CFMOTO CFORCE 1000 Overland Clutch Kit Install & Test Results
Рет қаралды 120,153
2 жыл бұрынWe did it! Blake and Joel at MSC spent a long time testing and trying different clutch setups and we finally found great combinations for the 2021 and 2022 CFMOTO CFORCE 1000 Overland. We now are making these clutch kits available to you at Main Street Cycle! You can either go to the website or text them and get the perfect setup for your CFORCE 1000. We also show you exactly how to install a cfmoto clutch kit from MSC and how to properly reclock the cvtech secondary clutch. So get yours quickly and tell them you saw this video and that blake sent ya!
Remember to get your 2021 / 2022 CFMOTO from Main Street Cycle! Tell them your a fan of the channel and that Blake sent you.
T-Shirts and hoodies! Also something for the Ladies... So click here to check out the store my-store-11474901.creator-spr...
You can purchase your CFMOTO at Main Street Cycle; Americas #1 CFMOTO Dealer! Just call 662-438-6407 Monday - Friday 9am to 5 pm. You can visit the Website at www.mainstreetcycle.com
If you enjoy our videos and want to help support this channel please click this link:
/ realtalkpowersports
Check out the page and I encourage you to watch the short video that you will find on this page and check out some of our goals and benefits of becoming a Patron for the channel! Yall are Awesome!
If you want to see what CFMoto has to offer subscribe to our channel.
Also go check out Main Street Cycle @
www.mainstreetcycle.com/
Also Visit their Facebook Page @
/ mainstreet.cycle
God Bless!!!
#CFMOTO #CFMOTOUSA #MainStreetCycle
Warning: CFMOTO recreational vehicles are intended for off-road use only, and can be hazardous to operate. Read Owner's Manual and all product labels before operating. Never operate on paved roads. Operators and passengers must wear a helmet, eye protection and protective clothing. Operators must be at least 16 years old with a valid driver's license. Passengers, if permitted, must be at least 12 years old. Always use seat belts, cab netting and doors (if equipped). Never operate under the influence of alcohol or drugs. Avoid excessive speed and sharp turns, and never engage in stunt driving. Check state and local laws before operating on trails. Take a safety training course before operating. Contact your CFMOTO dealer for more information, call the ATV Safety Institute at 1-800-887-2887, or go to www.atvsafety.org. ©2015 Zejiang CFMOTO Power Co., Ltd.
@christopherncolvett1976 2 жыл бұрын
Joel hooked my 600 up with a kit a few weeks ago. Drove in from Tennessee and was back home before lunch. Great people to do business with!
@RealTalkPowersports 2 жыл бұрын
💪👍
@cliffyb4197 2 жыл бұрын
glad you guys finally got one we spoke a few months ago when I got my cforce 1000 up here in Canada but there was no exhaust or clutch options. love the channel thanks for the content.
@bigjay6743 2 жыл бұрын
Thanks guys. I have 24 km on my brand new CF moto 600 I'm gonna call that broken in lol. I just bought a set of rims and tires lift kit. Now I'm gonna clock the clutch. Thanks again for the video makes it easier.
@Dreamscythe1 Жыл бұрын
really good guide on changing them, clearly showing what to do and what your looking at, very good directions and quick and to the point
@letstravel4613 2 жыл бұрын
I love how Joel is always just so chill lol.
@jefffranklin6790 2 жыл бұрын
That clutch kit looks like it made a hell of a difference I will be ordering one for my 800 real soon
@davetrepse83 2 жыл бұрын
Thanks for the video maann !!! The CVTEC company is near my home in Québec .. the best clutchs on the market !
@drewswigart1257 2 жыл бұрын
Another awesome video brother. I love how Joel is always just so chill lol.
