Showing how to start up and run a D10R. *note: I checked the hydraulic oil level on the opposite side of the machine before I started recording. It's a sight glass on the tank beside the right door (from cab view).
Пікірлер: 225
@hardway52311 жыл бұрын
Man this is a cool vid, I'm a carrer trucker but in my next life I'll be a heavy equipment operator. Mad love to you boys that do it on a daily, stay safe and professional out there, big kids like me are watching.
@basspig14 жыл бұрын
Thank you for using better than a cell phone camera for this video. One of the few machine videos that is actually watchable.
@CATdozerboy126 жыл бұрын
"here we have a compact caerrrrrrrrr, and a D10errrrrrrrrrr"
@djkilatrd72175 жыл бұрын
I love that device, that's my favorite job
@MrChevrolet94 Жыл бұрын
😂😂😂😂😂😂
@rtway9412 жыл бұрын
Thanks for posting, haven't found a more extensive video than yours about complete procedures of the machine. Good job.
@OZZYSCRACKMEUP12 жыл бұрын
its amazing how you guys can spread dirt around with finesse in a huge machine like that. awesome.
@mrbluenun11 жыл бұрын
Thanks for the explanation of the D10's 'stuff'. Looks nice and cosy in there with just a few more controls compared to a curved blade.
@neilreid90057 жыл бұрын
Cool vid, thanks for posting. Very instructive. Love these beasts.
@111danish11111 жыл бұрын
I always wanted to see whats inside the cab !! thanks for posting.
@MsTranzi12 жыл бұрын
started my early machine operating life in the central queensland coal industry on the old " differential steer " catipillar D8N's and D9L's over 20 years ago, catipillar equipment is just getting better and better. finished my career on the the then new D9R and new D9T, excellent tractors to operate. world of difference to the old D9G's and D9H's of my dad's time in the coal industry. " ain't nothing like a catipillar motor "
@ToonandBBfan14 жыл бұрын
Great video - I love inside the cab instruction clips.
@BillRayDrums8 жыл бұрын
Why is that car still unsmashed?
@ghostliberty83938 жыл бұрын
lol
@gm16v14915 жыл бұрын
Yeah, thanks for all the info. My own Cat 3408 has done over 5,000,000 kms or about 70,000 hours in 80 tonne road trains, which is quite heavy work, and it's on it's 3rd in-chassis rebuild. Never been out the frame and the crank & block are still in tolerance. Cat make good machines & engines.
@evadvalcourt11 жыл бұрын
I ran a D10T for the first time last week .. WOW what a feeling specially when the biggest dozer i ran befor was a d6 lol !
@duramax785 жыл бұрын
Thank you for your time. Awesome video.
@CrazyCanuck9110 жыл бұрын
i wanna try one of these, ive only driven the 450 and 650J deere dozers at school, this makes them look like toys
@gangesexcavating11 жыл бұрын
First time I have ever heard an east coast Canada accent from you, in your videos Jason. Really noticeable
@XxChantelley12 жыл бұрын
i just learnt to drive a D10R & a D10N today. pretty cool stuff.
@cptn_rdbd48179 жыл бұрын
Nice educational video. I wish I get to try a dozer some day!
@midnightrider32614 жыл бұрын
i love this stuff, my grandfather works at a construction site and i get to drive this stuff to 5/5
@reichgbg15 жыл бұрын
Another high quality clip!! Keep them coming man!! :)
@poogan12395 жыл бұрын
Startup and control vid on the Neon, please.
@dedreman22273 жыл бұрын
Hahaha
@jorgefonseca92257 жыл бұрын
nice vedeo mate i driving before a CAT D9K and escavator CAT 245B i would like again working and use this equipment best regards from norway take care of this KING OF HEAVY TOY!!
@NickHey11 жыл бұрын
Those controls look the same as the G series scrapers, nice.
@PriestmanCub15 жыл бұрын
Very interesting, I'd love to get the chance to play with that CAT. The engine sounds good and VERY Powerful.
@danielkennedy152411 жыл бұрын
Very nice, good instructor! very cool, thanks
@generationll14 жыл бұрын
Thank for sharing.Enjoyed the tour
@metallicamell13 жыл бұрын
might have a traineeship driving a D11 here in Australian. cant wait to get into it!
@dtiydr10 жыл бұрын
And how freaking long was the oil stick?! Dam...
@tjweber73085 жыл бұрын
Should see the transmission dipstick
@vantagetes14 жыл бұрын
The steering toogles on the left hand would be the cluctch/brake combo, the deaccelerator is exactly like an accelerator except reversed (you have to let it out to get more fuel). The reason being is that you spend a lot more time at full throttle.
