Ive seen an increase in the quality of your work over time. keep it up!

I love watching you make parts for your projects using the lathe you made from scrap parts. Those bearings need grease and I would set the races deeper so that you can put a seal on the outside. Keep doing what you are doing, it takes a lot of time and effort to build these projects and share them with us.

I see the comments, build what YOU want, others can build what THEY want. Just have fun building, that’s what it’s all about!

If I lived nearby I could absolutely help you get that motor right again. Resurrecting old neglected bikes is something of a specialty of mine.

Hahaha cringed at the scale. Tap the scale first to zero it out, then wait. Once you see zero then put your weight on. Also I really enjoy your videos! Keep up the great work!

Oh yay, another over-sized heavy buggy build.

With opposing tapered roller bearings, you need some kind of locking mechanism for the bolt, nut or collar that sets your end play. Do not just tighten that socket head cap screw down and call it good. Search for "Bearing Collars, Sleeves & Locking Devices." To set your end play, put a dial indicator on the end of the axle and tighten your fastener down until there is zero movement or slight pre-load, then set your locking device.

Amazing how you can make every thing!! Your a inspiration for my channel. 42 subscribers😃❤

thank you for keeping going and investing in the chanel

You are a great fabricator in my opinion because the tools you use you've build yourself. Well done buddy! 👍😁

Love your videos bro!! you are one of the reasons that I've started doing my own channel thank you very much I've learnt so much from you♥️👍

Sounds like fun. This might be a versatile design. It's all about the build.

The amount of time to make your videos and builds is incredible! Thanks for sharing it with us!

I'm super siked to see this rear suspension build! Building it with no Heim joints I can imagine because lots of cars and buggies don't use them. But no CV axles?!?! lol. That I can't imagine!! REALLY looking forward to this build!!!!!!

I feel like we see all these awesome projects but we never get to see them climb a mountain or a trail. And whatever happened to the trike?

I'm in youtube heaven right now. Thank you man

good work man! i like all the machining you do yourself. more fun to watch someone make there on parts insted of just buy everything

Excellent Job. Excited For The Build. Great Work.

Please build this one with reverse

Double swing arm?? I’m very excited to see how this goes. You are very talented. Thanks for the quality content.

You got me all excited to see how this is going to work. Looking forward to the next video, keep up the great work!

5 minutes into this video I found myself thinking about the yz85 shifter cart. It is really cool seeing your builds transform from little badass go carts, to big off road beast! You are a genius! I'm sure you dont see it lol. But from the first video I saw from you (the yz85) I've been hooked. Keep it up brother thanks for the vids

I love watching how you've grown as a craftsman. Great job, keep it up!

Man I just saw your latest video on this series, and went back now to watch the whole thing from the start.. Good stuff :) :)

This guy deserves more views and subs been watching for while now and He has gone up from complete beginner to professional This is going to be a great build🔥🔥🔥🔥

Your editing and building skills are getting better and better. I'm really enjoying your content and keep up the great work. The music didn't go unnoticed. 😁👍

Alright Dammit!!! This build is starting on my birthday so it damn well better be a good one!!! No half measures,no cutting corners and the wheel travel better be epic. ......I'll be watching

You take the old statement to a whole other level: I love work i could sit and watch it all day... cause your work is super cool.

that's easily the best hand truck I've ever seen.

Right ON, Brother! This one will be awesome!

can I put some turbos on this please :)

I like this channel. I like that you build and fabricate your own parts. Keep up the great work

No other content clicks with me as much as this does keep up the good work👍

Its called a tapered roller bearing

Wow, looks like is going to be a major build. At least this time you are starting with enough HP to push it around.

Incredibly excited for this build! I keep thinking when I watch through my various 100s of KZfaq channels that I subscribe to that whatever new project I'm seeing built is THE BEST BUILD YET! Then a new project will come along like this one! Cracked House Fab has an INCREDIBLE build going on right now with a 4WD cross kart! Maybe after this, you could do something like that too!

Thanks for all the great videos, i really enjoy watching them. Just one thing. Dont forget to build in sealings in the hubs.😊👍👌

As always great work! Really excited about this one!

good work man! i like all the machining you do yourself.

Man that hand truck has seen better days. 🤣

Dude great work 👍🏼👍🏼 I’ve been following you for a while now and just remembered to subscribe. First time commenting also

Make sure you use the stock air box. I’ve got a 600 in my odyssey and you need to have the stock air box for it to run correct

So I just came from marathoning the homemade lathe build... and I'm pleasantly surprised to find that you've been using it for all the recent projects you've been working on. I gotta say, I'm impressed.

I like the home made pipe roller fixture. First time I've seen you use it. 👍

It's funny KZfaq channel is I Rather Be Welding when you do twice as much machining. You have more machining tools then a machine shop. Lol

I love u dude for real, your videos satisfying me the moment the notification Popped up . Keep up and best of luck and success.

Love your machine work

Whoa dude🥰🥰🥰 amazing machinery's work. Cannot wait for the next episodes c:

You offer wonderful and distinctive content, followers from Egypt

Every project you do the engine get bugger and bigger each time!

