I would be so lost without your videos. Thank you Balkan :)
@asiab23352 жыл бұрын
Thanks a lot for the great tip of using roof as a substructure for suspended ceiling! This tool has superpower!
@Arpucci Жыл бұрын
You are de best Revit guru! Congrats
@_White_Shadow_3 жыл бұрын
Guys... I took almost 1 year to do something meaningfull in revit.... I started self learning because I didnt had the money to invest on any accademy even to subscribe for Balkans paid contents.Till time this man had all the answers and solutions when Im really stuck.It doesn't mean I m expert and done, Im still learning.Since this February i m in revit based company and earning some money by doing modeling the concepts of many minds. I always recommend these tutorials to everyone. Dear Balkan there is a DM in your Insta. I was nothing.. you made me something.
@balkanarchitect3 жыл бұрын
I'm so glad to hear that my tutorials helped you! Good luck with your job and I hope you become a complete expert soon! Thank you for such a kind comment! 🙂
@_White_Shadow_3 жыл бұрын
@@balkanarchitect Woooooww......😍😍😍😍😍😍😍😍🤗Enough for meeeee.....
@MohamedELBAKKAL-jk1id5 ай бұрын
Merci beaucoup, tutoriel vraiment intelligent et très instructif
@lnhamo2521Ай бұрын
Splendid
@samuelmoreno63723 жыл бұрын
Thanks for your tutorials... you are so good in revit.
@user-th8ue9re7v10 ай бұрын
Very Nice and Detailed Design of Ceiling. I will make same Hopefully soon
@Tue_3 жыл бұрын
It is a nice way to present a product, but there is more to a model than just presenting it - some would most likely want to extract information from the model, and it saying it was a roof and not a ceiling would annoy some quite a bit. :) - And I know it is allready annoying when architects use curtain walls to portray windows or doors instead of actual doors/windows.
@ahmetfarukcevik2 жыл бұрын
thank you for video, i couldnt find system panel : empty , there is only solid,glazed system panel ? if you help me i would be grateful.
@rocketron113 жыл бұрын
FATAL FLAW!!! This is all very nice in being able to create such detail, even when having to go through so many steps in this software. Problem I see is this gyp ceiling that goes through the entire grid layout has no accommodation for lay-in light fixtures. I can hardly think of any room that doesn't need to address lighting. Most conventional lighting for suspended ceilings use lay-in fixtures. How do you effectively address this with your ceiling grid approach, without making even more non-time efficient modeling?
@AstridQi4 ай бұрын
The tutorials are brilliant and that's why I bought the family pack from the link you've included. But suspension rod is not included in it.
@miminmaryani4421 Жыл бұрын
This Amazing so iam glad and able help my job... Thanks.
@ThreeMinuteHeat2 жыл бұрын
I had bought the Revit Template + Family Pack, thinking the Family Pack would surely has the "Suspension Wire" at least and some exterior furnishing like Aluminiun Panel and Double Glaze Curtain Wall etc, but the Family Pack i got are just furnitures mostly (like you would get from SketchUp), trees, cars, cabinets, human, some sinks etc. Nothing useful in terms of designing buildings, like pre-built ceiling mullion, the suspension wire, interior and exterior wall finishes, roof etc. Even the advertised stairs, i dont see it. Pretty disappointed to be honest. but dont get me wrong, I am only dissapointed by that package (i thought it would contain all the components he has up to date (from all of his tutorial), for a higher one time payment). His videos tutorial on revit are still very good and clear, and very much appreciated.
@jairoalcidesvillamarin86653 жыл бұрын
Thank You, desde Colombia, gracias
@user-qr1js7dp4f2 ай бұрын
Please tell me how to make a ceiling stand. Thank you
@michaelpechbrenner6144 ай бұрын
What about lights? Will this work for Face or Ceiling when placing lighting?
@3zzzzom512 жыл бұрын
U THE MAN
@markgallegos40463 жыл бұрын
Mind blown!!!!!
@yac213 жыл бұрын
Thanks
@ericleung08103 жыл бұрын
It seems using curtain panel is better if you've already using the curtain wall family, btw nice tutorial!
@balkanarchitect3 жыл бұрын
If you include the panels in this curtain roof, then it would look odd. The panels become smaller then the mullions, like nothing is holding them in place.
@ericleung08103 жыл бұрын
@@balkanarchitect we can then create the panel family to extend its profile and set offset 😁
@richard-ngo95372 жыл бұрын
Thank you for the interesting tutorial. But I wanna ask How to place the lighting ceiling if you roof by footprint to model for the ceiling. Thank you
@ThreeMinuteHeat2 жыл бұрын
where can i get suspension wire?