@vantagetes14 жыл бұрын
It's the quick attach we use to fill the diesel tank, the fitting is on the ripper so the service guys don't have to climb the tracks with a 3" hose.
@wantapgt12 жыл бұрын
Great video. That thing sure is intimidating.
@vantagetes13 жыл бұрын
@dozebud no problems, you didn't know. It wasn't fully warmed up yet but it ran for a couple min to get all the fluids circulating before shutting it back down and starting the video.
@harshbuttrue0115 жыл бұрын
nice video very educational never got to play on a dozer just backhoes
@madnbad14086 жыл бұрын
Awesome video thanks.
@vantagetes15 жыл бұрын
The D9Ts have the C18 now, and the D10Ts have the C27. I haven't seen any Ts with engine problems yet. For the most part all the dozers I have seen (even in heavy use conditions) usually hour out before you have an engine malfunction. Of course once you start racking up high hours then you need to do some routine engine work, which usually just ends up being pull the engine and rebuild while its out, or swap.
@huckster7813 жыл бұрын
i cant wait for heavy equipment operating training next semester!!!
@GarnettM11 жыл бұрын
Just wondering on this R do you have to Lock out the Cat to Reverse the fan ,The 10 N model i was running I had to sucked bigtime -Time sensitve stop pushing wood chips feeding a reclaim so when you`d blow the rad out with the fan and side guards on engine in winter to remove ice build up always had to stop & lock out , sure would have been nice to be able to reverse it while backing up for a new push -I see the steering is different too 10 N has T handle tip steering.
@vantagetes13 жыл бұрын
@THUND3R63 It was one of my vehicles yes. Needed something for when it was too cold or wet to ride the gixxer. Now I have a work truck and a Jeep. (and the bike)
@vantagetes12 жыл бұрын
@King441 Nope, there was no boot requirement for operators as the only time they would be out of the machine is when it is parked. Mechanics were the only people that did any sort of lifting that would pose a foot hazard.
@griffin8666613 жыл бұрын
Thanks for sharing the video. One day I will have to play with a dozer.
@dkhill272 жыл бұрын
Wish there was a big open field where I could play around with that beast and learn
@EliAngwin11 жыл бұрын
Whats the idea behind the reverse throttle??
@The1234bubba12 жыл бұрын
@vantagetes Great vid, really interesting to see how you operate a Cat dozer, d'you run your own firm?
@YotaLizard11 жыл бұрын
What is the purpose of the master switch shown in the beginning? Is this so that if there is an accident, rescuers can shut it down from the outside?
@vantagetes11 жыл бұрын
@disgustapated the dozer spends the majority of its time at full throttle when working so rather than having to hold the pedal all day you just set it wide open. Having a decelerator still allows the operator to slow down while working near objects or to control track spin.
@joeJrbill2 жыл бұрын
