I can't see how you caught that, Warren!! You even told us, and then printed on the s teen afterwards, and I still missed it. It took me stopping the screen in different places, and studying the screen until I saw at 26:42 what you were talking about!! That was a close one for sure!! I still can't see how you caught that half a second blurb on e screen!! Amazing catch for sure!!

Just wanted to say i really enjoy your videos, as well as my two young sons, and to say thank you for your service to our country sir! Happy 4th of july.

That was amazing you caught that on video , good work !

was about to say that centre plate went in wrong a tooth missed.... was thinking hmmm maybe it was me and is meant to be like that even though others wern't.... Thank you for another lovely video Warren. Hope you and your family are all safe and well :)

thanks, great video, really appreciate when pro's post there is so much junk on here

Glad your makingvideos again and that ur upright and not layed up going stir crazy,happy 4th

hello warren , hope you are doing good buddy , love your videos , keep up the great work and happy 4th of july . terry in ireland , huge fan .

Love the videos warren! Cheers from Florida. Stay safe out there.

man! U R perfect mechanic, U repair everything from car, truck tractor...

i know some guys like you but i dont know anybody that can work on so many different brands of equipment and keep all that shit in his head i could watch you all day

Good video Warren. Happy 4th of July to you.

You told us beforehand and I still had to rewind twice to see the tooth being off!!

thanks for sharing your day.

You must have good forearms lifting that big Milwaukee gun all day long, they’re big bastards! One of my colleagues has one, they’re an awesome piece of kit.

Thanks for sharing bud Happy 4th !

Enjoyed your video. Thanks for sharing.

mess ups happen. did a repair on a case2470 exhaust valve broke off fell into cylinder #4 directly under turbo smashed up piston/jug. when parts came was already late with spring fieldwork did assembly well into the night it was finally time to start it. it W O U L D N O T fire up! cursing throwing tools across the shop cursing more cursing 20 minutes later i walked over to the work bench to catch my breath and then i saw them...............pushrods

Yes, that’s why you are a master at your craft you see your screwup’s, and you hit them head on🤘🏼🇺🇸‼️

5:13 is that One lonely farmer lost again

hi mate,look like two men job.not easy,great job.well done.

Got the notice and ran to the pc!!

Happy 4th to you and your family thanks..........

lol ya i saw it when you did it... good catch!!!

Happy 4th Warren!

Nice, needed my daily dose!

Good job

Great video, Warren. Thank you! I am wondering if there is a way to put some puller equipment on the truck and also possibly a pneumatic or mechanical press.

Cowboy THANK YOU FOR THE VIDEO good work my skilled KZfaq teacher/ friend

its funny how you can make mistakes like that, I know it from my self, but then watching the video it is so easy to catch. Always gotta check twice

Where did all the little pieces go that were broken off? Thanks for your videos. Been looking for an experienced backhoe down here that someone left behind, that needs some fixing, just hard to finding parts for a 1980 dynahoe.

Wet brakes are a pain, Case used to sell a friction improver to add to the oil but it did not work well.Also these are Italian engineered (Carrearo)say no more!

I noticed they drive a lot slower past your shop! I thing you got them scared!😁

At 28:15 was it fixed? At 26:42 I seen the one tooth out but at 28:15 it looked fixed???

I can come in from walking my dog and glimpse your hands and know warren is hard at work. Being over 70 by a margin, I don't have to slave like I did, but I still like to fix stuff. A little more difficult because not as strong and hands cut easy. Stung twice by my honey bees early july 4th so still busy.

I wonder if you could put a remote start on your remote control for Your crane so that way you don’t have to get into your truck and out of your truck every time you start and stop your motor/engine

Looks like they repurposed a length of old grain auger for the shaft.

Good catch on the tooth offset Warren! Good videos.

Hello just wondering , in one of your other videos you mentioned you made a trolley jack stand to support the transaxle assembly of a 7930 or 7830, I would like to see what you put together I have a 7920 that's my own that I've got to pull the trans axle out of and wondered how you built yours, I've seen pics of deere's stand just wondered what you had?

Good

Happy 4th of July.

How did we live without battery tools and only slotted screws? Must have been a simpler life.

Ran 580 on pipeline more power of them all

Please excuse my ignorance. What are the auger like things for?. Do they move the oil through the axle?. Great vid as always.

I would like to know why he don’t have any help Good video

I was always taught, if it's a "clicker", back them off all the time, they all have springs in them. As you said, you'll weaken the spring and cause it to lose it's accuracy. It's the digital's, you shouldn't have any issues with those. At least you're honest and willing to show your mistake(s). Many folks don't or rather, won't. I'd prefer to see the mistakes and learn than not see them and not learn. We all make mistakes, that's just being human. Another excellent video as always. Is that a special grease you use for the "O" rings or just a regular type? I was taught to never put grease on them, just a slight coating of oil. Cheers :)

Is the 580k process similar? My father passed away a few years ago and he had a lot more experience working on big equipment so I'm a little hesitant to tackle it myself. The one that I have the pedals just fall to the floor and won't build up pressure. The master cylinders were replaced because my uncle put actual brake fluid in them but I'm wondering if some of the brake fluid got to the slave cylinders and ruined them. Case is telling me between $8k to $10k to repair it but I don't have that kind of money currently.

Love your videos . Me and my brother booth run service trucks and we always talking about the stuff you do . What Milwaukee 1/2 inch gun do you use . Switching everything from snap-on.

i saw it when you put it in. i'm done things myself. how did i do that

How much are you selling your old service truck for?

Can you provide me the thickness of center late and side pates

What is that spray you put on the discs?

Hi Warren, Don't say much on your videos but I'm addicted to watching you work. I've sent you a couple of friend request on Face Book but no response. Are you still on? Very much enjoy videos!! Keep them coming!!!!.

this guy is the god dam man ……………………………………………………………………..

How’s the back doing? You seem to be moving ok 👍🏴󠁧󠁢󠁳󠁣󠁴󠁿

Hey man did you feel that last one ? 7.1 in Ridgecrest about 1.5 hrs from my house good one splashed the water out of my in ground pool yeeha!!!!

Saw it.. offset counterclockwise 1 tooth, lol. Funny thing is if you're gonna design a wet motorcycle clutch as a brake, why wouldn't you make it as "idiot proof" as a bike clutch? Rather than little fangs, a big ol' buck tooth that won't assemble any way but "right", and would be a damned sight harder to shear off

did you sell the old service truck,cheers jim

People have really asked about why you back off your tork wrench?

geting parts mist be a nightmare

Hi Warren I am glad I didn't own that money pit of a backhoe when I started in buisness the dam thing would have bust me

you need to get the one inch miwakee inpack

I really admire a KZfaq Creator that is honest about their mistakes- we're all imperfect Creatures; Our best deeds- are but filthy rags, compared to The Lord. Isaiah 64:6

I think your videos are better when you have your GoPro on you head can see what your working on just my opinion

Was you near earthquake ?

Your days must be cool yet tiring if youre going to upload a 50 to an 1 hr video of you working on stuff.