Casting Aluminum for the Home from a Simple 3D Print

Рет қаралды 1,455,589

2 жыл бұрын

Returning to the foundry, I cast an aluminum wall hook. The design of the hook had to take into consideration how it would be cast. Every face had to taper perfectly for the pattern to actually release from the mold!
If you are at all interested in my foundry and torch setup, please check out my website: www.grunblau.com
BTW... If you are a long-time subscriber, thank you! If you are new to the channel, welcome! (Be sure to also hit the bell notification or you might miss out on new content!)
Link for Black Licorice: amzn.to/2TCtzNN
(Brian Oltrogge is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com).
Music:
Cooper Ave by The Westerlies (intro)

Пікірлер: 2 000

@metalslug97 2 жыл бұрын

Christ man, you really didn't have to make an entire demonstration for why single-pull casted parts need tapering and drafting but the fact that you did just shows how incredible you are as a person. Cheers to that

@haddow777 2 жыл бұрын

I don't know. Those are the sorts of simple mistakes probably a majority of interested amateurs make and curse the heavens over. It's nice to have a video targeted to people nee to the idea of casting being given a solid practical explanation of just how important that step is.

@Grunblau 2 жыл бұрын

I learned from it. I was amazed at how hard the zero draft part was to get out. Too often I try to get away with zero draft and probably shouldn’t!

@umbeatable2770 2 жыл бұрын

@@Grunblau can i cast the same way but instead if aluminium with steel and titanium ?

@Dgafsranger 2 жыл бұрын

I'm new to all this I greatly appreciated it as much as I can learn before I try anything the better

@elguapo42 2 жыл бұрын

Love seeing people like this in the world makes me feelgood

@ashuri6476 2 жыл бұрын

Can we just take a moment to apprecate the incredible finish he got on his 3d print? Damn man thats CLEAN

@Cloakfiend Жыл бұрын

Its pretty standard. Depends on the quality of layer height.

@VentureWelding Жыл бұрын

I've seen prints that have a slight checkered texture. Must have been on a low quality setting.

@giedrius2149 Жыл бұрын

@@Cloakfiend It's pretty bad lmao

@bryansummers3219 Жыл бұрын

IKR? Now I know that a 3d print can be cleaned to that level of finish and how to do it. Thanks Brian!

@kevinburke8608 Жыл бұрын

@@bryansummers3219 When I first saw it after he put the glue on I thought. "ok that looks hacky as hell..." After he sanding it and put the finish on, I was thinking "OMG, that looks like something that came out of our finish room!" I haven't seen finish that good without slathering it in bondo and drowning it in paint. Wonder how well it holds up. I'm going to have to give it a shot now.

@HaloWolf102 11 ай бұрын

Did I just sit through a 11 minute video without checking my phone or getting distracted? I was completely engrossed. It's a phenomenal feeling having stable attention. Thanks!

@Grunblau 11 ай бұрын

Thank you! I miss my own ‘long form’ attention span…. Old KZfaq was best when it felt like we sat down to a meal. Today’s content feels more and more like I’m eating rice cakes. Tiny bit of flavor on top, but mostly just puffed air…

@pirateradioFPV 3 ай бұрын

It's because you weren't interrupted by the mid-rolls, ads, words from his sponsor and all the crap the scam boss running youtube makes you endure.

@NiChaos 22 күн бұрын

This guy is amazing. He managed to condensate TOO MUCH KNOWLEDGE in an 11 minutes video. The world need more people like you man! Thanks!!!

@AvengerDK 2 жыл бұрын

Your voice is fantastic. It's almost from a 50's nature documentary. Lookup "Alone in the wilderness".

@pa0letti 2 жыл бұрын

I thought the same thing. Love how you mixed the voiceover. Reminds me of vintage Disney nature films.

@nicklove8857 2 жыл бұрын

It sounds like speech to text software.

@anthonyhiscox 2 жыл бұрын

I always thought that was Dick Proenneke's voice but it's actually Bob Swerer's. I believe there are three documentaries around Dick and his cabin if you haven't seen them yet, they're worth a watch (I believe some stuff is reused but it's been a while so my memory might be failing me).

