CF Moto Uforce 600 Horn and Turn Signal install

Рет қаралды 2,419

3 ай бұрын

RecNation Ep025
The UForce 600 gets a horn, turn signals, hazard switch and flasher installed.
CF Moto Part Numbers
Horn Kit 6060-150600
Horn Switch 5ASV-169040-6001
Turn Signal Switch 5ASV-169060-6001
Flasher 5ASV-150340-6000
Hazard Switch 169070-6001
Curt Taillight Converter 56175

Пікірлер: 11

@Bearsdenadventurues Ай бұрын

great video

@recnation8045 Ай бұрын

Glad you enjoyed it

@jonvankuiken6932 3 ай бұрын

Great video! What year is your uforce 600? I have a 2022 600, parts are not listed for my year, I assume it is the same? Thanks -Jonnyrooster

@recnation8045 3 ай бұрын

Mine is a 2022 and the parts listed fit. If you notice in the video, the turn signal blinks faster when you hit the brake. The Curt adapter was listed when I searched LED compatible. I'm testing others now to see if there is a better fit and make an update video. Otherwise it was a pretty easy install.

@rdreamhomestead1451 2 ай бұрын

How is the machine holding up and have you adjusted the valves? Some say they don't touch them but the manual says they should be adjusted at 20 hours.

@recnation8045 2 ай бұрын

It is holding up really good. I have not adjusted my valves yet and it has just over 300 miles on it. The valves are not making noise and seem to be good for adjustment. I plan to do a quick maintenance on it for changing oil for the summer and a grease job.

@jasonrussell8520 2 ай бұрын

Would anyone have information on installing the flasher on a 2023 Uforce 600? It's a different part number (5ASV-161000-7801) and appears to be in a different location. I found written instructions that say "Connection plug located under steering column, attached to firewall." But I'm not seeing it.

@recnation8045 2 ай бұрын

That is the correct part number according to cfmotousaparts.com/ I am not sure on the install. Open the hood and follow the wire harness out of the bottom of the fuse box and look for a loose plug. That is how I found this one no the 2022. They are good about zip tying unused plugs out of the way. My guess is you will see a place to screw it to the firewall above the brake master and the plug will be in that area too. Let me know if you find it.

@jasonrussell8520 2 ай бұрын

I found the plug. It’s inside the cab, below the steering wheel and above the brake pedal on the firewall. You have to remove about a dozen screws and two pop rivets, then pull back the bottom plastic tray/molding on the driver side. Wasn’t difficult, but it’s well hidden. You can’t see the plug until the plastic is pulled back.