Challenger Star Light Ceiling Install and Meteor 770 Fiber Optics Twinkle DIY Vicrez Star Headliner

Рет қаралды 79,492

2 жыл бұрын

here is a breakdown of my star ceiling install. let me know what you think!!
amazon link to my 710 star kit
www.amazon.com/gp/aw/d/B081R6...
link to smaller 2nd kit with meteor
www.amazon.com/gp/aw/d/B08HYQ...
let me know want you think in the comments ⤵️
SUBSCRIBE
LIKE
COMMENT
SHARE
Subscribe/Like/Comment for future videos on the Challenger and future upgrades with products and reviews.
.
IG @rome_lowlife
FB @rome lowlife
TikTok rome_lowlife
.
Official sponsors⤵️
•AERO Detailing Products
•AADesigns
•Voxx Wheels
•Glassskinz
•BRAUM Racing
•Mobile Weld Specialist (Half cage)
Carismo Domestics
DISCOUNTS⤵️
💵 **% AERO Code. (DM ME)
💵 10% Autoledtech Code (lowlife10)
💵 10% AADesigns Code (lowlife10)
💵 10% Glassskinz Code (lowlife)
💵15% Mobile Weld Specialst Code (romes deal
#dodge #challenger #vicrez

Пікірлер: 107

@lanehurt5812 2 жыл бұрын

Now when you ran the wiring could you leave it connected to the plug in for the cigarette lighter? Bought this kit and all info helps on what I should do for wiring

@LowLifeMods 2 жыл бұрын

You can. What I did was just cut the end off of the cigarette lighter plug. And ran the positive to an inline fuse to a switch, then to the battery. Negative straight to ground. It's DC light box, not AC, so you can go straight to your batter with no need for an inverter

@lanehurt5812 2 жыл бұрын

@@LowLifeMods that would make sense I just want it to turn off and on with the car so leave it like that pretty much was the front piece hard to take off the overhead light etc mines a sedan so I’d hope be easy to get out

@LowLifeMods 2 жыл бұрын

@@lanehurt5812 oh okay, so in your case you will want to probably get a fuse tap and tap one of your powered fuses that activates when you turn the key. Like the fuse for your radio (center stack). I didn't have to remove my overhead light. Stayed attached to the ceiling. The only thing that came off was the handles, hanger hooks, front pillars, and rear brake light. And just loosing up the back side panels.

@Raul-uj5tk 2 жыл бұрын

@@lanehurt5812 most kits allow you to use Bluetooth app to power it off plus the controller that comes with it

@Popkz64 10 ай бұрын

Me aasfkk rn

@bucktownbuddah287 5 ай бұрын

That snap transition was so clean. I wanted to put lights in mine. Thanks for the tutorial my guy!! Great content!!! 💯

@methree3968 Жыл бұрын

I always wondered how those were done! I’m going to attempt this install on my 300! Thanks bro

@SG-wv7qu Жыл бұрын

You done a great job for this to be your first time doing this 👏 👍 🙌 👌 💪

@SeriousLanes 2 жыл бұрын

I thought me installing my air bags was something I fooled myself. This has to be the most patient install and kudos to you brother for tackling it ….. sheeeesh. 🔥🔥 I may want to do now looking at the after.

@LowLifeMods 2 жыл бұрын

Thanks man, appreciate that. 🙏. I'm just glad it's over. I don't see how people do these for a living. 🥵

@derekalexander12 2 жыл бұрын

That is so fire!

@capillarysystem 2 жыл бұрын

The meteor feature is expensive but idc that shit looks so cool, imma get it

@MIKEH.777 2 жыл бұрын

That I know took alot of work & time , but it looks really great I think I was just watching my normal stuff that I watch and then this video came up. I like your video so now I am a new subscriber. Keep up the great work and God Bless you and your family. That's a slick ass car .🔥💯💪🏼👍👍🙏🙏✌😊✌

@LowLifeMods 2 жыл бұрын

That's awesome! Thank you for dropping in and subbing! 🙏🙏. I truly appreciate it.

