Thank you.

Hi Patty, I use a carpet underlay or sheets of furniture packaging for the similar projects. I re-use them many times after washing. Thanks

Now when I have done dozens of these and I have everything ready - about 1.5h making at the table and rinsing, then 1 hour in a washing machine, then stuffing / shaping 10 min, then drying 12-36 hours, then final touches and packing for posting to clients. The size depends on wool and micron / shrinking ability. Comes with experience.

It can be 300-600 gr - depending of the size.

Brandy, There is no special kind of wool - the only requirement it should felt well. Usually it is associated with fine wool fiber. The finer the wool, the faster the felting process, the less the craftsman is tired. On the other hand the coarser the wool the stronger the shape of the product. One can buy a small amount of wool and make a small project, then if satisfied use it for the making of cat cave.

You can use bubble wrap, or thing foam underlay

The reason for me to use the hot water from the kettle and bar of soap is that my stone kitchen top is cold, the work looses temperature very fast - so I can warmup/ boil the water fast to keep the felt workable. The bar of soap just speeds up my process (works as felting / agitating tool) and keeps my hands away from hot water on some stages. If you plan to make something wet-felted my sincere advise - start with something smaller - make a hat / beret (even few of them) in the same technique with 30-50gr of wool before you move to bulky projects like cat cave made of 300 gr of wool.

@@louisarull2275 Oh that makes perfect sense - thank you so very much!! =^.^=

You can use any plastic, even the rubbish bag. Cut a circle out of plastic bag, bubble wrap or any other strong and flexiable plastic. Thanks, Loui

For the bigger cat cave I would recommend making the resist about 60-70cm (24-27 inch). If it is any bigger it will be almost impossible to manipulate and hand-felt. The resulting size will not depend only on the size of the resist, but on the thickness of the layered wool. So the smaller resist with the bigger bulk of wool can give the same result as a bigger resist with the wool spread more thinly. And of course, the resulting size depends on the degree of felting / fulling the piece. The denser felt gives the smaller result, and vise-versa.

@@louisarull2275 wonderful explanation. Thanks so much.

You need to start with felting small things. Try to make a felted coin purse or beret hat - the same shape, smaller scale, easier to learn. Practice makes perfect. Good luck.

I made it out of carpet underlay - white slightly bubbly synthetic material. Some wrapping from furniture or white goods can be used as well.

Hi Mamoii, On this video I use carded Romney wool, sometimes I use carded Merino wool.

Can cottoon wool be used

Hi Mamoii, It must be some "animal" fiber from goat, sheep, dog, rabbit, silk-noil (row silk leftovers) - then it will felt. The cotton is not animal fiber = does not felt, acrylic and rayon are not animal fibers = do not felt.

@@louisarull2275 ok..thank you

You are welcome, Mamoii

Easy, turn off your volume.