WHEN I WORKED FOR MANIX IN 1964 WEST OF JASPER ALBERTA CANADA..CALIF JOE WAS THE " PUSH" IT WAS A ROCK JOB..I'D NEVER EVER BEEN ON ROCK..JUST MUD & DIRT EXPERIENCE & TAUGHT NOT TO GO FAST WITH THOSE MACHINES... WELL ! HEREI WAS ON A D8 POWER TILT "U"BLADE & NOT EVEN A DRAW BAR ON THE REAR...PLUS THE TRACK PAD GROUSERS WERE ALL WORN OFF...AND I AM BEING CAREFULL & CAUTIOUS WITH THIS MACHINE & AS I AM MOVEING ALONG A LITTLE MAN APEARS UP THERE WITH ME..HES STRONG CAUSE I IS A BIG GUY..HE THROWS ME OUT OF THAT SINGLE BUCKET SEAT ONTO THE HOT HYD TANK...& GESIN MY SEAT PULLS THE THOTLE WIDE OPEN & SHIFTS TO 3RD GEAR..LIFTS THE BLADE UP OFF THE GROUND..HE'D YELLED AT METO PAY ATTENTION TO WHAT HES DOING..CUS HE AINT HERE TO BABY ME...BUT I AM TOO BUSY ATTEMPTING TO KEEP MYSELF FROM GETTING TOTALLY BURNT ON THAT DARNED HYD TANK TO SEE WHAT THE HECK THIS IDIOT IS DOING & WHO THE "F" IS HE ANYWAY ? HE'D SPRED ONE OR 2 END DUMP LOADS & YELLED AT ME NOW YOU SEEN HOW TO DO IT...DO IT..& DONT EVER LET ME SEE YOU DECELERATE OR SHIFT DOWN..I WILL FIRE YOU ON THE SPOT..I JUSTVTORE A HORRIBLE VERBAL STRIP RIGHT OFF OF HIM..AFTER I SHUT THE MACHINE OFF & I TOLD HIM I DONT KNOW WHO THE "F" YOU THINK YOU ARE..BUT YOU JUST BURNT MY BODY BAD ON THATHOT HYD TANK..IF YOU EVER COME NEAR ME AGAIN I'LL BEAT YOU INTO THE GROUND.. NOW"F"OFF....BUT GEUSE WHAT..NEXT COUPLES OF END DUMP LOADS..HE WAS BACKONTO MY MACHINE ..BUT THIS TIME I DIDNT MOVE & I ATTEPTED TO SHUT THE ENGINE OFF BUT HE GOT A HOLD OF THAT LEVER BEFORE I DID..BOY WAS HE EVER SCREAMING INTO MY EAR..I COULDNT GET UP OUT OF THE SEAT..HE KNEW HIS STUFF..I THOUGHTI SHOWED YOU WHAT TO DO..YOU DIDNT HEAR WHAT I TOLD YOU EITHER SO WE ARE EVEN...WHAT ARE YOU REFERING TO..YOU BURNT ME..HOW THE "F" AM I TO LEARN ANYTHING FROM A MANIAC ?? NOW GET UR HAND OFF OFTHAT THROTLE LEVER..& WE FOUGHT OVER CONTROL OF IT..FINALLY HE ALOWED ME TO KILL THE ENGINE..HE SAID I SHOULD FIRE YOU RIGHT HERE FOR FIGHTING UR SUPER INTENDANT...I SAID I WAS LOOKING FOR A JOB WHEN I GOT THIS ONE..SOI CAN GO BACK TOLOOKING AGAIN..THERES 6 OTHER CO'S CLOSE BY..HE KRPT ME IN THAT SEAT..HE SAID YOU JUST CAME FROM A DIRT JOB..RIGHT ? YES..WELL NOW UR ON ROCK & IF YOU WORK OUT HERE..YOU' LLBE ON ROCK TO END OF THIS JOB..EVERY OPERATOR THERE WAS SURE I WAS BEING FIRERED...BUT HE RELENTED & TAUGHT ME..I ENDED UP RUNNING EVERY PUECE OF EQUIPMENT THEY HAD ON THAT JOB..BE CAUSE HE FIRED LOTS OF OPERATORS..SO I JUMPED IN..THEY WERE ONLY 8 HR SHIFTS...I LEARNED LOTS THERE..THE MECHANICS LIKED ME..FOREMANS TOO...I LEARNED REAL QUICK LIKE...FUN FUN FUN.... I WAS 21 AT THAT TIME... CATAPILAR I FOUND OUT WAS A LOT TOUGHER MACHINE THAN SOME OWNERS THOUGHT THEY COULD BE...ROCK IS HARD & TOUGH & ROUGH...AND RUNNING A ENG WIDE OPEN ALL THE TIME IN 3RD GEAR NO LESS..THEY NEVER QUIT..EXCEPT THE GOVENER WOULD FLY APART SND IT SOUNDED LIKE IT WAS GOING TO EXPLODE..MECHANIC CAME & TOLD ME..SHUT THE FULE OFF ! I ALLREADY DID IT WONT QUIT...AT THE TANK !! OH ! RIGHT ! I FINALLY FOUND WHERE THAT THING WAS AT & SCREWED IT TIGHT AND IT QUIT RUNNING OH THANK GOD I SAID...HE SAID HIS NAME WAS NOT GOD...RIGHT ! HE FIXEDVTHE GOVENER RIGHT ON THAT MACHINE..THEN OPEN THE TANK SHUT OFF AND WAIT FOR FULEVTO FLOW THERE THEN HE HOOKED THAT LINEUP AND I STARTED THE ENGINE VIA" ELECTRIC START".. GOD BLESS...TURNED OUT THAT THE PAD GROUSERS WERE WORN BUT STILL HAD LOTS OF TRACTION..I ASKED THE MECHANIC ABOUT THEM..HE SAIDTHAT I HADTHE BEST TRACKS OF ALLBTHE MACHINES ON THIS JOB..WHY YOU SAY THAT ? THOSE ARE "ROCK" PADS..( THE GROUSERS WERE 'S' SHAPED & WAY WAY WIDER THAN THE STRAIGHT GROUSERS WERE...THAT MACHINE COULD & DID WALK ON BARE ROUNDROCK & NEVER SLID SIDEWAYS..IT WAS WAY AWESOME...IT WAS A REAL GOOD CAMP & JOB FOR ME....I CUGHT THE TAIL END OF THAT JOB...I'D SIGNED UP TO GO TO AUSTRAILIA FOR BUILDING A RAILROAD ACROSS THAT COUNTRY..BUT THEY CHANGED GOVT DOWN THERE & HALTED THAT JOB.. WOE WAS ME..