@RealTalkPowersports 2 жыл бұрын
Haha yes sir
@captainjoesanglingadventur4894 Жыл бұрын
Been seeing these things at a dealership by my parents house in Louisiana. Always wondered about them being a Chinese Brand ATV and you already know where this goes, have watched about 5 of your videos as well as some others and I just called wife and said we gonna go take a ride and check out the 500 we hunt so as far as the abuse you guys put them through we will Never go that deep with it. Thanks for all the awesome reviews and advice
@RealTalkPowersports Жыл бұрын
You won’t regret it.. The new 500 is excellent
@thehost2909 2 жыл бұрын
Glad there is people making aftermarket parts for this bikes
@MottiMatti_R 2 жыл бұрын
Nice video👍🏻 Greet Joel that if the ATV crashes and he gets under it, it may be the last trip. It happened to me last summer and I was unconscious for 20 minutes😅
@thadfoote8653 2 жыл бұрын
Luv these guys so much information!Keep um coming,If it wasn't so far away I'd buy ATV from them.
@RealTalkPowersports 2 жыл бұрын
💪👍❤
@jf4395 2 жыл бұрын
Great just got my unfi filter from MSC, Wiskey bent tip comes tomorrow. Now I have to order this...Oh what a christmas to myself this year...lol
@RealTalkPowersports 2 жыл бұрын
Thats awesome bro!!! 👍💪
@garypatrick2403 2 жыл бұрын
Awesomeness in the making! I love it
@RealTalkPowersports 2 жыл бұрын
💪👍
@mecanicul_8 7 ай бұрын
Salutare din Transilvania România foarte interesant și foarte multe informații utile
@minnesconsinprepping7856 2 жыл бұрын
For what I'm going to use my CForce 1000 for, I'll just stick to the factory clutch. Not tryin to be offensive, I mean, sure.....there was a little more there, not much, but, a little, but it's just not worth it for what my main uses are going to be for, which is WORK. It's going to spend most of its life in low range pulling stumps, hauling trailers of wood, pulling a tiller, and plowing driveways. Anyway.....I took mine out in the 20+ inches of snow we just had here in MN, and had one hell of a time! I LOVE it!! These things are a BEAST! Right from the factory. There will be some trail riding involved with the wife, but, we don't need to be able to pull wheelies......in fact, I think she'd be pretty pissed if I did that to her! But it's cool that you guys do what you do for those that want it! I know I'll be checking in with you whenever/if ever I have issues with my ride.
@e8220 2 жыл бұрын
You guys do great work man.
@RealTalkPowersports 2 жыл бұрын
Thanks very much
@shawnstoik 2 жыл бұрын
JOEL THE MAN OF FEW WORDS!
@KakarotsSpirit4 2 жыл бұрын
Great stuff as always guys 👍😎
@RealTalkPowersports 2 жыл бұрын
Thanks so much
@paulwuzhere 2 жыл бұрын
Dang, those get up to 60 pretty quick. Impressive!
@RealTalkPowersports 2 жыл бұрын
Yes sir..
@donaldwilson6168 2 жыл бұрын
A good thing to do is take pictures while doing each step before and after each piece comes off since we all have cameras now a days! And put the parts in a zip lock bag marked with what step you did.
@Kwhopperfan 2 жыл бұрын
You can easily see the difference in the tuned clutch vs stock. That power to the ground is so immediate, impressive!
@RealTalkPowersports 2 жыл бұрын
💪
@nikolamalivojevic3110 11 ай бұрын
@@RealTalkPowersports hello, I need your help, I actually have a cf moto 1000 overland, I would like to improve its power, I was wondering if you could help me how to get the parts, can I order through amazon?
@angryman71 2 жыл бұрын
I know I have asked about this before, BUT... have you guys considered doing a video on adding factory blinkers to each of these models of CFMOTO? Many, many people want to add blinkers (factory, preferably, on the quads).... and good videos! Thanks for doing these!
@obsjuan209 Жыл бұрын
maybe im wrong but dont they come wit them? i have a 2020 cforce 1000 and it came with them stock
@bjrnrailton3806 2 жыл бұрын
Hey, great video! Could you tell me the inner and outer dimensions of the circle of the clutch compression tool? (the round bit that sits towards the clutch?)
@713anand Жыл бұрын
That clutch kit. Look what Joel is doing.
@johncolosio6764 2 жыл бұрын
Mr Joel is the man🤙
@RealTalkPowersports 2 жыл бұрын
😎👍
@davidhammack6107 2 жыл бұрын
Amen , Praise Jesus!!! , you guys are awesome , thank you .
