No video

Fusion 360 Tutorial - Parametric Modeling for Cabinet Drawers | Woodworking

  Рет қаралды 6,396

Casual Builds

Casual Builds

Күн бұрын

Access to this file is on my Patreon: www.patreon.com/casualbuilds
Original Fusion 360 video: • Why Fusion 360 is Awes...
In this video, we dive deeper into parametric modeling with Fusion 360. I'm designing a cabinet base, but the trick is using parameters to automatically create the total number of drawers & adjust the height of each drawer as well. It's a cool feature, could be super helpful when modeling out cabinets (or can really be used for anything). If you have any questions, drop them in the comments or head over to my Patreon page.
Chapters:
0:00 - Intro
0:57 - Building out all the parameters
4:37 - Creating the sketch
10:33 - New Patreon for Casual Builds
11:36 - Extruding sketch & making it 3D
18:20 - Duplicating drawers with pattern
22:20 - Formula for drawer height
#fusion360 #3dmodeling #woodworking
---
⚒️ My Tools & Equipment - casualbuilds.c...
🪑 Casual Woodworking Plans: casualbuilds.c...
📸 Instagram: / casualbuilds
👥 Facebook: / casualbuilds
🌐 Website: www.casualbuil...

Пікірлер: 30
@pokiejackson3364
@pokiejackson3364 6 күн бұрын
You need to get a Space Mouse brother. Great video! Very helpful and simultaneously entertaining.
@bobcarolegardner
@bobcarolegardner 2 ай бұрын
Components are the building blocks that make up assemblies, and a body is one of the elements that make up a component. Each component contains one or more bodies, as well as its own set of origin planes, sketches, construction geometry, joints, and other elements. (From Fusion 360 help)
@davidalan6701
@davidalan6701 5 ай бұрын
This has been the most helpful explanation of how to use parameters for models. Thanks for doing this.
@CasualBuilds
@CasualBuilds 5 ай бұрын
I appreciate that!
@cryogene
@cryogene 3 ай бұрын
Many thanks Tim for putting this out. Happy you made a part 2 from your initial video on this subject, I was pulling my hair out trying to figure out these equations. And now thanks to your vid, I created a "base" default cabinet model that I'll use for every cabinet build going forward. Working as I write this on doing something similar with the drawer faces.
@GGGG_3333
@GGGG_3333 5 ай бұрын
I have to add one more thing, I love your Patreon tier naming convention 🙂.
@CasualBuilds
@CasualBuilds 5 ай бұрын
thank you! I thought it was clever, haha
@rsrondini
@rsrondini 12 күн бұрын
This was unbelievably helpful! Thank you! Any plans for instructions on how to include drawer faces?
@GGGG_3333
@GGGG_3333 5 ай бұрын
A full series on using fusion for woodworking would be amazing 😍
@CasualBuilds
@CasualBuilds 5 ай бұрын
I’m gonna have to do a lot more learning for that. You should check out @Iliketomakestuff - Bob has a phenomenal course on Fustion 360
@GGGG_3333
@GGGG_3333 5 ай бұрын
@@CasualBuilds thanks for the suggestion 🙏. I checked his channel but couldn't find it anywhere. I am actually a subscriber to his channel as well 😅.
@CasualBuilds
@CasualBuilds 5 ай бұрын
fusion360formakers.com/
@GGGG_3333
@GGGG_3333 5 ай бұрын
@@CasualBuilds ❤️. Unfortunately it's too expensive for me at the moment, but one day 🙂
@kesterbelgrove818
@kesterbelgrove818 Ай бұрын
Thank you so much really. I need to build drawer for my office and did not know how to build to begin, then I did not even know how to draw it up in Fusion360 for wood working. You not only showed me how but how to make quick changes. I thank you so much. Now I'm gonna be able to build my own drawer and all I need to do is change the parameters for it to match exactly what I need.
@richardswartz4273
@richardswartz4273 5 ай бұрын
Your parametrics helped me a lot. Next step would be to add parametric drawer fronts. Do you have any recommendations on that? I’m stuck on that part. It would be nice to maintain a gap all the way around the drawers and edges of the box. I’ve messed around with lots of tutorials and a decent mix of yours and others. I’m not good at wood working so cnc makes it easy as I’m a cnc machinist. But generally do one off stuff that are all vastly different. This repetitive work with slightly different options and to not break the model is something else! I added a box joint extension and that alone will help me a lot. Looking for strong ikea cabinet’s essentially. Right now is a bank of drawers to slip in the already built shelves in the garage. And I’d like a variety of drawer depths. The organizer inserts I may do separately. That’s a little over my head right now for the parameters on that.