@YBGMALL 10 ай бұрын

You really wasn’t scared to put a lot of stars that looks insane 😍

@ZeldaFan-vr9jy 10 ай бұрын

Thats so nice

@russellmuscleatl Жыл бұрын

Nice bro🔥🔥🔥

@andrejoseph239aj Жыл бұрын

I’m going to attempt to install in my 2011 Camry LE

@bigrob1101 Жыл бұрын

Good shit bro!

@2747magnum 2 жыл бұрын

good job man!

@LowLifeMods 2 жыл бұрын

Thanks man, appreciate it 🙏

@rkkustom 2 жыл бұрын

Damm that was a very technical install , came out dope tho

@LowLifeMods 2 жыл бұрын

👌. Thanks, very time consuming for sure

@abuddha20ify 2 жыл бұрын

Hell of a job! Looks great! Ill drop off my car to you 🤣

@LowLifeMods 2 жыл бұрын

Never again man! 😂

@nimster64 Жыл бұрын

Good video I Missed the part of what tool you used to poke the holes

@ralpperez1319 2 жыл бұрын

Do you have a video on how you remove the headliner?

@FirestickJay 2 жыл бұрын

Looks good. I do a few of these a week. You can either remove and re glue the blue foam blocks or poke right through them so you have no dead spots 😉

@LowLifeMods 2 жыл бұрын

Thanks. 🙏. Thought about it, but just more work than I wanted to do. 😂. I removed the bigger rear ones, but was fine with the spacing in the end. I went right up on the edge of most of them. Props to you man, I have mad respect for people who do those on the regular

@kealadavey8671 2 жыл бұрын

Hey, I tried this, but ended up not having enough fibre optic length to hide the light engine if that makes sense, could you suggest and tips or help? 🙏🏼🙏🏼

@FirestickJay 2 жыл бұрын

@@kealadavey8671 I did mine twice first time was a 9ft one so I hid light engine in back window behind head rest. Second time 13ft worked perfect now its in the trunk.

@TomikaKelly 2 жыл бұрын

How much does something like this cost in your city?

@Cyprus.s 2 жыл бұрын

What’s the best way to wire them bro?

@bashmorningstar8305 2 жыл бұрын

It's about to do the same thing to my car I was wondering do they have all of those features in one kiit

@NEMPLS 2 жыл бұрын

Thanks for the video. My set just came with only Chinese instructions. Took me a minute to figure out how meteors are suppose to install. It's gonna be ALOT of work but definitely doable in my camaro.

@LowLifeMods 2 жыл бұрын

Nice man! Yeah, it's one of my favorite Mods now that it's done. 😂. I ended upr running my power wires to a small switch in my center consol so I can toggle them on and off whenever

@NEMPLS 2 жыл бұрын

@@LowLifeMods yup after watching that's same place I'm gonna run it to. I don't think I'm getting headliner out of car tho so I'll remove seats, drop ceiling and do it inside the car. Kind of sucks but it is what it is.

@LowLifeMods 2 жыл бұрын

@@NEMPLS really!? It's going to suck to have to do all that work in that confined space. Check online to see if people with your car are able to pull it out. Some of them, like mine, challengers, have some flex in them to bend them to get them out, but go back to their shape

@NEMPLS 2 жыл бұрын

@@LowLifeMods I've only found one video where they took it out but didn't really show how. I know he had a sunroof. Not sure if it makes it more flexible. Waiting on his reply. I'm not starting it tell next week regardless. Your shit looks good tho. You did a really good job explaining compared to alot of other videos I've seen.

@LowLifeMods 2 жыл бұрын

@@NEMPLS thanks man 🙏. I try. Good luck on your project 😁. It will be worth it in the end

@JonathanHernandez-sr9ml Жыл бұрын

how did you order the shooting stars? I know it's 3 in the front and two in the back but out of all the shooting stars, which is being activated first? Going to take on the task of installing them myself

@maliknickelberry4087 Жыл бұрын

Is the wire for cigarette lighter switch long enough to go from the back to the front to plug it in.? I want to do this but don’t know how to wire so I want to just use the cigarette lighter button

@1stingmusic357 2 жыл бұрын

Is that 720 enough for like a suv|station wagon?

