Ceramic Pendants, glazing and cutting
Рет қаралды 3,718
Жыл бұрынHow to make Ceramic Pendants, how to cut, shape and glaze ceramic necklaces #ceramic #necklaces #jewelry
@ritamontalvo6195 2 ай бұрын
I use a cut up beverage straw for the holes. Depending on the item, you could use bar drinks straws very thin to the wendys milkshake ones!
@ritamontalvo6195 2 ай бұрын
I suggest you have a rubber stamp made out with your signature. Just stamp on the back. I just use the rubber..order it without the wood post and use your thumb to press on clay. You can either use clear glaze on the back or just leave it bare. Make sure it is very smooth. Love your colors.
@SetGozo 2 ай бұрын
Thanks for the tip! Because I am multi media artist I tried to sign all my pieces if I can. To keep it my own touch. I do have stamps I made myself but folks like my original signature.
@afra._. 11 ай бұрын
Thank you❤
@SetGozo 10 ай бұрын
Thank you too
@anniematheson426 2 ай бұрын
I have questions!❤ I’m pretty new at using a kiln. How did you glaze the bottom but still lay it flat? Also, can you use any glass beads in a kiln? I had no idea you could do that! Your jewelry is STUNNING!! Thank you for your video!!❤️❤️❤️❤️❤️
@SetGozo 2 ай бұрын
No glaze at the bottom it will stick on shelf and will ruin it. I leave it unglazed. Glass is ok as long as it will stay in the middle and protect the kiln shelf by using a patty try in case it spilled over. Test first before using on final piece.
@SetGozo 2 ай бұрын
The bottom I used underglaze or stains bec they do not fuse on the kiln.
@srpincelartspace1531 2 ай бұрын
What did you use in the upper part of the stones?
@SetGozo 2 ай бұрын
I glaze the ceramics. I use Amaco glazes and sometime glass (tiny).
@SetGozo 2 ай бұрын
If you are asking about the texture I pressed on? It is a rock or choral I found in Cayman island.
@minniemouse3839 Ай бұрын
Scusa ma da orrendi diventano bellissimi... ma non su capisce come!!!!!
Land of Reiki and Aroma - Solange Carneiro
Рет қаралды 4,5 М.
MyVian
Рет қаралды 206 М.