CF MOTO 450MT 'YOSHIMURA' SLIP-ON EXHAUST 'HOW TO'

Рет қаралды 7,406

Күн бұрын

IN THIS VIDEO WE HAVE A DETAILED INSTALLATION OF AN AFTERMARKET SLIP-ON SILENCER.
I HOPE THIS VIDEO IS HELPFUL TO THOSE THAT DOES NOT WANT TO MODIFY OR REPLACE THE FACTORY HEADER PIPE.
AT THE END OF THE VIDEO I WILL GIVE A BRIEF IDEA OF WHAT IS IN THE NEXT VIDEO TO COME.
SO STAY TUNED
IF YOU LIKE THE VIDEO, PLEASE GIVE US A LIKE & SUBSCRIBE
THANK YOU FOR YOUR SUPPORT AND I'LL SEE YOU IN THE NEXT ONE
LINK TO THE PARTS USED:
SLIP JOINT:
www.aliexpress.com/item/10050...
SILENCER: (NOT ORIGINAL YOSHIMURA)
www.aliexpress.com/item/10050...
0:00 Intro
0:27 Weight Difference
0:49 Sound Check Before
1:15 OEM Exhaust Removal
2:15 Installation
5:49 Final Product
7:14 Sound Check After
8:05 Test Ride
11:26 What's Next?

Пікірлер: 46

@hein3g 22 күн бұрын

Thank you for your feedback. The video does not do the pipe justice, sounds much better in person. Factory silencer weighs 3.9kg over the aftermarket weighing 1.78kg

@drzrider3440 20 күн бұрын

Nice deep sound. Hoping they have a full exhaust. Like a larger diameter header as well a cat delete. No need for emissions where i live. Can plate a twostroke dirt bike, literally even a riding lawn mower can be plated and ridden on the streets here just north or Seattle, WA.

@cv1176 Күн бұрын

que buenos videos y canciones !!

@yassincasaful 21 күн бұрын

Sounds beautiful!

@jasondunn8313 10 күн бұрын

Thought the stock unit actually sounded pretty good for a factory can but the Yoshi is great. Sounds like a much bigger bike. Well done on the way you clearly show the components and how to install them 👍

@hein3g 9 күн бұрын

Thanks for your feedback Jason. It does sound better in person though. My microphone at the time of recording clipped and didn't pick up the audio as good. Got a decent microphone now so should be making a proper video on the bike soon and get quality audio recordings from what the exhaust sounds like. So stay tuned...

@francardosoagudo3541 15 күн бұрын

Y como no esperando los colectores a ver que se puede hacer 😅😊saludos desde España 😊

@stevesanelli90 22 күн бұрын

Perhaps im just an old fart. I quite like the stock exhaust muffler & stock sound. But, it does sound fruiter! Swapping out the muffler, has it affected the low speed fueling & throttle grip position? Is it popping like crazy on the overrun? Since you're an engineering chap, could you lengthen the bracket to move the clamp midway over the can to give it a balanced support? Also, if you have those facilities, maybe create a new hanger to incorporate the pannier racks & do away with the pillion footpegs all together? You'd need shorter hex cap screws, but doable. Otherwise, you have got some cracking scenic roads there! Cheers!

@metalsadman 17 күн бұрын

I might get an aftermarket for weight savings and to make the kids in my neighborhood happy, they keep asking me a rev bomb everytime I pass trough lol.

@hein3g 9 күн бұрын

Hi Steve ,she doesn't backfire as much. The only pop here & there when shifting gears and a burble on deceleration. Yes I'll see what I can do with the pillion pegs as I'm always up for saving weight where I can. Thanks for watching and stay tuned for more.

@hein3g 7 күн бұрын

@@metalsadman 😄😄😄👍🏼

@allanbrown3493 21 күн бұрын

Whitemans Valley Moores roads, my fav weekend blat on my sv650s, similar sound with after market exhaust. Nice

@francardosoagudo3541 15 күн бұрын

Hola compañero, pues muchísimas gracias por tu canal yo ya estoy poniendome al dia de acesorios 😊gracias a ti🤘🤘🤘🤘👌👌

@hein3g 15 күн бұрын

Thank you very much. Appreciate your feedback. 🙏🏼

@RichardS-qh8mi 10 күн бұрын

Don’t think there’s a better sounding small capacity motorcycle engine out there - glorious music coming from such a little lump!😁

@hein3g 9 күн бұрын

I agree with you...The sound of this bike is what made me pull the trigger on this specific bike. Then I had to ad the exhaust to amplify the sound😄

@Priidik 9 күн бұрын

yes, sound like a bigger engine

@davidz8 22 күн бұрын

A big weight saving, interesting to see the length of the pipe when the silencer is removed, I would like a raised exhaust similar to the HP Corse version for the Tenere, looks like the pipe would need cutting. Thanks for all the interesting videos as I wait for MT.

