Man, a modern top drive rig makes the job easy, lot better than old rotary rigs!

This is the most laid back casing job I've ever seen!

pretty nice gear. i like the way they remove the thread protector by using a stablizer

I love his cute little sippy-cup in the beginning!

This is why I loved roughnecking see something new all the time!!!! I like this ain't like i did it back in the 70s and 80s!!😅😅😅😅😅😅😅

Woooww!!! Really smooth operation roughnecks 💪 Smart Set up a tool on topdrive to torque and unscrew the casing lifter. Avoiding all hazards with equipment and tongs. I imagine only the backup tongs at first to run a few... Great job, I really miss all that action offshore after 25 years

I was on a domestic water crew almost 20 years ago. Rotary drill from the 80s lol Still got all fingers.

That’s what nubbins do. Made some for NOV a few years ago.

One of the biggest pos rigs I’ve ever been on.

Cada equipo de perforacion tiene sus pro y sus contras, este equipo tiene su principal caracteristica que empuja hacia abajo, puede conectar y circular en caso de un puente...el exito de la perforacion es aterrizar el csg. Circular y cementar....

Boyyy I would request every job if I ran casing like this! Easy money

On surface casing we used an endless rope to rotate casing screwing it together.

there are many comments on this operation: 1-why not using the API Casing thread compound before making up connections!! 2-you have not to remove the thread protectors from the pin threads until catching the casing joints into the rig floor to keep threads from the shocks 3-avoid spinning the joints fast for connection to avoid thread burning due to high rotation speed . 4-using safety clamps in case of slips failure. 5-I was wondering to how much weight limit this 2"link can hold and how he can know if he reached the optimum torque limit, no one say through the martin dicker :) :)

Man things sure change fast with those iron roughnecks. I broke out on a Cardwell which was like beautiful dancing and got out on a National which was like getting beat up for a days work.

I used to manually spin nubins into some 68-72 30-footer, 9&5/8ths inch surface casing joints. Forearms would be on fire and cramping after that

Funny that with all this technology, you still just needed a long nail and a crescent wrench to attach a stabilizer to the tool joint of a casing string . We had a box of nails on my tri-plex pumps to take care of a pop off. You rarely know why it pressured up at that time.Pump pressure ? liner needed to be replaced? Flow line was plugged up? The intake of the pit(suction) end was plugged? And those are surface incidents. I could go on with downhole problems as well but we would be here all night

My gosh they have so much easier these days. We used to hafta man handle every bit if that. I mean we had strongest fearless guy in the Derek to handle that big casing pipe. Man I need to go back to doing with it like this

Holy shit automatic slips

This is not the way I used to run casing in the 80's.... sure it's way safer, but we never had accidents running casing, but good Lord it's slow! Why do they need two men on the floor to run it this way? It's easily a one man job! No pulling slips, no wedding band clamps etc... Geesh... roughnecks sure got it easy these days!

back up about 25 years way more fun!! this looks like watching a 100% hyd unit running casing!!

Shit water well drilling isn't even this easy. 🤣🤣

On a small coring rig we just use the winch and screw them using chain wrenches, a lot harder than this but we dont go as deep, still this is a lot easier

That's not the way we ran it when I was in the oilfield. That's lame.

Super slant with a pipe arm haha I miss those little rigs

Got to be the worst job ever, just standing there waiting, 17k feet of casing ran in only 56hrs.....impressive

I wish I could have run casing this way. Looks so much easier.

Those are called centrilizers, not nubbins. When I roughnecked we threw most of those in the reserve pit.

I remember chain tonging 40 or so of those in a night

How much is hook load under that pin??

It's still a dangerous job. It's the oilfield anything can happen in a blink of an eye.

Great casing couplings Great staff

hardest part of this job is getting out of bed to go to site

Very nice work

En un equipo similar estuve trabajando con la compañia Foxxe de E.U. en Mexico

super safe that's why i don't like it takes longer ... I like to work to hard for how slow this process is ... (Now days ) here in Pennsylvania though the safest company wins .... it goes on there report card if any body gets hurt slamming in casing because some person bitched about a pinched finger

Bom trabalho do mar voce aprende muita coisa.

