This Caterpillar 3406c engine was consuming oil, and was due to Overhauling.
Пікірлер: 13
@user-jv7kr1rg5k5 ай бұрын
Good job 👍👍👍👍
@mechanicdodz9 ай бұрын
Nice job boss
@DW-hx1xm4 жыл бұрын
Nice one just watched to check timing marks position... i got it wrigh ...i have a basic cat manual which doesn't show in detail.. 👍
@matitoonline1203 жыл бұрын
Nice thank you my brother
@doudoumohamed78853 жыл бұрын
Merci
@elnino34883 жыл бұрын
Dose anyone kno the torque specs for the front gear s and plate ?
@tropg2 жыл бұрын
Hello, I was wondering if I could shoot some questions over to you for some help, we recently got out engine rebuilt which is a 3406c, we used a 3406b head with the 3406c cam as our head was bad, we are getting coolant in the exhaust but not massive amounts, at startup there is a lot of white smoke and idle there is constant light white smoke until the engine gets some heat into it… I feel the engine is also a little noisy when you give it throttle… any help would be great if you can
@matitoonline1202 жыл бұрын
Thanks bro, but I'm sorry for late reply 🙏🙏.. Now, ones you see coolant coming from the exhaust is definitely the cause of the white smoke. So you first have to troubleshoot to know what exactly is the cause of the coolant going into the combustion chamber. 1# you have to remove the aftercooler on the engine and test it to see if there's leak. 2# the liner seal, a crack or damage liner can also be the cause of water into the combustion chamber. 3# the seals in the intermediate plate.
@MiguelChavezTrejo10 ай бұрын
I have a problem on same engine , when I push the gas pedal to 13 or 14 RPM. , And I release the gas pedal,the RPM go up itinstead come down.
@tropg10 ай бұрын
@@MiguelChavezTrejo try checking the return spring on the throttle