@michaelgriffiths75038 жыл бұрын
I cleaned tracks at the end of each day so the stuff doesn't dry. Then it's really hard to get out.
@peterincgy8 жыл бұрын
Building the new runway and Calgary international?
@landenduvall56737 жыл бұрын
Great vid
@vantagetes13 жыл бұрын
@MrMrtiki Should of tried to convince them to invest in a reversible fan. You can get ones that run on a timer and switch directions automatically at pre-set intervals so it blows the debris back out.
@quadcatfly12 жыл бұрын
I want to see it going over that neon !
@steve86865 жыл бұрын
Thanks now I know how to can start a d10 bulldozer
@vantagetes13 жыл бұрын
@arbitor55555able Actually it's not, the quick fill coupler for the diesel tank is. If you look closely you will see a hose running to a box with a round silver connector. The service truck has a quick coupler on the diesel gun they pop on there rather then having to haul a 3" hose full of fuel up the tracks and across the side of the dozer.
@gm16v14915 жыл бұрын
Can you tell us what engines you got in your machines when you do a vid e.g. 3508, 3412 etc. Llike your vids, they are very interesting. Last dozer I operated was a D9G when it was new (very long time ago!)
@gm16v14915 жыл бұрын
I guess that means the C18 replaced the 3408 because they are the same size (18 liter). So does the C18 have a good reputation for reliability? And what about the 3400s (3408, 3412)?
@musikhavok4411 жыл бұрын
Can i hear the start up of the Dodge Neon?
@Mechknight7311 жыл бұрын
Kinda risky leaving that Neon there, somebody might accidently use it as a wheel chock. But otherwise, thanks for showing us around the cab. In Western Australia, you name the mineral, somebody is digging it out of the ground here. Yet most miners and their contractors are too cheap to train anyone. I have operator tickets for a skid steer loader, a backhoe, a front end loader and an excavator, but because I have "no experience" they don't want to know me
@harryfreeforonce15076 жыл бұрын
Hey Mechknight73 I noticed you posted that comment 5 years ago Im curious how you got on...did you get a crank on a machine?. Im an operator based in Qld and went through the same when I was starting out 20 years ago.
@campbellstubbs11815 жыл бұрын
How do you see where you're driving?!
@Nolan4500010 жыл бұрын
Does having a job like this pay well ? And what kind of training do you need? I'm interested in this type of work.
@appl694 жыл бұрын
Personally i can answer it doesnt pay much better than an average 9-5 and basically have an timer show you how training wise and just have to have experience and most guys will hire
@hammer93883 жыл бұрын
I get anywhere between 35-43 depending on the job and you just need to not be a dumbass you probably won't start on a dozer but can get into it if you show interest and Initiative
@VirajPerera-ei4pb5 ай бұрын
Good video
@wantapgt12 жыл бұрын
Great video.
@732RAVEN8 жыл бұрын
Máš tam pěkný nepořádek. Prase !!!!!!
@emartin00812 жыл бұрын
good job man
@johnhershey40103 жыл бұрын
sounds good
@vantagetes15 жыл бұрын
Yeah thats the new ride hiding in the back there. 385C L Powerstripe (same as in the Powerstripe Slope Work video).
@GarnettM13 жыл бұрын
These are`nt to far from the new 10 N keys on the dash does this have the flouresent lights those are nice ,sucks that you have to lock out to blow the rad out with fan at least the one I was running did on a chip mill feeding 2 reclaims did it for 2 yrs with the older 9 n OMG what a differance no more levers this one has the 2 track brakes ours had a twist lever forward & backwards LOVE them .
@stevenchandler33909 жыл бұрын
He sounds like a pirate when he says r
@AidenHubbsCRM6 жыл бұрын
Steven Chandler Canadians 💁♂️
@darrinparkin7185 жыл бұрын
@@AidenHubbsCRM Eastern Canadians
@O7ROADKING13 жыл бұрын
cool video thanks for posting
@vantagetes14 жыл бұрын
@FUCKINROCKIT There is one on each side, if it's in dual mode as the one side goes up the other will go down. Now in single mode you can keep one side at the same level (say toe of slope) and change the other side to vary the slope.
@cooperdanieltherancher2 жыл бұрын
What year model dozer?
@vantagetes13 жыл бұрын
@bigfranco87 The twin cylinders will do both functions.