@anthonyhiscox 2 жыл бұрын

Excuse me, not his cabin, his cleverly stacked firewood pile. Building a cabin there is illegal.

@jonasandersson7367 2 жыл бұрын

Why would he? He was shurely in it

@Dailyfiver Жыл бұрын

I’ve been designing Sand Cast tooling for engine/brake parts professionally for 3 years, and I have to say you are absolutely spot on with all of your information and explanations. It’s really cool to see this done at home instead of with expensive mass production machines! Hahaha.

@Grunblau Жыл бұрын

Thank you! I think a lot of people will start looking into PLA investment casting. Much like my monkey video. This creates a very nice cast.

@DomFernandezMusic 2 жыл бұрын

I really don't think I'll ever get into metal casting, but if I ever do it is 100% because I stumbled upon this video. The whole process had me so drawn in and in awe. Keep this up!

@Grunblau 2 жыл бұрын

Thank you!

@paulotonetta8149 Жыл бұрын

@@Grunblau My friend... You finished cast wasn't smooth because you didn't press the sand... That's why!!! Got to tap it with a piece of wood while you put sand on the mold...

@Kameolontti Күн бұрын

There are a lot of metal casting videos as of late on KZfaq. This video is among the best based on a large sampling. Many people wish to make videos and appear as knowledgeable and they often give inferior and flawed instructions that will result in a lot of wasted effort and potential for long term flawed and erroneous methodology. This is a great video for 'small scale lost plastic 3D printed model metal casting' and offers good instructions and sound methodology.

@narendrasimha2557 2 жыл бұрын

Love the way you showed how easy or difficult it is to pull out the 3D model from the sand mold depending on it's shape. Please do more casting videos!

@Grunblau 2 жыл бұрын

I keep telling myself that I can get away with ignoring draft. This demo convinced me otherwise!

@yosyp5905 2 жыл бұрын

its*

@tedeby5351 2 жыл бұрын

@@Grunblau You can ignore draft if you go with investment casting.

@keithcress1335 2 жыл бұрын

Polycast is a 3D printing filament developed for investment casting.

@networkcrasher 2 жыл бұрын

@@Grunblau maaaaaybe now we can see how you finished up that domino box... hint hint

@woahnut 2 жыл бұрын

The black licorice really sold me with this video. I'm a big fan of black licorice and it's good to see another cultured soul.

@FloridaDIYer Жыл бұрын

I can't imagine how many hours that you and other KZfaqrs have saved the rest of us by sharing your knowledge of how to do things, and more importantly sometimes, how NOT to do things. . Also, your calm speaking voice lends itself to teaching. Great video.

@Grunblau Жыл бұрын

Thank you! I have been a university teacher on and off for the last years…

@kaasmeester5903 8 ай бұрын

11 Minute video, the complete process clearly demonstrated, including an explanation on the importance of draft. No wasted time. Outstanding!

@Grunblau 8 ай бұрын

Thanks. I try to keep things moving especially now when you have to compete with 10 second videos on Reels and Tik-Toc…

@macf4426 2 жыл бұрын

A Brian Oltrogge video in notifications is always welcome, but a Brian Oltrogge video with Aluminium casting, and a Drunk Octopus meme, really makes my day. Today is a good day 👍

@Kamal_AL-Hinai 2 жыл бұрын

Today is a good day to fight!

@acorgiwithacrown467 Жыл бұрын

I adore this format, the music, the voice, the jokes, the editing, everything. It feels so nostalgic, I remember watching those old tv documentary's on random stuff and falling asleep to the calming voice every single time.

@Grunblau Жыл бұрын

Thank you! I am glad you enjoyed it!

@KKoKoRR Жыл бұрын

I'm not interesting about casting aluminum or other things on this channel but I'm impressed this style. I came to make exactly this comment and saw yours. This video remind me old BBC educational VHS series.

@nunyabusiness9043NunyaBiz 2 жыл бұрын

What a great tip about using CA glue and THEN polyurethane. Previously I had commented the plastic version would suffice for me, and this would make that especially true, but also provides a great surface for casting in metal, of course. Great methodology.

