жыл бұрын

I love these longer episodes. Keep em coming!!

@ronniepate4315 3 жыл бұрын

You guys have put together a lot of entertainment and laughs this year . When we needed a break from all the stupid stuff that's been going on . We also learned some ways to fix problems one might run into while trying to build something from scratch . I hope you both had a Merry Christmas and have a Happy New Year .

@JohnSmith-mf6tq 3 жыл бұрын

If you look up a go kart top speed calculator, you can input your sprockets, tire size, and engine RPM, and get a very good estimate on your top speed without the guesswork. Tork-a-Verters generally achieve a drive ratio of 1.0 to 0.83 overdrive, so you can expect up to a 20% increase in top speed over what's calculated.

@chevyguy5525 3 жыл бұрын

Great video as usual guys! This thing is gonna be a REAL handful

@mrnautilus 3 жыл бұрын

If you guys want even more torque, they sell higher tension (yellow) springs for the driven pulley on the 30 series. I just put one on mine and the difference is very noticeable. It keeps the torque converter locked in a lower gear ratio longer.

@shakyhandpictures2185 3 жыл бұрын

Happy new year boys, thanks for the hundreds of hours of hard work you both put into this, great Job!

@chriskalomiris4377 3 жыл бұрын

Coming in from East Texas, I've been watching y'all since day one. Love it !!!

@robertbelote5273 3 жыл бұрын

Ah man it looks cool up in 3 wheels leaning back. Nice job on the build guys.

@carwynvan 3 жыл бұрын

When that suspension went it looked like it had real potential to be a mean looking low rider 😂

@willbarfield166 3 жыл бұрын

Dangit bobby

@bobbystaley9709 3 жыл бұрын

What

@willbarfield166 3 жыл бұрын

@@bobbystaley9709 bahahahahaha

@bobbystaley9709 3 жыл бұрын

@@willbarfield166 Lol

@RadMachines 3 жыл бұрын

Looks like what I wanted to do can wait! You guys motivate my channel!

@outlawed_kustoms3825 3 жыл бұрын

You guys ever gonna use that aquarium thats always in the background? I think a couple dozen glow fish would look good. Lol. But this is an awesome build. You guys have motivated me to build some of my own projects and continue to amaze me with the ingenuity you come up with, especially when its on the spot. Keep up the hard work. Cant wait to see the final product. And the new shop.

@DTMotorcyclesEssex 3 жыл бұрын

Another brilliant videos guys keep them coming !!!! 💯

@ToxicFruit 3 жыл бұрын

Can’t wait to see y’all hit 1M subs in 2021!! Also REALLY hoping Pate 2021 works out!

@adammullinger6848 3 жыл бұрын

Boom just waked in and this popped up time to chill.....

@timfetters5115 3 жыл бұрын

Here’s my advice to help you have a happy and prosperous new year: if you find leaks in the gas tank (which is awesome, btw) after you’ve put gas in it, don’t touch up the welds! LOL Pour a liner in it.

@85superchris 3 жыл бұрын

Johns hair is awesome. Lol I'm in the wild hair club too buddy.

@wrenchandrip 3 жыл бұрын

looks like it rides like a cloud! well done boys

@gmservicescornwallltd4427 3 жыл бұрын

Season greetings everyone.itll be fine.👍👍 Mike in UK.👍

@jamesmcgee9279 3 жыл бұрын

This kart is awesome guys. There are plenty of free gear ratio calculator apps out there. Forget all of the guess work and take advantage of those Phone apps.

@MarkLoves2Fly 3 жыл бұрын

That looks great guys!

@richiefearn4214 3 жыл бұрын

Hope you guys had a great Christmas,see you guys in 2021,great episode 👍👍

@Shredxcam22 3 жыл бұрын

Use cotter pins and castle nuts on all suspension parts. Overdrive the front axle to help with steering

@OriginalCheesemoose 3 жыл бұрын

You could put foot pegs behind the front tires and integrate fenders. That would probably make it much easier to control center of gravity, and Ike would fit better

@TimberTrainer 3 жыл бұрын

No worries about sitting on the fuel tank. Most motorcycles have the tank right in front of you or under the seat. I'm literally laying on my fuel tank hugging it on a crotch rocket. It's definitely safer sitting on the fuel than holding it loose under your arm.