@TheCreepzor
@TheCreepzor 2 ай бұрын
Hey, you draw the front on the 1st sketch relative to cabinet widht and drawer height, it should work with this type of construction.
@paramtrx9558
@paramtrx9558 4 ай бұрын
Thanks! That was very informative and perfectly timed..
@CasualBuilds
@CasualBuilds 4 ай бұрын
Glad you found it valuable!
@alessandro4337
@alessandro4337 Ай бұрын
Nice, i would suggest creating a new component for each part of the cabinet. For example, components would look like: CarcassSide, CarcassTopBot, DrawerSide, etc... you have more capabilities of modeling when creating a component for each part. Every one has their own ways but this is what i know to be best practice.
@bobcarolegardner
@bobcarolegardner 2 ай бұрын
Sketch shown does not appear to be fully defined/constrained (blue lines in sketch). Also could save time using constraints.
@kdunmoodie
@kdunmoodie Ай бұрын
Love this video... shout out from the Panama Canal. Question: how can we include the drawer face plate?
@GGGG_3333
@GGGG_3333 5 ай бұрын
With regard to bodies and components question you asked. To my understanding is that it would be useful if you were planning to add some joints, basically to create a joint you would have to have 2 different components. To my understanding it will also help if you were planning on creating a cut list, if I understood it correctly, when you have different parts of your build as different components they will be displayed separately on the cut list. I am still just learning, so everything I said is to be taken with a huge grain of salt 😅.
@CasualBuilds
@CasualBuilds 5 ай бұрын
Very true! Thanks for the explanation!
@jahtibacollins9454
@jahtibacollins9454 4 ай бұрын
I am also still learning fusion for designing my dream workbench. Foureyes [kzfaq.info/get/bejne/j6xjjNKTl9-yn3k.htmlsi=FQI0mRaSQeiyl-nF] has a great video on creating a cabinet with sliding doors and helped me understand bodies vs. components a bit more. I am creating mortise and tenon joints out of plywood like Paoson Woodworking's epic Dewalt saw bench build. From there I am organizing those three extruded bodies pressed together into separate components. To my understanding, it's like organizing all the files necessary for each part into its own containing folder. I still have yet to see if that affects the cut list however.
@RockGodZeppelin
@RockGodZeppelin Ай бұрын
I use fusion for cabinet making profesionally and I use the built in nesting for the manufacturing side. Fusion requires you to have everything you want cut as set to a component. From what I gather, a body feels more like a "digital" term. I will say, after making the switch to orginizing everything into sub assemblys it makes navigation much easier. Also when I model evrything I model everything by bodies and then just convert them to a component after I have finished with detailing.
@Martin_Macko
@Martin_Macko 4 ай бұрын
useful video - but 🙂 - why are side panels on bottom panel and no on sides ? - why you use bodies and no components? - extrude of back panel of drawer - can be done in IMHO better way - starting plane should by back plane of drawer side - and distance as "minus drawer plywood thickness"
@bobcarolegardner
@bobcarolegardner 2 ай бұрын
Ok, you fixed it.
@kirak1986
@kirak1986 3 күн бұрын
understood nothing watching this tutorial basically, may be my level of understanding is lower. or whatever. but i feel tutorial is not for beginner level
Why Fusion 360 is Awesome for WOODWORKING!
13:13
Casual Builds
Рет қаралды 80 М.
Schoolboy - Часть 2
00:12
⚡️КАН АНДРЕЙ⚡️
Рет қаралды 17 МЛН
Look at two different videos 😁 @karina-kola
00:11
Andrey Grechka
Рет қаралды 13 МЛН
Pool Bed Prank By My Grandpa 😂 #funny
00:47
SKITS
Рет қаралды 18 МЛН
Sketch Constraints Made Easy in Autodesk Fusion [UPDATED!]
10:01
Autodesk Fusion
Рет қаралды 46 М.
STOP overbuilding cabinets
15:13
Bent's Woodworking
Рет қаралды 944 М.
Design Curvy Parts the Easy Way | Fusion 360 Tutorial
16:21
Clough42
Рет қаралды 96 М.
Most Flexible, affordable, and easiest-to-make drawer system!
11:05
Hooked On Wood
Рет қаралды 687 М.
Fusion 360 for Woodworkers | Model a Complete Project in 30 Minutes
25:30
Foureyes Furniture
Рет қаралды 190 М.
You ONLY Need 12 Commands in Fusion  (Expert Advice)
12:14
Tyler Beck of Tech & Espresso
Рет қаралды 21 М.
Schoolboy - Часть 2
00:12
⚡️КАН АНДРЕЙ⚡️
Рет қаралды 17 МЛН