@mathiasschneider9113 2 жыл бұрын

This is a great reference for 3d print-to-cast projects. Thanks a bunch for showing us this, and well done with that wall hook!

@nickhadfield3192 2 жыл бұрын

This is one of those channels that uploads rarely, but every time you do I go and watch a bunch of other stuff of yours. Looks awesome so far!

@zarblitz 2 жыл бұрын

Yeah haven't seen a video in years it feels like, but always stay subbed in case one comes along.

@ahmdabdallah5811 2 жыл бұрын

God has said in the Quran: { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 ) [He] who made for you the earth a bed [spread out] and the sky a ceiling and sent down from the sky, rain and brought forth thereby fruits as provision for you. So do not attribute to Allah equals while you know [that there is nothing similar to Him]. ( 2:22 ) And if you are in doubt about what We have sent down upon Our Servant [Muhammad], then produce a surah the like thereof and call upon your witnesses other than Allah, if you should be truthful. ( 2:23 ) But if you do not - and you will never be able to - then fear the Fire, whose fuel is men and stones, prepared for the disbelievers.( 2:24 ) And give good tidings to those who believe and do righteous deeds that they will have gardens [in Paradise] beneath which rivers flow. Whenever they are provided with a provision of fruit therefrom, they will say, "This is what we were provided with before." And it is given to them in likeness. And they will have therein purified spouses, and they will abide therein eternally. ( 2:25 ) Quran

@nickhadfield3192 2 жыл бұрын

@@ahmdabdallah5811 cool story bro. Needs more dragons.

@hasanelahituhin1150 Жыл бұрын

kzfaq.info/get/bejne/jamefK2mm5_FhmQ.html

@briansuxxx 2 жыл бұрын

Amazing job. This is one of the cleanest sand castings I've seen.

@aogle 2 жыл бұрын

Thanks, Brian for the easy-to-follow process. I'm now tempted to give casting a go.

@spurnd Жыл бұрын

Great narrator voice, reminds me of those old instructional film reels from the 50s or 60s.

@NautilusGuitars 2 жыл бұрын

Man, I hope you keep posting. You're the main reason I got into metal casting. I now make custom parts for the guitars I build thanks to you. Your videos are always a great inspiration.

@Grunblau 2 жыл бұрын

Glad to hear! Thank you for posting this…

@chrisnurse6430 2 жыл бұрын

Can we see your guitars/parts please 😍

@user-be9ey4jb3c 2 жыл бұрын

I play guitar i want to see your parts.

@l00kns33 Жыл бұрын

@@user-be9ey4jb3c Does that pickup line work well for you?

@user-be9ey4jb3c Жыл бұрын

@@l00kns33 what pickup line?

@Elviloh 2 жыл бұрын

Quality ! Thorough explanation while kept simple and relaxing. And a good hand sanding instead of using a machine, because sanding is an addictive activity for anyone who started. Love it !

@takinoff4271 2 жыл бұрын

All of the greatest designs are borrowed from nature. Love this.

@Smitty-op4ld Жыл бұрын

YESHUA GOD ALMIGHTY is perfect in engineering isn't HE?

@applepie9806 2 жыл бұрын

Niceee, I love that you showed everything in such a clear manner! :D That demonstration of the different cuts really made it easy for me to understand why your particular shape worked

@amberaerojack5800 2 жыл бұрын

I’ve been waiting for an upload which feels like years, don’t make that feel like a burden though every time you upload I am still so impressed. I’ve always loved the home made furnace, I’ve wanted one for years.

@GPEART1 2 жыл бұрын

I love the 1960's / 1970's sound of the voice over, nobody does that!

@goodmusic3679 2 жыл бұрын

I enjoy that the narration style reminds me of a 1960s instructional film. In a good way.

@Grunblau 2 жыл бұрын

Ha! Thanks…

Жыл бұрын

One of the best way to waste time/effort/material and energy, WELL DONE SIR.

@reggieasplund9081 2 жыл бұрын

I don't know how I ended up here, but thank you for this. In the 11 minutes of video, I was inspired by your setup, instructed by your narration, and awed by the results. Well done on easily some of the best casting work I've ever seen. Top quality content and work sir! Also, that hook is great.