@RealTalkPowersports 2 жыл бұрын
💪👍
@codyschmidtmann3992 2 жыл бұрын
Holy hell Blake, We got both of our machines around the same time you were just starting this channel when I just got my second 800. Pay attention after you going to the clutch guy and then coming back and you and Joel doing it I can just about do this in my sleep now. You guys are killing it.
@RealTalkPowersports 2 жыл бұрын
Thanks brother
@codyschmidtmann3992 2 жыл бұрын
@@RealTalkPowersports We still have no 1000 cforces by us yet. Hoping soon. Definitely can see the difference from your guys's dealership to others. Great job
@RealTalkPowersports 2 жыл бұрын
@@codyschmidtmann3992 thanks Cody. Hopefully you will have some near ya soon
@codyschmidtmann3992 2 жыл бұрын
@@RealTalkPowersports I really really hope that other than the dealership cfmoto has done something special for you because going back to your first couple videos cfmoto
@codyschmidtmann3992 2 жыл бұрын
What's at the beginning of people knowing about them and if you search anything about them on the KZfaq your channel comes up every single time. I really hope they're looking out for you.
@khofficialmusic 2 жыл бұрын
Will this work on a 2020 cforce 1000 or isit only for 2021 2022 overland 1000
@thunderkid93 2 жыл бұрын
Where on the 800 xc or the 600 is a good keyed on power source
@lanttop 2 жыл бұрын
I bought a kit from you last year for my 2019 400 and finally installed it yesterday. In the instructions you sent with it didn't mention the marks needing to be lined up on the primary clutch. Do I need to take it apart and check those marks or are they not on the 400?
@icekingnorth 2 жыл бұрын
Possible to post torque specs for cforce 1000. Just bought clutch kit hopefully arrives today. The service manuals were out of stock. Thanks
@jameyirish4933 Жыл бұрын
I just did a stage 3 clutch in mine is the spring to strong to make the helix move a little to the right or are my arms just to tired from compressing that spring. I got the helix up against the right side of the little black bump stops.
@sebastianpollok7234 Жыл бұрын
Thank you MSC for this video. This kit is an Stage 2? The wheelie is done in H or L? A Cforce 1000 with full throttle make a wheelie?
@collinwatkins7451 2 жыл бұрын
I need to know how to get the mud away from my motor need a video on how to take the skid plate off the 2021 500 cfmoto
@djs_projects_repairs Жыл бұрын
My question would be though is after changing the clutch set up to get better lower end and range through out the power band. Is how much does it effect things wjen ur in low with full difficulty lock.
@vbar66l93 2 жыл бұрын
Wish you guys were here in Las Vegas.
@lexxthegreatest 7 ай бұрын
I just purchased 30 inch tires got my ECU tuned. Would love to know if I can clock it to b3 instead of B1. Cf 1000
@Nomadnordic 2 жыл бұрын
Sweet can you please make a instruction for Uforce 1000 as well?? Do you Ship to Sweden?
@danholmes9212 2 жыл бұрын
Any benefits of clocking the secondary without a clutch kit on stock tires cforce 600 touring
@dearbulls 2 жыл бұрын
Sorry I don't quite get it. What's the point for the clutch kit? Do they go bad in such a short period, or if it's better clutch for durability, or if it's just for performance? I don't need a toy but a reliable hunting tool. Should I get the clutch change then?
@komunakomunale6643 2 жыл бұрын
i need a honest answer? what about cf for long trail ridings.. do they suffer from belts burning or so...
@andrewktmskov5041 2 жыл бұрын
Can you please tell me how many grams were the new weights that you installed into the sliders? And how many grams were the original ones?
@Vuhjayjay68 6 ай бұрын
Do you guys have any videos of these units drag racing the Polaris or can am
@jrbenoit1962 2 жыл бұрын
What are the torque specs for the 1000 Overland 2022 for primary and secondary?
