Thanks for watching . I now mainly put my recent project and updates on Instagram. Video editing take too much time . My IG profile : K.buildingthings

@@K.buildingthings awesome, Thank You for the name, I just started following you there, cowboy735.. keep rocking those skills Sir

@@RattleSnakeScaleModeler you have a dang cool work station

@@K.buildingthings thank ya Sir, taken a few years to get it all in order and then 3 months to set it up while recovering from surgery lol getting old sucks sometimes.. but the down time was enjoyable.. I've got another room I have to set up for a different hobby this summer lol

Thanks for the compliment

thx for the complement

thank you so much for the complement

You can .. it takes awhile to set it up .. 10 is just nice . Why don’t just set it up as a display first . When you decided to start painting you can work one 1 set first and test things out . Slowly progress from there

AMAZING MATER PIECE! its the best video of gundam base! and Im really love your technical,not less not much,as you say less is more,u made a colorful on SDMG,u made a great base in this video, and your digimon and exia is perfect tone.....oh my god Im looking forward your new video maybe more tutorial of coloring and LED, and I just sharing to my Hong Kong friends!wish you all the best

and you make me decied to DIY a smaller domain base like you, may be 50cm x 30cm in my glass cabinet,and put on some GUNDAM on that

@@edmond411hair thanks for the love .. sorry haven’t had time to put up more video and content . But if you like to follow some of my recent work . I have it in my Instagram . instagram.com/kbuildingthings?igshid=YmMyMTA2M2Y=

Hello, just wanted to ask if the CG domain base compatible with VT domain base, comparing to other videos the VT is more suitable for 1/144 scale and a bit smaller in other videos as I compare it. Thanks.

@@MercyRabbit nope I both are same scale.. the whole base can fit RG up to PG depending on how big you build it .. accessories doesn’t really matter .. Base on another builder have used VT and CG. He recommended to use CG because better fitment . instagram.com/p/COqfEn6DOAR/?igshid=YmMyMTA2M2Y=

Much welcome

Thanks for the complement

Thanks for the compliment @davidwood

You are welcome ❤️

It’s nearly impossible not to speed up the video . Else the video be at least 50 hour long . You let me know which section you wan and I try check if I recorded it using timelapse or not. If I have it on normal speed I don’t mind sharing it . DM me on Facebook. Weathering was pretty much using Mr weathering and then removing it with lighter fluid .

yea , this whole build was experimental all the way. so there are a lot of things are my first time . weathering was mainly used to fill up panel lines the lazy way..

hi toy bal. i power them with 2x AA size battery match with battery holder that you usually can get at those robotic hobby store, my older project salvage the holders from abandon toys

How do you connect all leds? What circuit? Is it series or parallel? And do you use resistors?

Hi Marquis.. I only connect them directly to a 3v battery pack. No resistor

thanks for the feedback! anything i should improve on? i know my voice over explaination not that great yet but this is my first attempt

The base ,No .But the connection points for the accessories ,yes . I only widen them with a drill bit

Hey there .. they cranes are not sold separately .. they come as an accessory with the CG domain base . I bought mine at the local hobby store. If you can't find "CG domain base" on your online store can try the original product which is "kotobukiya mechanical chain base"

it really depends what you looking for. if you only have limted tools , then buy the Wing Gundam, becuase the kit whitout painting looks very plain . i used total of 12 box to create this scene, and total with LED extra accessories and painting is surely enough to buy a PG zaku.

@soundblast52 I'm not sure where you are .. but I got mine from my local hobby stores I saw it before on GMC , here is the link www.gundammodelcenter.com/index.php?route=product/category&path=16

@@K.buildingthings Thanks for the help!

@grace megumi , let me tackle few of your question . 1. if you planning to do a PG size, you can still a PGU into a two floor of the Domain base , but if you planning to fit a PG Unicorn, then it will be slightly over two floors 2. the CG staircase it is modular. so you can actually swith around panels to make it a giant 1 floor stair case like what your see @7:42 or even stack it up to a 2 floor stairs. Dont worry so much about the scale as it is actually big for a 1/100 scale . (you probably cant tell but the Engineer figures are 1/144 and many ppl use them in PG as well) 3. The colors, im mainly using airbrush to paint them. Not really an expert in spray can, but , going with Gun metal / Grey would give that industrial look to the base. as for the metalic colors i was using is from a chinese brand JUMPWIND. hope i manage to answer your questions. If you have more , dont shy away and go aheasd and ask.