@jedizero2 2 жыл бұрын

Loving the hungry snail. Great job as always Brian. Keep it up. You inspire me every time.

@mavos1211 2 жыл бұрын

This has literally made my week seeing this! Welcome back Brian you have been greatly missed!

@Washburnello 8 ай бұрын

Love that subtle Fifth Element reference with the match.

@Grunblau 8 ай бұрын

I am a meat popsicle…

@beliasphyre3497 2 жыл бұрын

I always thought of draft angles in relation to the normal of the parting plane. This just bent my mind and opened up a new world.

@Grunblau 2 жыл бұрын

That was the seed that sprouted this video!

@alexmoore5454 2 жыл бұрын

The fact you can explain the process in a concise easy to follow manner without all the fluff is really helpful and shows you know your stuff. Awsome video!

@Grunblau 2 жыл бұрын

I miss the Old KZfaq too! Thanks

@brardshepp 2 жыл бұрын

The clinical perfection with which you conduct your projects is admirable

@damag3plan 2 жыл бұрын

Good to see you appreciate the best licorice you can get 👍🇦🇺

@Grunblau 2 жыл бұрын

This is correct.

@ctrhenry 2 жыл бұрын

What a great surprise this morning!

@charickter 2 жыл бұрын

Indeed!

@joseppi4435 2 жыл бұрын

that's what the ATF said

@CASSDesigns 2 жыл бұрын

Awesome video! Definitely going to be using tips from this when I think of something to try as a first cast from a 3D print - thanks!

@andrewcooke8850 2 жыл бұрын

Nice to see a clean and tidy working practice. A good example of how things should be done 👌

@mathew00 2 жыл бұрын

I'm so happy you made another video. You are so talented and I greatly appreciate that you share your talents! 👍❤👍

@Vassenden_yt 2 жыл бұрын

It's like christmas x10 everytime you upload ❤

@themanhimself3 2 жыл бұрын

I've never seen the super glue and polyurethane trick used on 3D prints. It looks amazing, thank you for the tip.

@wayneshephard 2 жыл бұрын

Very patient fellow, that's a great result to a process I haven't seen used in workshops since I was a boy, brought back some fond memories of my dad, nice work

@Techischannel Жыл бұрын

What the Stellaris "Egalitarian" Advisor does in his free time:

@SeanHodgins 2 жыл бұрын

Your videos always remind me that I want to build a foundry, but never do it!

@Napkinholdin 2 жыл бұрын

If you sit on that fence long enough, grab one of those induction furnaces for like $700 - they are insane... :p

@SeanHodgins 2 жыл бұрын

@@Napkinholdin got a link? Or brand?

@Napkinholdin 2 жыл бұрын

@@SeanHodgins let me get back to you later today (like 12 hours) I have a link and some info from when I was searching. I ended up with a great piece of equipment and another KZfaqr explains how to easily switch it from a 120v to 240v if that sort of thing is needed.

@rodschmidt8952 2 жыл бұрын

Make a list of steps, and then do the first one

@KRGraphicsCG 2 жыл бұрын

I do as well, but legalities

@wea71 Жыл бұрын

This is how you do a maker video, you explain why and not just how. Thank you, Brian!

@Grunblau Жыл бұрын

I miss the old, long form KZfaq videos where most people spent more than a couple days on a project…

@atvheads Жыл бұрын

Wow, this is like watching a 60:th instruction video. The voice and text is perfect. And a interesting video.

@Grunblau Жыл бұрын

Thanks! Glad you enjoyed it!

@turkeybaconranch5385 2 жыл бұрын

it's refreshing to see a video made with so much care. Articulating every step along the way, such a rare thing on youtube.

@Grunblau 2 жыл бұрын

I also wish there were more ‘in depth’ channels on YT… I would rather see people post once a month than once a week, but KZfaq rewards more superficial content. Stay strong and resist and I will too!

@aaronramly1705 2 жыл бұрын

Welcome back Master !