@alanj7306 2 жыл бұрын
Blake, stop messing me up. I was set on the 600 Touring before, then they fixed the issues with the 800, and now you’re teasing me with the 1000. I just don’t know what to buy anymore 😆
@RealTalkPowersports 2 жыл бұрын
Hahaha wait till I get a new 2022 cforce 500.. ill make it even harder to choose! They are all great
@mjuhanil 10 ай бұрын
Does adding clutch kits affect belt life
@jrbenoit1962 2 жыл бұрын
So I have ordered a stage 3 clutch kit, ECU upgrade and some other parts. Do I have the buy this manual just to get the torque specs for the clutch after spending all that money on parts?
@adampecore6917 2 жыл бұрын
Looking for a CForce riding group in MN, preferably northern Mn. Sorry to post on your page, but I don’t do Facebook and you have a huge following! Thanks
@conmanumber1 2 жыл бұрын
Can-Ams has the best engine braking in the industry. How are these and also the belts?.
@brentc7597 6 ай бұрын
How do you hold the primary when you want to torque it to spec?
@davorcujic6549 Жыл бұрын
please advise, I bought a CF1000 overland, I use it for 90% road driving and the consumption is high...is there a way to reduce the consumption (clutch kit or something else)...thanks
@Mitchie.the.kidd. Жыл бұрын
What do you recommend for the 600T I wanna pop wheelies to 😂
@marklarson9436 2 жыл бұрын
Killer video as always. I have a 2021 800xc that is still stock. I'm planning to order the lift kit here shortly. The stock wheels seem fine to me. Do you have a tire brand/size recommendation for 70% trail and 30% pavement riding that will fit the machine once lifted? I'm not mechanically strong enough to solve for fitment issues. Need something that will bolt on and work. Thanks for all the content. Your channel has a cult following in Wisconsin.
@RealTalkPowersports 2 жыл бұрын
Mark the best tire for what you are describing may just be the M1 Evil made by AMS in a size 28. But if you take your fender flares off then I know you can fit the 30 inch ones.. Or you can fit a 30 inch Blackwater Evo.. but the AMS M1evil will last much longer on pavement and the Blackwater will give you better traction off road and still do good for 30 percent pavement
@marklarson9436 2 жыл бұрын
@@RealTalkPowersports Thanks a bunch. When I call Main Street for the lift kit I'll be adding the tires. Enjoy your Sunday.
@compilaitionatv. 7 ай бұрын
why can't i remove the clutch, the bolt has loose , but clutch doesn't take off???
@robertsanborn1056 Жыл бұрын
I would love to go riding with you all.
@atvseatexchange2176 2 жыл бұрын
Great job Pastor Blake and Joel.
@RealTalkPowersports 2 жыл бұрын
Thank ya!
@rileyclark108 2 жыл бұрын
Hey man love the videos I have a cf moto 800xc and I'm wondering if I put 28 inch tires on it if I will need a clutch kit if I don't will it cause any problems
@RealTalkPowersports 2 жыл бұрын
It won't necessarily cause any problems.. but it will help the performance with the bigger tires if you get the clutch kit from MSC
@rileyclark108 2 жыл бұрын
@@RealTalkPowersports ok thanks
@emadalhussaini7296 2 жыл бұрын
Do you have videos on paddle break
@AleksandarAvramovic-uy4dy 2 ай бұрын
Hello. Is it possible to do the same on my CF x4? And how? Thank you.
@michaelhertsch3622 2 жыл бұрын
How much does the stage 3 clutch kit cost for the z950 ??
@mudslinger704 2 жыл бұрын
so which clutch kit is this
@braydenlowe1745 2 жыл бұрын
Hello real talk powersports would you be able to make a video of the uforce 1000xl?
@RealTalkPowersports 2 жыл бұрын
Yes I am going to make another one as soon as we get some in
@Gokywildcats11 Жыл бұрын
What do you gain by doing this clutch switch a rooo
@bostjanskvarca3203 Жыл бұрын
Hello! How much cost a this cloutch for my cf 800-2 , year 2015 Thanks, and Best regards, Bostl
@acebristoll1 Жыл бұрын
I have recieved my stage 3 trail kit for my cforce 1000. Currently the machine is all stock and this will be the first upgrade. In the instructions it shows to clock it to B1. After modding more in the future is there a chart or list for recomendations of where it should be clocked with biiger tires, or a tune etc?