@RJDCR 3 жыл бұрын

that thing is sweeet , I love it...Rock onnn guys RJ

@Nevertrustalawyer 3 жыл бұрын

Sure, John fits in it, just don’t let him drive it!

@jamesglenn2006 3 жыл бұрын

She cruises guys that's the main thing. Maybe castle nut/cotter pin setup?

@montanababy3362 3 жыл бұрын

I received my merch today!!! Thank you Ike and John for the sticker with yall signing it. Made the gift that much better 💯💯💯

@monroereynolds8922 3 жыл бұрын

John and Ike love the videos I have been a fan ever sense the first video till now .. I’m gonna try to come and see y’all at the tour new place or something like that

@brsrc759 3 жыл бұрын

I'm loving the progression of this thing! One thing I want to mention, and I hate to say this because it's gonna be a lot of work, but I really feel like you guys should extend it a little bit. It's just sooo short. Plus that would really help Ike out.

@martincloutman2187 3 жыл бұрын

The front wheels looks a bit thin compared to the back. A thicker tyre might help with front grip, but cocking the front during middle corner looks fun 🤩. Great content as always guys

@BunkerBlog 3 жыл бұрын

This is your coolest project yet!

@brentwagner4628 3 жыл бұрын

I just love when y’all post

@aaronmorris5403 3 жыл бұрын

Looking real good. Once you stiffen up the suspension at bit, it should ride real good. You should use some seam sealer on the fuel tank to double down on the leak prevention.

@toshayonguard4253 3 жыл бұрын

Holly Hell that Chassis is Fighting it self. Watch the footage.....I see a lot of stress on that Driveline.

@octane613 3 жыл бұрын

Full time 4wd with no diffs, the chain goes through a lot of tensioners, and the tires are slightly different heights. But, it works enough to be fun.

@kurtisheard4325 3 жыл бұрын

I have a challenge for you John and Ike, do a power wheels corvette drift build. You'll have fun with it.

@mitchellwomack1014 3 жыл бұрын

Love your channel and all your projects.

@Fungusamnguss 3 жыл бұрын

Send it. Bend it. Mend it. Nice episode!

@lucasnolte3258 3 жыл бұрын

It’s Primes the fuel lines when you sit down😂

@jamest.grayjr.1949 3 жыл бұрын

Hope you guys had a great Christmas and have a happy new year day and I will see your channel on January 4

@hybiepoo 3 жыл бұрын

You guys need to get yourselves a TIG. It would have done a superb job of that fuel tank, and holes are much easier to fix neatly.

@rexsterlingbuchanan2929 3 жыл бұрын

Right on guy that's one hell of a four-wheel drive system. I don't know where you got your inspiration from I guess we'll have to go back and watch that one haha

@johnnybikesalot 3 жыл бұрын

I would love to weld a squishy suspension like this onto my basically rigid manco dingo, that would be so cool.

@bluestripes1 3 жыл бұрын

the soft suspension looks like its working great offroad!

@albertmdh 3 жыл бұрын

Good job boys, cut up a cheap yoga mat and use it for some cushion on that tank. Will give Isaak his 1/4 inch back.

@Tanks4Tots1 3 жыл бұрын

You all might want to consider under drive gearing on the rear I would start with aprox 4% this will create an over drive on the front and help with a tighter steering radius.

@thegoodson2000 3 жыл бұрын

This, or let air out of the front tires, and add air to rears.

@micahlevoy1357 3 жыл бұрын

Yes that will help a lot with steering

@tigattac 3 жыл бұрын

That gas tank is nice, serves two purposes. But the rear shocks is way off normal setup. They need to be almost straight up, to work best, not like horizontal!!!!! Mount them outside of the tank, straight down to the hub. just like the front ones, and you have several problems solved, trust me. Else, it is pretty damn cool!!! Glad you went for the disk brake, those drum brakes on the clutch are for kid-bikes only.