@MeltAbilities 2 жыл бұрын

Yes 👏🏼… I ❤️ his videos. I know it’s a lot of work… and he probably has a day job… but I’d love to see more. Hey KZfaq… pay him more so he can quit the day job and focus on producing more content‼️ 😊

@joedanero5360 2 жыл бұрын

This

@ebaymagot 2 жыл бұрын

thanks for demonstration with undercuts. I have a project that I'm working on and I will have to revisit because of this tip.

@PrograError 2 жыл бұрын

btw it's the same idea for vacuum forming, slope make the day for removing that... tho it might not save it from going wonky due to the plastic..

@justinreedflynn 3 ай бұрын

This is always how I planned on doing casting, thank you for demonstrating!

@aliaslordcaine 3 ай бұрын

I can’t thank you enough for this video. I’ve been having no luck with green sand and the techniques you have share will lead me to success!

@Khether0001 2 жыл бұрын

Every time you release a new video I have an urge to binge watch your entire library again! You are in another level Brian, Congratulations! Also, you should do voice acting, you have an excellent narrator voice!

@inna.rudenko8571 2 жыл бұрын

studio.kzfaq.infoRMQfzPoPbx4/edit

@CraigsWorkshop 2 жыл бұрын

Fantastic to see you back! I was wondering where you had got to. Great casting result!

@samo4866 2 жыл бұрын

I love that your forge is made out of a keg. Definitely need to turn one into a forge.

@ericray7173 Жыл бұрын

The intro was a real throwback to late 60s manufacturing videos lol.

@minhavidavai Жыл бұрын

This video is so amazing. As a materials engineer, I had enjoyed every second of it.

@Grunblau Жыл бұрын

I am glad you liked it! You might find my monkey casting video a good time, too :)

@victorrzhang 2 жыл бұрын

The voiceover sounds like old documentaries, i love it!

@at3313 Жыл бұрын

Reminds me of some old how to video from decades ago, the music, the way he narrates and even how his narration sounds all make me feel like this is from an early 90s pbs show

@Grunblau Жыл бұрын

Thank you!

@ronnetgrazer362 2 жыл бұрын

What an incredibly well made instruction video! As others have already commented, the narration was quite enjoyable, in a retro kind of way. Thanks for helping me realize that I definitely need a 5 axis CNC.

@Grunblau 2 жыл бұрын

Thank you for your comments! I try to make the subject as approachable as possible…

@inventwiz 2 жыл бұрын

I normally can’t endure more than a minute of most how-to-clips but, this one was enjoyable, highly informative and covered all the bases. Thanks for posting!

@Grunblau 2 жыл бұрын

You bet! Hope you come back and check out some of my other videos!

@sebianoti 2 жыл бұрын

I see a new video from Brian, I drop everything I'm doing to watch

@Grunblau 2 жыл бұрын

Is there a time that would work best for you? :)

@sebianoti 2 жыл бұрын

@@Grunblau anytime is perfect time 😄

@The.Talent 2 жыл бұрын

One of the two channels that I have notifications set for. The other is This Old Tony.

@jimanddeb 2 жыл бұрын

@@Grunblau Every day ;). Welcome back

@nixie2462 2 жыл бұрын

@@The.Talent exactly.

@fredtorres1703 Жыл бұрын

Can't give you enough thumbs up! Thank you. Your craftsmanship is apreciated.

@Grunblau Жыл бұрын

Thank you very much for your comment!

@jaredthomas8289 2 жыл бұрын

So glad you're back Brian.

@MindMeetMaker 2 жыл бұрын

The finish is always amazing Posh Work again dude 👌

@wulk0r 2 жыл бұрын

this is content making at the finest. everything is well planed and executed. thank you for sharing your skills

@inna.rudenko8571 2 жыл бұрын

studio.kzfaq.infoRMQfzPoPbx4/edit

@erniebahr4666 2 жыл бұрын

I will second the comments of many others here. It is great to see a new video from you. Your work has inspired me for many years. Thank you for taking the time to make and post this video. :)

@Mr.Neko013 2 жыл бұрын

Your narration sound like an old instructional video and I love it!. I also love the idea of casting from a 3D print

@PetterBruland Жыл бұрын

Very nice! Did not think about the CA glue and Poly urethane trick, I'll have to test that out as your part almost looked vacuum molded. Thanks!