@hein3g 21 күн бұрын

@@davidz8 Thank you for watching. I would also like a slightly steeper angle but yes, would have to start modifying the header.

@MrKdr500 14 күн бұрын

CFmoto have a fuel map update for the 450MT on the app. available now in Australia.

@hein3g 14 күн бұрын

@@MrKdr500 Thank you for your feedback. I also did mine last night😊

@metalsadman 23 күн бұрын

great sound, what's the weight of the stock exhaust btw?

@pnkru_9909 22 күн бұрын

Watch video dumbass.

@babar69110 4 күн бұрын

Yks for video; I guess you can't have exact flow changing the exhaust, so what about the correct ECU mapping ?

@hein3g 4 күн бұрын

@@babar69110 Yes for now I won't benefit much if there's any gains to achieve from having that slightly less back pressure. But ,I don't really care too much of gaining 1hp if that's possible... I'm getting great consumption(3.8l/100) to work and sounds awesome while doing that. We'll see if any software tunes come available at a later stage. But under warranty, I won't be doing much.

@hein3g 4 күн бұрын

@@babar69110 Once again,thanks for watching... I have more content on the way.

@akagadget 17 күн бұрын

Sounds really nice.. would be much better is realtime. The bike is also sounding more peppy

@hein3g 9 күн бұрын

Thank you for your feedback. Yes she does sound a lot better in person. I will get some better recording of the exhaust pretty soon with a proper microphone. so stay tuned and thanks for watching🙏

@howardmann5634 21 күн бұрын

What kind of panniers did you get for the new racks

@hein3g 21 күн бұрын

@@howardmann5634 I got the Rhinowalk 14ltr x2. Fits very well. I will do a video soon.

@ricardovieira3385 18 күн бұрын

Great video man !! Keep up the good work

@paulvandervyver4223 20 күн бұрын

The standard pipe seems shorter than the new pipe though

@hein3g 20 күн бұрын

@@paulvandervyver4223 Thank you for your feedback. Yes, it probably is. I wanted it to be longer as I was wanting more of a Tenere look. I wanted the pipe angled upward more too. But don't want to modify the factory header ,so I just kept it at the same angle as the header.

@nevillegreg1 22 күн бұрын

Did you machine the collar or have it made for you by a muffler shop?

@hein3g 22 күн бұрын

@@nevillegreg1Hi Neville, I made it at work as we have a engineering department and lots of off-cutt materials.

@nielolee 9 күн бұрын

@@hein3gDo you think we could just use the smaller slip joint and bypass the need for custom collar?

@hein3g 7 күн бұрын

@@nielolee Yes sure,you possibly could. Reason I had to make the collar was because I ordered all the bits before I had the bike. So I went off the SR450 measurements... I'm sure you can just get the one size down from mine.

@MudaholicJR 18 күн бұрын

Sounds great. What size slip joint did you use?

@hein3g 18 күн бұрын

Thank you for watching. I have used 45mm/51mm. Reason I had to make a collar stepping up from 41.7mm to 44.9mm.

@dizzerflames945 16 күн бұрын

@@hein3gwhat’s the collar made of and how did you make it

@hein3g 16 күн бұрын

@@MudaholicJR Aluminium 😁

@nielolee 9 күн бұрын

Are you making more and sell them? @@hein3g

@nielolee 9 күн бұрын

@@hein3gwhere can I buy the muffler and that slip joint?

@malcolmmathers2690 13 күн бұрын

all these after market slip on mufflers are a rip off i rekin

@hein3g 13 күн бұрын

@@malcolmmathers2690 You get much cheaper ones that I'm sure will do the same job. But if you are referring to original aftermarket...I would agree with you. If I was to buy this Yoshi original ,it would cost $1500nz. That is a lot of money!😖