@@K.buildingthings I really really appreciate your answer my question!! It helped me a lot! Thank you so much !! !! 🙏🙏🙏🙏🙇🙇

May i ask a bit more about Thinner, after I did panel line for my gundam, I try to use very little SMS Premium Thinner with cotton swabs to brush the part of the line out of bounds. But after I brush I saw like a glue conjunctiva on the surface and cannot clean it.... Is that SMS Premium Thinner different from the X20 Thinner? I am first to use this ...🙏

@@gracemegumi9181 are you using tamiya panel line ? If yes then just use x20 or zippo lighter fluid.. Googled sms thinner . Is lacquer . Lacquer is stronger than enamel will remove all.

O i see ! yes, im using tamiya panel line, I have no idea the SMS premium thinner is too strong for that ! Thank you for replying and answer 🙏 I will get the X20 one !

hi there i just notice i never got around replying to your comment. For this build i was using the 1:100 scale version from bandai. But if you want to use it for PG, 1:64 scale will be the best , generally these can be found from those Hotwheel or scale car collectors hobby store for their diorama. Those high detail ones are usually resin printed and dont come cheap

i got seperately off my local hobby store. is called the CG DOMAIN BASE STAIRSCASE & CORRIDOR. It might be called something else somewhere. shopee.com.my/CG-Domain-Base-(suitable-for-all-scale)-Staircase-Corridor-i.85615218.5618556815

@@K.buildingthings Thank you!

@ctm Chong . The RGB is from a tea light candle set I got from MRDIY store instead of a micro SMD led... then use optic fiber cable to transfer the lights over to the runway.. The only SMD led I used are the one on the cage &the back of the base

Can refer to @24:45 part of the video

hi there is no limit to how many base you can connect , and the back panel is about 15cm heigh , so having 2 floors will be around 30cm usually ppl go max of 3 floor because there are not many kit taller than 45cm. If you have further question can message me directly on my IG same user name

I bought from my local hobby store. Is a resin copy .. but if you can find bandai original one is call "ms builders parts figure #01"

@@K.buildingthings i tried, but the Bandai models always run out of stock. You are from Malaysia right? I am from Malaysia too

pleaseee

Oh then you can get it from Hobby store www.thehobbystore.my/products/bandai-builders-parts-hd-1-100-ms-figure-01

@@K.buildingthings thank you! i have ordered from them, I really appreciate it

For the base since is not something your eyes would focus on. So you can skip the preshade and straight do a base color (this case is black) then follow with highlights (the two shade of grey )

@@K.buildingthings i see ,Thank you very much, thank you for your quick response , have a nice day ^^

@@misakiimoe3037 you can drop me a message on IG I can send you a video.

Oh that I don’t stick on to the base .. is free moving .

@@K.buildingthings i see. Thanks 👍

@@leonk9168 wish I can show you some photos .. but too bad KZfaq can’t attached any

@@K.buildingthings if you used a community post section. You should be able to post picture too like any other social media. Saw other KZfaqr post picture there

I got total of 12 sets , so basic A-H set 1 each and additional 2 F and 1 B 1G, you can mix and match any kind of combination you like as long the wall backing are correct.

Thanks! Now I know what to buy..geez their instructions are downright confusing for me (for fitting 5-6 MG) :D

@@JerickoTejido depends how you plan to lay things out .. for me each block is 15cm x 15cm just nice for a MG . But will look very tight if you put one each . So I only made space for 5 and the rest are for the hangar bay accesories

Thanks mate!

Will ordering 1 decal enough for those?or is it safe to get 2

Nathan i dont really get them from websites. most tool i get from my local hobbystore. but if there is something particular you want maybe i can give you the name rought price you can search it amazon or taobao

Sweet thanks mate Il check out your page looks awesome dude 😎

i believe you can get them from aliexpress. i got them from local hobby store

Sorry What do you mean how do I do it ?? The whole video is how I build it 😂

I'm using mostly Micro SMD LED size 0603 or 0402. Direct to 3v battery power pack .

Remote LED is from those a LED TEA CUP CANDLE SET

Thank you so much. I have micro LED but when I put all 5 it didn’t work.

@@JustForFun-hy9pp what is the voltage been used ? You need 2.5v -3v depending on color .

Mix bro... Lebih kepada anchoreT and Jumpwind

Hand paint , Vallejo metallic & Tamiya enamel