@lexxthegreatest 7 ай бұрын
Have you gotten a response yet? I’m was wondering the same thing.
@joemccubbins8648 2 жыл бұрын
Will this effect the warranty? I love it!
@therealbigfoot3076 2 жыл бұрын
Yes
@martinneps9387 9 ай бұрын
Who makes the biggest and powerful 4 Wheeler that is automatic. Please comment back and let me know. Thank you very very much for this video
@shaneroberts2101 2 жыл бұрын
Do you guys have a kit for a 2015 cforce 800?
@markuskrause8327 2 жыл бұрын
hi do you have a list where you can describe which setting options the spring has?
@RealTalkPowersports 2 жыл бұрын
Go to main street cycle website.. www . main street cycle. com
@johnwiechel 2 жыл бұрын
Is it ok to grease the shafts before putting the secondary back on?
@johnwiechel 2 жыл бұрын
So dnt need to use the spring that came in the bag with the weights?
@willjohnson105wj 2 жыл бұрын
I bought a 2021 cfm moto 500s with 4 hrs on it. I'm almost through the break in period,and all it does is click ,no its not the battery, I can bypass the selinod and it cranks. Is there an issue with it or a relay? Do you have a link to where I could order the correct selinod, thanks
@RealTalkPowersports 2 жыл бұрын
Yea go to mainstreetcycle . com And go to the oem parts tab.
@lilrichie6951 2 жыл бұрын
Quick question, by doing this at home or even at the shop will this void a warranty ?
@RealTalkPowersports 2 жыл бұрын
That will be a question that each individual would have to ask their local shop. But in my opinion, If you do a clutch kit.. and you later need to bring your atv in for warranty work on your 4wd actuator.. the clutch kit first of all would have no affect on the actuator of your 4wd... so therefore it shouldnt affect the warranty in that particular example ... but again.. it comes down to your local shop and what they say.
@thundarthebarbarian7869 2 жыл бұрын
America ! 🇺🇸 👍👍
@user-pz1mv5ed3z 2 жыл бұрын
good 👍
@RealTalkPowersports 2 жыл бұрын
💪👍
@djs_projects_repairs Жыл бұрын
I'll say impressive. But how would it turn out with a tune and clutch kit oof
@RealTalkPowersports Жыл бұрын
Even better
@Noraxus 2 жыл бұрын
its cool but there has to be cost to pay. what about life expectancy on belt?
@RealTalkPowersports 2 жыл бұрын
It's better on the belt because we are eliminating as much belt slippage as possible.
@ChannelMarker 2 жыл бұрын
Maybe they’ll make a non 2up 800/1000
@zentrumdeswissens01 2 жыл бұрын
But why didn‘t do cf moto this from factory
@FLORIDIANMILLIONAIRE Ай бұрын
I got a zforce 1000 side x side doesn't do anything like this
@harrispadilla7137 2 жыл бұрын
can someone please tell me where the fuses box is located in the 600 touring 2021
@RealTalkPowersports 2 жыл бұрын
Lift the front hood.. and look to the top left corner for a little black fuse box (if your standing at the front of the atv
@ligitsnowman714 Жыл бұрын
So wait did Joel do B3 on the stage 3?
@RealTalkPowersports Жыл бұрын
No sir he did B1
@reinhardsemmel1534 2 жыл бұрын
i am owner of a cforce 1000. is it posible to order that clutchkit from germany?
@RealTalkPowersports 2 жыл бұрын
Yes it is but shipping is getting more and more expensive to ship out of US.. but if you will contact MSC through text msg: 662 438 6407 and tell them your address and Dylan or Tisha can get you a shipping cost.
@davemaurice135 2 жыл бұрын
I want to cat walk on my bike. How do I get this kit in Canada?
