If installing cladding to a small area say 8" by 8" then only install the edging to two sides of the room as its very difficult to bend in such a small place. Use paint or wallpaper scrapers to make job easier to fit boards into edging. If you have difficult small corners then cut the edging down the middle with a saw first and just stick it into place with mastic. Same with the first and last pieces of edging. I used the boards to cover up an unsightly artexed roof in bathroom and used lots of mastic to stick the boards to the ceiling. Looks brilliant and very professional now its up.

I tried stapling both the edge trim and cladding, and both just shattered. I ended up screwing the cladding through the hidden lip 😒

This is one of the best lessons on practicals

A nice clear video and the corner technique saves fiddling with mitre joints. I use small screws instead of staples which means the cladding is easier to remove at a later date if needed (e.g.) for change in lighting, fitting new services - pipes, cables etc). Is there a video on making the fitting of h trim techniques as I do find it is hard to install.

thank God for youtube i have to get this installed and people wanna charge me 5 flipping thousand for a simple job like this let those money houng depart from me thank for this awesone video😍

It's amazing how am opportune to how how to achieve pop ceiling from the beginning to the finishing process, this is a good avenue to learn more of other handmade stuff like this

I having trouble with the staples shattering the tongue of the cladding. Either the staples are too big or the stapler is too powerful? I'm using wickes cladding, 14mm staples and a Stanley TR250 stapler.

What’s the best way to fit trim around pipe boxes external corners

Good video!

What adhesive did you use? My ceiling is falling apart the screws I used are left on the button wood .

What's the best way to remove some panels without damaging them. There a drip coming from above and I need access to investigate but want to try and use the panels again.

Why they doing in the corners stright??? Is not proper job,i always cutting off...1trim and above i leaving normal at every kind of trim in ceiling.

Awesome video friend .....

Thanks, great simple video. Do you sell your products in Costa Rica?

What type and size screws would you use to secure these PVC panels into walls and ceiling? into wood battens ceiling and hollow plasterboard for walls please?

very good video,thanks for the uploader

Why are the starter trims left square and not cut to a forty five joint angle and why staples when screws give a more secure fix ?

Thank you, best work.

It suitable to install at bathroom?

Is it necessary to add air vents to an outdoor ceiling when using this product?

Great video! Helped me lots!

Nice

How much spacing should there be between the battens?

nice demo

easy job... now l can fix these things. thank you.

Wont the staples rust??

Bonjour comment posé la dernière

What is the life span of a pvc ceiling? ...and can i use it on my eaves where it will be close to the zink roof and receive alot of heat?

Tu as bien fait merci

What if your ceiling is more than 2.7 metres does it join at the ends Thanks

Nice Video

What will happen with this stuff is that after a couple years black mould will form in the joins and be next to impossible clean.

Quite easy and fast

how to carroten. aquavelvet cream

اشكر جميع العامين على هدا الفن

great work .... thanks for tutorial video

I like this

Just the job

Can this be painted?

Isko round kaisa gumay

Thanks sir

Not that helpful. What do you do if the room is longer than the length of the caldding? i.e. MOST applications.

tanks

Thank you

Good

Essa foi boa

good iob

no gramps si parafusos kkk

حلوووو

M

ج

A q o PL

Saade design is better

Nu

Looks cheap ..So I guess you get what you pay for .

Nice

Quite easy and fast