Servicing the PENN Slammer 4! Teardown & Assembly

Рет қаралды 7,889

Жыл бұрын

#fishing #fishingreels #saltwaterfishing
In this video I breakdown how to teardown and assemble your Penn Slammer 4 and Slammer 4DX for potential service and repair.
Music:
Source - www.epidemicsound.com
Artist 1 - ELFL
Song 1 - Alienated
Artist 2 - Jay Winters
Song 2 - All Will Pass
Artist 3 - Ooyy
Song 3 - Above the pink clouds
Clipart - www.canva.com

Пікірлер: 26

@roberthoy8514 Ай бұрын

Thank you for a teriffic servicing video. I have just serviced my Slammer 4 after watching this and it helped immensely.

@The_Reel_Tech Жыл бұрын

I have been servicing reels professionally for a long time. The video is great in assisting reel owners to be able to give their reel some TLC in the event it went swimming or just to look after it. Two things I'd change here.. 1. ALWAYS remove all those bearings from their recesses, that is the first point of ingress and factory lube job is piss poor at best. Once the salt gets to work between the stainless bearing and aluminum body you get galvanic corrosion and getting those bearings out, especially the Pinion Assembly can be a major issue. I always pull all bearings and grease the recesses. 2. No issue with generous grease application but I always remove old grease even if new from factory. I would also not use different grease/lube products as the cross contamination could cause the lubricants to be less effective through breakdown of key composition/formula. Got yourself a new sub as I enjoy all content around these topics. Keep up the great work.

@CastFromTheHip Жыл бұрын

Thanks for providing the feedback and subbing. That’s all great info and I appreciate people sharing their wisdom. I’ll keep it in mind for future videos!

@bladengutz2042 2 ай бұрын

The beer tin gone make the reel Drunk 😂

@FRECUENSIAX 7 ай бұрын

Thank you very much for the video, it has helped me a lot 😎🤙 greetings from Puerto Rico

@TimberrlandOutdoors 7 ай бұрын

Great !

@roy1m664 9 ай бұрын

Thanks for sharing! Just subbed! Awesome video!

@NASPELTZ Жыл бұрын

Great stuff

@CastFromTheHip Жыл бұрын

Thanks!

@maasai- 7 ай бұрын

Thank u so much , my future reference

@lamthanhho Ай бұрын

I need my penn slammer 4 serviced!

@BroskiArmy23 Жыл бұрын

Stop keeping up waiting, we are hungry for new video!! 😂

@MisterSkeptic 9 ай бұрын

Great video. I didn't realise my Penn Slammer IV had so many parts 😞 The main gear on my reel sounds like it does not have enough grease - there is a sort of dry metal on metal sound. I would like to just remove the side plate from the body and apply some blue grease to the main gear and other cogs. When removing the side plate of the body, what type/size of screwdriver is required ? Is it a Philips or flat head ? Thanks.

@jonathanbadilla1804 Жыл бұрын

Hello, thanks for the video!!! I follow your videos which had help me a lot!. One question, I saw the Spool Click Plate with a little dent in the tip. (26:45) My Slammer 4 8500 has the same and I was wondering if that is normal or is damaged?. Thanks

@PicaNoPicaFishing 8 ай бұрын

I love the penn slammer 4 but the only things i dislike is that the line roller bearing isn't sealed 😅. I have 2 4500hs and I've replaced it once before but just curious if you know of any better replacement bearing for it. Great video Keep them coming 👍🏻

@stripervince1 6 ай бұрын

I believer the newer ones do have line roller bearings now

@MichaelJohnson-wd9qh 8 ай бұрын

Does the rotor nut control how easy the handle knob turns?

@DexterPalagiano Жыл бұрын

G'day, what are the two spare small plastic washers that come in the box used for?

@CastFromTheHip Жыл бұрын

Those should be for adjusting the lay of your line on the spool. The instructions in the box should explain those and whether you need them. Your line lay should be evenly distributed. More line up top and you need to add the washer to your main shaft under the spool. Too much line on the bottom of the spool, you need to remove the factory washer and add the spare only. Honestly, I’ve never used them.

@vitorgarcia9687 7 ай бұрын

What is the number of the Penn Pursuit 5000 anti-reverse?

@Nag.Nag. Жыл бұрын

🙋 🙋

@thevernonposse Жыл бұрын

Is the authority supposed to have that little plastic bushing in the pinion I took mine apart and didn't see one

@CastFromTheHip Жыл бұрын

Yes it should be there. Could’ve been missed at the factory.

@stripervince1 6 ай бұрын

Better idea, pay $25 to have it serviced. I never had a reel that needed servicing in 60 years of hard fishing almost daily. Rinse off and a squirt of wd40 all my reels ever need

@CastFromTheHip 4 ай бұрын

You ain’t wrong. Stopping any corrosion (via WD40) is 90% of the battle. I have kept reels alive indefinitely with WD40, but a deep clean makes them run better if ran real hard for a long time.