@RealTalkPowersports 2 жыл бұрын
You can order by simply texting 662-438-6407 Monday morning
@jrbenoit1962 2 жыл бұрын
On my 2022 Overland 1000 that nut was a 33 was not a 30
@mdayne1142 Жыл бұрын
I need a kit for the cf 600
@RealTalkPowersports Жыл бұрын
We have the perfect one for you at MSC
@AlexVladAtvVlog 2 жыл бұрын
Hello, where can you buy the kit? Thank you
@RealTalkPowersports 2 жыл бұрын
Main street cycle website
@ondersari977 2 жыл бұрын
Hi where can i buy these parts
@RealTalkPowersports 2 жыл бұрын
Main street cycle
@ChrisrodriguezXMR650 Жыл бұрын
Can you give me the link to the upgraded cultchs
@RealTalkPowersports Жыл бұрын
Ill comment it below..
@RealTalkPowersports Жыл бұрын
teammscparts.com/products/msc-stage-3-clutch-kit-trail-cfmoto?_pos=1&_psq=team+msc+stage+3&_ss=e&_v=1.0&variant=45603935191348
@ChrisrodriguezXMR650 Жыл бұрын
And a link for rear axles for my overland 1000 2022
@jeffdover6845 2 жыл бұрын
Went to the website but don’t see it for the 1000??
@RealTalkPowersports 2 жыл бұрын
Jeff just text the msc number and they will get your order. 662-438-6407
@jeffdover6845 2 жыл бұрын
@@RealTalkPowersports i did but they text back and are closed,I will try on Monday
@alexgunya7610 2 жыл бұрын
Hi! How many grams are the weights?
@RealTalkPowersports 2 жыл бұрын
Alex why would we spend all the time and effort and money for testing and tuning.. trial and error.. and then just tell you what the weights and spring numbers are so you can go buy else where using our results? No company will do that.
@josteinandersen8794 2 жыл бұрын
@@RealTalkPowersports This is BS from You. Have a look at Vauhti Varikko explaining his clutch kit. kzfaq.info/get/bejne/h8l6bMhl0L69c40.html
@AnElectricHorseSocorro 2 жыл бұрын
I find the 600 very powerful, great machine. The constant pursuit of power and engine size is mostly marketing hype in my opinion. I don’t see the point in emphasizing popping wheelies. Teenage immature foolish etc. There is no substitute for safety first. It’s the same principle as “ the gun is always loaded”. No substitute!
@agdetailing4671 2 жыл бұрын
where to order this cforce 1000
@RealTalkPowersports 2 жыл бұрын
Main Street Cycle
@Infamouscoma885 2 жыл бұрын
Wouldn’t exactly call that a massive upgrade it’s barely pulling on it till I’m guessing around 30mph been interested in one of these but idk if I would be willing to sacrifice power even come into from my brute force which seems to have better power on huge mud tires.
@titanpat57 7 ай бұрын
👏👏👏👏👏👏❤
@scorp14901 Жыл бұрын
Can you send me a link please
@RealTalkPowersports Жыл бұрын
www.mainstreetcycle.com/shopping/item/1116/msc-stage-3-clutch-kit--trail-complete
@rosemoodie2658 2 жыл бұрын
Can I get a ATV for me
@antoniojose.7478 Жыл бұрын
Oi 🤙🤙🤙🤙👏👏👏👏👏🥰
@nh1carrara27 2 жыл бұрын
Junk! Get yourself a outlander 1000 or a sportsman 1000. You won't have to put all you weight on the back to lift the front tires.
@DCSPORTSTER 2 жыл бұрын
If they’re junk why are you watching this channel you’re obviously curious. Got a little bit of news for you they’re built way better than your sportsman or your outlander. But you probably have blinders on when you’re looking at these things so being brand loyal gets rid of your money
@Clownbaby666 Жыл бұрын
I hate my rzr and it’s a pile of shit. Terrible durability. Sold my 15 outlander also. Very uncomfortable and durability issues. Love my grizzly and thinking about a cf moto next
@Bennett-xo6iu 8 ай бұрын
I have a question so you sell these clutch kits but why does cfmoto have the reclocking numbers on there i see abc and 123 i just dont understand where you are supose to go with it if your running stock tires. I just got a 2022 cfmoto 800xc any help would be appreciated
Real Talk Powersports
Рет қаралды 13 М.
PADLOTOON
Рет қаралды 41 МЛН
Real Talk Powersports
Рет қаралды 62 М.
Real Talk Powersports
Рет қаралды 305 М.