@Grunblau Жыл бұрын

Thanks! Learned that from a pen turner…. I was amazed at how nice the finish ended up!

@Rouverius 2 жыл бұрын

That is the most beautiful hungry snail I've ever seen.

@PapayaPositive 2 ай бұрын

Ok, NOW I want to get into 3d printing. Not before watching this video, but after watching this video. 🤩

@recreative3619 Жыл бұрын

Wow i literally watched my first video about this and learned enough to go start my own projects! Thank you for this very good and informative video👍🏾

@salty3958 2 жыл бұрын

Forgive me if someone else has already commented this, but depending on the material you 3D print with you can use acetone to smooth the surface instead of doing all that sanding. For parts such as this where it's mainly aesthetic and there's no real tolerances required, it would be ideal and save you a fair bit of time. Nice work!

@TAH3DGeek1994 2 жыл бұрын

I 3D print and can confirm that acetone washing can be used on ABS but that’s about it in my personal experience. It’s just as easy to print with PLA and do a resin wash over the print with little sanding at the end.

@TomSullivanify 2 жыл бұрын

You can also use plb and isopropyl alcohol

@rainydaytoast1490 2 жыл бұрын

@@TAH3DGeek1994 can you please do a video detailing more specifically how you get such smooth prints!

@TAH3DGeek1994 2 жыл бұрын

@@rainydaytoast1490 I plan on doing it eventually and starting another channel solely for it but I can’t at the moment as I have a very busy home life. Once I have some more time to spare it’s something that will be done. For now I would recommend visiting uncle jessy on here as he has some amazing videos on it

@GerManBearPig 2 жыл бұрын

The smoothing is pretty pointless in this case ... the metal parts need be finished anyways and it won't make a huge difference removing the plastic from the mold

@glmorten Жыл бұрын

"You see that coat hanger there, I made that." People are going to look at you like you are crazy lol.

@tonygagey 2 жыл бұрын

so glad to see your excellent work back on youtube.

@hawaiianryan1890 2 жыл бұрын

Thanks for pointing me to The Westerlies. 🎼

@Bennett5363 2 жыл бұрын

I can never look at those coat hooks in the same way again.

@hydroknight01 2 жыл бұрын

I've missed the hell out of your videos, man...

@wickedcityracer 2 жыл бұрын

wow, that was a beautiful casting,and a fantastic hand finish.

@KK4CNM 2 жыл бұрын

I like the trick you did with the audio it reminds me of those old videos we watched in school.

@hellomate7681 2 жыл бұрын

Timestamp: 0:15 introduces 0:40 making pattern 2:10 mold principles 3:20 mold material 3:35 making mold pattern 4:40 upper mold after hours 5:00 flipped mold after hours 5:15 adding part bottom mold 5:33 bottom mold next morning 5:40 releasing mold pattern 6:00 adding runner mold spruce 6:35 starting casting furnace 7:05 adding crucible material 7:45 adding material to mold 7:55 mold after night 8:05 releasing mold casting 8:35 releasing mold runner 8:43 smoothing casting surfaces 9:50 making mount template 10:07 adding template aluminium 10:35 placing aluminium mount 10:45 final product aluminium casting I hope this would helping. :-)

@fredio54 2 жыл бұрын

I'm sure you're not the first, but using a stainless steel beer keg for the outside of your furnace was a GREAT idea :-D

@romainc2659 Жыл бұрын

Oh my goood it's been forever since I saw that "drunk octopus wants to fight" image! I remember taking a picture of one I found in a restaurant more than 10 year ago

@x1101126 Жыл бұрын

A lot of sanding, a lot of dust, a lot of hard work. Well done.

@Grunblau Жыл бұрын

Thanks!

@StJohnny22 2 жыл бұрын

Fantastic! I started building a forge after your video of it and never got around to finishing it. You may have inspired me finish now. ..."Hungry snail wants a cracker." Not gonna lie, a little bit of coffee came out my nose. Lol

@ShaneGadsby 2 жыл бұрын

2:06 Wow, I wasn't aware that Darrell Lea was available outside Australia! It's always seriously tasty (Dark Choc. Licorice Bullets are my fav!)