@2461tutor7 ай бұрын
Hey Balkan Architect! Thank you very much for the tutorial. I downloaded your file from patreon and it works well. However I need to adjust it accordingly to the shape of my Building. Is there a way to do it? I would be super thankful for any help.
@TortelloFaCose5 ай бұрын
do you have a way to create rods automatically in the nodes? thanks
@graceanderson32802 жыл бұрын
Hi Balkan, thank you for this tutorial, very helpful! Is there any way to automatically create hangers/connectors from the sloped glazing ceiling? I need connectors at every intersection and hangers every 900mm and my boss thinks this can be magically generated with the click of a button but I'm convinced your way is the only way!
@jeroen65172 жыл бұрын
this may work by making your hangers a family. Then open up your curtain wall mullion family and use the hanger as a component to create an array.
@taimursohail17233 жыл бұрын
Creative
@JavierOropeza083 жыл бұрын
If a bim modeler I was working with told me they were finished the ceilings and showed me this I will be so mad at them for wasting all this time...
@NH005313 жыл бұрын
I think it’s about picking the level of detail appropriate for the project. No point doing this if you’re designing the whole office building but if the job is replacing an existing ceiling with a new grid, fittings, margins etc etc then this level of detail I think would be appropriate.
@JavierOropeza083 жыл бұрын
@@NH00531 still no....unless you are the manufacturer, but even then, no because these are all premade sizes... So let's say you are renovating an office, why waste time on a section of this basic ceiling? If you wanted to see this in section, just use a detail component...
@AussieBIMGuru3 жыл бұрын
There's a couple of jobs I know that did this LOD but you're right it's pretty rare we'd go this far on a standard project. A technician would indeed get in trouble for this unless the project specifically demanded this. I've automated this based on surface patterns in the past for a client, and they were a supplier doing detailed takeoff (I showed them ways to automate the measurement without the modelling as well, but they were quite visual).
@betz423 жыл бұрын
@@JavierOropeza08 Agree with you, even in CAD files we normally refer this to the specs and then ask the contractor to do a shop drawing only if its needed. I would insted invest this time in the placement and coordination of electrical trays, and HVAC to see if they do not mess up with our architectural design.
@JavierOropeza083 жыл бұрын
@@betz42 100% agree with you buddy
@fernandocoellojimenez8835 Жыл бұрын
Donde puedo conseguir una familia como la tuya para el "suspension wire"?
@koukadorra2561Ай бұрын
Your videos are very interesting but there is a little bit of disorganization in your explanations and sometimes you include unnecessary steps like modifying previous works done by you which you could modify before making the video. This is a little bit confusing especially for beginners. Thanks for your comprehension.
@Ovi_B2 жыл бұрын
Hello, I have one question, is there some tool to draw on the real ceiling the model generated with this tool?
@sajidsolkar44302 жыл бұрын
How to add light fixture
@somethinginformative68203 жыл бұрын
Which profile is good for creating suspended wires ?
@sanjaypujari54883 жыл бұрын
Looking for your scan to cad modeling in revit
@moamekhan77503 жыл бұрын
How can i make it shaded like your
@mansourbellahel-hajj53783 жыл бұрын
We can make Ceiling panel through curtain wall panel
@MiguelChalita3 жыл бұрын
have you ever placed lighting fixtures in your models?
@mansourbellahel-hajj53783 жыл бұрын
@@MiguelChalita yes once
@thebi0hazard3 жыл бұрын
Може да постигнеш същия ефект със инплейс фамилия и да я категоризираш правилно или дори също със обем и curtain wall , но пак ще е в грешна категория обекта . Но за големи проекти ще е доста трудно ... 😁
@User_2026_7 күн бұрын
If you have non-rectangular panels "which is not uncommon" it wont work unfortunately! poor approach :(
@npatel2252253 жыл бұрын
Hi Sir i was watched all most your videos and like but i have small question for you so how can i contact you
@npatel2252253 жыл бұрын
i want to subscribe all your coerces but i have small question please reply how to contact you
@balkanarchitect3 жыл бұрын
If you sign up to my website (free) you can contact me there. :)
@npatel2252253 жыл бұрын
@@balkanarchitect Thank You Sir
@npatel2252253 жыл бұрын
i was sign up already but there is not seen any option to contact so how can i contact ?
@lilikrimce90013 жыл бұрын
How can I contact you? I have purschased a course from your website and now it is not giving me access anymore. It says password or email incorrect while they are correct. I had to press forgot password and it should have sent me instructions to recover it but nothing. It has been 2 days. I wrote you on instagram, both at Milos T. And Balkan A. Please, support from you is needed.