Called technology

Good jobs l was workings and really so glad

Even my 10yrs old brother can do this

At 1:32 ..put that keeper in that pin. That iron doesn't care how bad you think you are.

Incrível muito bem👍👍👏👏👏👏

Had to give this vid a like. Nice. Is that the regular drilling crew? That would explain the extra man. A casing crew would use one less man on the floor.

All about no touch running. Safety first.

Where's the stabber...? Lol.... In the dustbin of history I bet...

Gördüğüm kadarıyla erkek dişli, taşıma tıpasını takmak çok uğraştırıyor ve yoruyor. Hidrolik bir aparat tasarlanamaz mı?

The weight of all that casing only holding by buttress threading when going into the hold..what's the reading on the Martin Decker..one casing 47ppf if is 9 5/8....67ppf if is 13 3/8🤔🤫

Indonesia 🇲🇨

I heard they are still running this casing today on the same well......

Kinda slow, I run 9.625" casing Vam Top 38 joints and hour offshore on the Brent Delta in 1998 using a Weatherford lamb tong. Could also use a small table to place nubbin on, cuts out all that bending. Anyway nice video.

those caps gotta way at least 180 pounds

That aint no rig..i rather work my ass off than stand around waiting on that robot shit to make a connection

It's been awhile since I've been on a rig .. but , one pipe at a time ?? Small type rigs ??

В конце все испортили поставили центратор на муфту, что нельзя делать!!!

good job

Use top drive, and cds..all done

这个工具最大能挂多少吨悬重？

Thanks for posting... very clear video, got to see all operations going on... even the 'beep beep beep' loader. Question... which part is the 'nubbin'?

Wow they make it to bottom yet

شكرا

what's keeping that lift pin from coming out

So you don't need a derrickman and roughnecks huh? Wonders of technology

When does the roughnecking start boss.

Is this Disney Land?

I could do that for 15 hours no problem. Where do i sign up?

Обсаживают скважину заглушенными трубами? Фонтана не боятся?

What is the maximum torque??? It looks like not enough torque is being aplied

Now understood why so many dies in these jobs. Very dangerous. Death hazard!!

Wheres the safety pin

Whatttt jobbb

Never seen casing run this way. It seems terribly boring, I’d rather work with a spider and tongs honestly. At least then there’s something to do.

Where is the dope?

Another one of those drilling rigs that is way over engineered.

No cotter pin?

That would be a long day. Thought casing was slow enuf till I saw this. Rather be drilling top hole

Hate to be anywhere near when a hydraulic line bursts.

Why you don't use a powertool to screw the big plug on the pipes ? 6:35

That's alright there,I'm just wondering what the cost of that tool is and it's operating cost is vs.that of cost of torque operation may be.as far as safety it seems good.

Dev Venkat, r u in?

What are all those long things ?

Can I get work in this...if yes How can I apply ?

Might look easy but extremely dangerous

great

Je m'appelle Benjamin kambila moi aussi je suis un opérateur drilling ça me Terence pas que c'est moi métier, Mr le directeur général ,ci il y a des possibilités d'arriver au votre société je suis prêt, j'ai 14 ans de espérance 🇨🇩 je suis congolais, Donnés moi la chance

🤩👍👍

OMG how things have changed

Is that little 2" pin holding all the casing? Water well drilling is harder than this... i'sant it?

This is Predator rig atlascopco .

No safety pin in casing nubin. .

Deep well

Hi every one I hope you're all fine .who can help me I am fresh graduated petroleum engineering technology. I need internships or job any job oil and gas company

What is the weight of the string of casing pipe that must be lifted and held by the machinery?

Is this a slide operation?

I also want to work with you.

Damn they are slow.

What in the hell is this?

How many feet or meter

هذا العمل ياخر ياخذ وقت كلش هواي

05:25 what is he doing?

Нипель пластиковый?

Were is this at? What company