@Grunblau 2 жыл бұрын

*Opens Amazon browser window*

@kymlardnerofficial 2 жыл бұрын

But is it made in Australia ?

@ShaneGadsby 2 жыл бұрын

@@kymlardnerofficial it sure is! I'm not sure what percentage of ingredients are Australian, but they're still manufactured in Sydney at least.

@Celtic_Thylacine 2 жыл бұрын

A visit to Darrell Lea was a must any I time I went to the city in Melbourne as a kid.

@bosshogzz 2 жыл бұрын

As much as I try, this man is better than me. I will always watch his ilk. I’m glad you are back!

@NAANsoft 9 ай бұрын

There is something about your voice and speak that reminds me of infomercials from the '60s. It brings authority, so it is quite nice. Great video, by the way!

@Grunblau 9 ай бұрын

Thank you! Only explanation I have is “midwestern dialect”. I think the Midwest had more to do with US culture in the 50-60’s so more of the information and media came from here.

@tobymdev 2 жыл бұрын

damn so much work for a coat hanger.

@ilikecringe Жыл бұрын

Yeah lol but good for learning

@kevinm3751 2 жыл бұрын

Here is a tip for you, instead of using super glue to generate a smooth surface on the 3D printed part, use UV light curing resin instead. It makes for a super smooth finish that only needs light sanding and produces an extremely nice finish that wont transfer artifacts.

@alejandroperez5368 2 жыл бұрын

You're ignoring the fact that what produced those artifacts is not the 3D printed part, but the sand.

@alx252 2 жыл бұрын

@@alejandroperez5368 ... 1:13 ...

@ArnaudMEURET 2 жыл бұрын

@@alejandroperez5368 he’s talking of the printing artefacts. Which the CA glue is meant to smooth. Not the casting artefacts.

@jimmyog Жыл бұрын

@@alejandroperez5368 you ignored the fact that he had to smooth the 3D part to get a smooth surface within his mould

@jaytaylor6857 2 жыл бұрын

Dude!!!!!! So glad you are back posting! I have truly missed your videos! Please dot stop! Legend!!!

@SR-dm5lh 2 жыл бұрын

it's like a voice from the 60's.. 🙂 Great work!

@astroknott5877 2 жыл бұрын

I think I would have just used the printed part. But to each his own. Good video in any case.

@mikemorrison377 2 жыл бұрын

The aluminum is beautiful, but I agree, the 3d printed part was also very nice once he filled with ca glue, sanded and applied the finish. I learned a. Nice way to finish off some 3d printed parts!

@JacobInzerillo 2 жыл бұрын

@@mikemorrison377 could have hit it with some "aluminum" spray paint and a coat of clear and had a very nice product in less time

@RobertMilesAI 2 жыл бұрын

Beautiful work! But man, it only has to hold up coats, so the 3d print is plenty strong enough, and looks great after the CA and polyurethane. I would have just gone with that and saved time :P

@Grunblau 2 жыл бұрын

I might post the 3D model on the website with a modified back for just that reason…

@stephen_himself 2 жыл бұрын

So incredibly glad you’re back to making content! Please, pretty please, keep it coming 😊

@Grunblau 2 жыл бұрын

I have a few more that are getting close!

@guimandarin 2 жыл бұрын

Awesome. How can someone dislike this? What is there to dislike? Really professional work, and great video.

@AGeekNamedRoss 2 жыл бұрын

"The hungry snail"? no "Slurms McKinsey"? Yes

@bennylloyd-willner9667 2 жыл бұрын

I thought "Designer Women's Shoe Heel"

@jacob79001 Жыл бұрын

I know it seems over the top. But just think of all the time and money he saved from not just buying one...

@karlsinger4760 2 жыл бұрын

You work very cleanly. I appreciate that

@TheRealStructurer 2 жыл бұрын

KZfaq have insisted for quite some time that I should watch this video, and boy and I glad I did! Learned a lot and got curious about how create your voice, it’s great! So is your hook!