That is going to be bad ass!!!!!!🇺🇸💪!! In my opinion you do really good work..

I appreciate your work and drive. Keep at it and you’ll see 500k+ subscribers before you know it. Would love to take my sons your way for a meet and greet.

Wow another project man you are on 🔥🔥🔥🔥🔥🔥🔥🔥 that engine is going to be insane!!

VF1000 will finally have some competition

If you keep makin these videos I’ll keep watching them! 👍

I really hope you didn't pay that guy his full asking price if the ad said "running engine" :/

Very excited for the new project, I hope it will be as cool as the vf1000

Amazing parts you're a great fabricator

That engine can work. It was really cheep. We bought a 2008 CBR 600rr for our FSAE for about 800 dlls. It was just the engine and it had a. Repair in the sproket zone. If your engine doesn't have water mixed with the oil the only thing you'll need to do is to take off the motor head and clean very good all the cilinders before even trying to move it. Spry some rust cleaner and let it work for a couple of hours. Then just polish the motor head and put a new gasket. For the wire harness you can try the long one from haltech (work pretty good and have great quality) don't remove any material from the valves, remove gently the rust and Polish them. Make sure the valve matches the sit in the motor head so you don't have any leaks in the combustion. Wich you the best of success in this project.

Wow bro nice job. This was very impressive

Fantástico trabalho,não perco um só trabalho deste canal,sempre com boas ideias!!!

That's a big project bro keep the videos coming

Man your getting very good at your work man your amazing

Looking good! 👍

it is cool to watch you work with the lathe and welding

I'm so curious. Great work.

Getting better

am from jamaica bro your builds are freaking awesome

Great stuff Chris! 2 tips / suggestions... 1) Consider replacing your Press Jack with a Pneumatic jack... Much faster than manually pumping and will work great for operations such as broaching, like you were doing. Harbor Freight sells 12-ton and 20-ton pneumatic jacks. 2) Consider buying yourself a set of V-BLOCKS for various operations such as holding round stock parallel in your vise. I use both of these tools in my shop all the time. GREAT inexpensive upgrades well worth the investments.

Would be awesome to see you build something that's AWD someday, until then I cant wait to see the next video..

I would love to see you mid mount the engine. Like the rock bouncer buggy, Outlaw.

Like your videos I have two engines ones in my buggy it's a zx1000r and I have a GSXR 1000 but I live in Southwest Florida

You are a PRO...... at making parts.....damn..

Don’t forget you will need to grease those bearings add grease zerts . Im super excited for this build I love how many precision machining tools you have ever looked into cnc plasma cutters?

Also, do more videos with driving VF1000! You put lot of effort into that beast, enjoy it a little! :D ;

Dude builds awesome carts gets enters with that dolly! Lol

Love the channel

You offer something very creative, followers from Egypt

I like the way you did multiple keys for the rear axle! I think that will hopefully be just about as good as a splined axle if not better! They certainly look beefier than a splined rear axle.

very good video..thanks for your time

I'm excited about this. Thing has almost as much HP than my Civic, and the car is peppy af. It scoots.

You're a mad scientist!

Never buy anything without taking a good look at it and even if you drove 6 hours of you have that gut feeling dont do it

A guy down the rd was building a buggy with suspension using a chain drive off the front to the back hub. Lots of fab but kool.

The Metal Working Guru 👍

I got an old goldwing engine that had water in the intake runners that was pretty rusty and i thought I'm screwed but with removal of the heads and a good cleaning at it was fine as long as the pistons aren't seidzed you should be golden

Those port look sick other than the rust lol no wonder they make big power

Making the engine run, is gonna be an interesting project

I wish you would do more than one video a week but I know it's a lot of work but keep up the great work your doing a great job bro

when a 1l has more power than your 2.4l and your 3.4l also your progress as a fabricator is insane, keep it up

You see I like your videos everything's all good and stuff you put out quality work I mean good quality work and I only got one problem you need to finish one build before going on to another that's the same problem I have when I start working on stuff but I'd like to see the reverse trike finished

Chris great genie.

You ain't lying about that shipping being ridiculous I'm still waiting a month later for a set of Hub adapters I ordered from California and I'm in East Texas

Here I was wondering why that lathe looked so familiar... I watched you build it! I didn't realize it was the same channel! LOL

Yesss new buggy

This is going to piss off your neighbor soooo bad its going to be awesome!!!!!!!! That was the best part of your whole channel... If I was you i would be flying all over the place wide open...

this soundtrack hits different

Looks like you are building a twin trailing arm, twin chain drive set up, very cool, been thinking about that for a while to build a pedal powered quad.

If you are not sure if your gonna use this engine....and i know you prefer the cbr engine....but i would suggest the 1500cc v6 from a honda goldwing cause it has a reverse and a cruise control, a lot of torque/hp ...but not sure about the prices!...glad to see you start a new project....keep it up!

yeeey finally mini trophy truck