I want to mention steps one by one to complete diagram 1) draw top view in xy plane 2) draw side view in zx plane 3) create points in zx plane at specified diatance 4) draw arc using three point arc and join to points 5) click on sweep, select reference plane, select on 'creat extrude', and then select profile, and guiding curve. 6) repeat above steps, except the guiding points replaces reference plane. 7) after completion this, join the sweeped surface which was done in above steps. 8) extrude the top surface, click on split, join and extrude and press on 'other sides' option 9) right click on extrude and press hide. 10) go to start option, mechanical design , part design and add the thickness to profile by click on pad. 11) finally, go to tools, hide, click on all planes, all sketches. 12) thus you get the required spoon, which you want to draw.

Kamran bhai how you have taken 20 distance in front view of 40 radius curve

Nice guide, thankyou!

Thank you bruh usefull

thank you for the video! i've done the exact operations as you do however i cannot achieve join operation, there's a connexity error between sweep 2 and sketch 4. how can i solve it?

How i can find this spoon design 2D

can u please share the drawing

i m having difficulties while splitting it shows error as i click join and extrude what should i do