@jamespendergrass45618 жыл бұрын
That D10 sure looks alot like a 657G scraper to me! LoL
@ozziairlegger14 жыл бұрын
A good operator..starts his cold start pre check..with a walk around...check hoses..undercarriage etc.Check all fluid levels... engine pre start oil level..then when running pre check running level..air filter indicator..fire extinguisher indicator...cleans track frame daily ... cleans all observation glass points..checks all alarms. Then he does his plant running check after start up......via gauge indicator read out information ......similar to 747 pre start check up...lol
@THUND3R6313 жыл бұрын
My cousin has a gixxer, you the Suzuki Gixxer, if so what cc do you have
@JimBruce4215 жыл бұрын
looks like you got your new 385 back... got any more videos from the new office yet?
@HondaRacer24811 жыл бұрын
real nice rig jason she still running ok?
@ToonandBBfan14 жыл бұрын
How many gallons of diesel to fill that dozer up?
@turner59312 жыл бұрын
great video thanks vantagetes...
@vantagetes15 жыл бұрын
Calgary, at the Spy Hill Landfill.
@bigfranco8713 жыл бұрын
i thought the 2 cylnders is twin tilt not a carry blade?
@vantagetes15 жыл бұрын
Spyhill Landfill, we are digging new cells/mining out the gravel.
@skrep3592 жыл бұрын
So that decelerator is in somewhat of a way like a lawn tractor throttle. The more you let of the more you get?
@vantagetes2 жыл бұрын
You are half correct. Yes the more you let off the more you get, but your lawn tractor also has a decelerator and not a throttle pedal
@thegamer9896 жыл бұрын
Holy dip stick batman
@RandomBrandon3857 жыл бұрын
It seems like all Cat machines make a solid beep sound when they are started up. Is there a reason for that?
@AidenHubbsCRM7 жыл бұрын
Brandon Estévez dash warnings.
@CATMUSCLE15 жыл бұрын
Quality...Thanx man =D
@goldseekeridaho11 жыл бұрын
Where is the parkbrake?
@vantagetes15 жыл бұрын
I have a couple already made Popcorn, should put the first one up in a day or two.
@GuyThatCreepy11 жыл бұрын
And to think I my dad still has a D2 for tractor recovery... Don't get me wrong, it's a great little machine, but... The bigger the better, am I right?
@bensaxon712212 жыл бұрын
a d10 eeeerrrrrrr . and here we have a ceeerrrrrrrrrr
@maccamacca77623 жыл бұрын
I wish my dip stick was that long.
@l963nnn23 жыл бұрын
Subscribed. 👍
@vantagetes3 жыл бұрын
Thanks mate
@Brett130012 жыл бұрын
great vid mate but u forgot the most important feature - the wireless !
@Thoroughly_Wet5 жыл бұрын
So this thing drives full open if you don't use the decelarator?
@tjweber73085 жыл бұрын
If you hit the accelerator button and have your foot off the decelarator yes it will
@cityvice12313 жыл бұрын
How did you get a job like that?
@vantagetes14 жыл бұрын
Heh Mike so much for mr cat mechanic =p But I guess maybe Dexters doesn't run quickfills? If you look closely there is a square box with a round silver quick fill for diesel so the service guy doesn't have to haul his hose up to the cab. This one was worn out and leaked every time he connected/disconnect. That's where the leak is coming from. Good eyes none less! (Hey when you coming boarding anyways? Isaac is back on the 12th and I don't work weekends).
@WiIdbiII13 жыл бұрын
It's been 20 YRS since i ran a D-6, LOOKS lik they've really simplified the controls these days.
@joeJrbill2 жыл бұрын
1980s FOR ME..THEY WERE ALL FLAT TRACK MACHINES..I'D REALLY LIKE TO TRY MY HAND ON A D10 NOW A DAYS...QUESTION..CAN ONE PUSH SCRAPERS WITH THAT BARE BLADE ?? THANKS FOR THIS START UP VIDEO..GOD BLESS....
@dastanjames11074 жыл бұрын
Nice
@johndeere44515 жыл бұрын
5***** + fav! awesome!!!!!
@MrHeadshot19829 жыл бұрын
my dream job.
@hudsonjamesc8 жыл бұрын
+bud morse same here would buy one if I hit the Powerball
@MrHeadshot19828 жыл бұрын
lol
@justaredneck89406 жыл бұрын
If I got the Powerball is get a d11 and push my 307 and my d3 off a cliff
@xXFRISJEXx13 жыл бұрын
Now thats a bad ass monster !§§
@DesertDigger18 жыл бұрын
The next time you check the oil, read what it says on the dipstick.