@gamingempireofficial5780 Жыл бұрын

Looks great man how long did it take to do it

@Ttgsuave Жыл бұрын

What is the proper way to do the meteor effect I don’t know the pattern/layout Help asap

@michaelmalone7471 2 жыл бұрын

Haha I’m glad I have old regular cab truck the headliner is like 1/4 the size of yours 😆

@LowLifeMods 2 жыл бұрын

😂. Lucky!!!

@theorock3446 2 жыл бұрын

Did you use a ruler or by eye?

@ed_rt 2 жыл бұрын

wow bro that's bad ass, great video love the process this is going to be my guide when I start doing mine, by the way how you placed them did you make up the pattern yourself as you go or did you mark it?

@LowLifeMods 2 жыл бұрын

Made it up as I went. Just broke it up in to sections to make it balanced

@melvinflagg8138 8 ай бұрын

That’s hard

@mdecker0420 2 жыл бұрын

Love it bud!! I'm wanting to do the same to my car... my biggest fear is fucking up the headliner getting it out and then back in the car!! How did you get it out and in without creasing it?

@LowLifeMods 2 жыл бұрын

It has a little flexibility to it. As long as you have 1 seat out and lay the other one all the way back it isn't too bad. Even easier if you have a 2nd person to help guide it from the otherside to minimize folding it more than needed

@mdecker0420 2 жыл бұрын

@@LowLifeMods awesome bud, thanks!

@AlanTrades 2 жыл бұрын

If the led core ever burns out is it replaceable? Doe sit draw alot of current? Can you wire it directly to your parking lights?

@Raul-uj5tk 2 жыл бұрын

I’d wire it to the fuse it’s way better and yes you can replace the main box if it ever goes out the fiber optic disconnects from the led box

@ridinoutlaw 2 жыл бұрын

Looks awesome!!! What did you cut fibers with so as not to cut into headliner? Thanks for the inspiration!!

@abbiravindhran8424 Жыл бұрын

flat cutting plier should work

@cameronhartline3433 2 жыл бұрын

Hey I was wondering couldn’t you connect the starlight directly to the battery without out using the toggle switch and use the app/remote to turn it off/on instead? Thanks !

@LowLifeMods 2 жыл бұрын

Definetly you can. This is what works for me. My car parks for extended amounts of time, so I didn't want the possibility of the box draining my battery if I didn't move the car for a long time

@cameronhartline3433 2 жыл бұрын

@@LowLifeMods Oh okay that makes sense too. Thanks for the advice!😈💪

@cameronhartline3433 2 жыл бұрын

@@LowLifeMods Correct me if I’m wrong but you used the larger pieces at the driver/passenger area then used the smaller ones for going towards the back ?

@LowLifeMods 2 жыл бұрын

@@cameronhartline3433 no, i show in the video. I broke the stands up by size close to even, and sectioned off the roof in to 1/8ths. So I applied them randomly in each section, but each section got the same number of sized fibers

@bigredlibra 2 жыл бұрын

Did you just have the drill bit in your hand and push it through, or what did you use to poke the hole?

@LowLifeMods 2 жыл бұрын

I show it in the video

@Raul-uj5tk 2 жыл бұрын

You can use a thumb tack worked best for me perfect snug fit and you won’t damage the headliner

@excesshorsepower6395 10 ай бұрын

19:53 that's what she said

@n55tourist32 2 жыл бұрын

amazing results and good work! I'm looking at the 800 piece version, but my girlfriend says it's way too many and I should go for 550 with a similar sized roof. what do you think?

@Raul-uj5tk 2 жыл бұрын

What car do you have I did it on my 350z and the 550 was perfect wasn’t to little or way to much if it’s a sports car I recommend the 550 strand trust me you’ll be more than satisfied

@n55tourist32 2 жыл бұрын

@@Raul-uj5tk BMW F32 coupe, also a sports car. I think I'm gonna go with 550 - 600! Thank you very much :)

@missyrae-l3620 Жыл бұрын

Did u have to order anything extra that didn’t come with the kit ..wires etc?

@n55tourist32 Жыл бұрын

@@missyrae-l3620 sometimes wires aren't included, depends on the kit. I'm in europe and bought the CHINLY one. Bluetooth 16 W, 550 wires x 0.75 mm wide x 4 m long. but haven't installed it yet. this kit includes everything though

@missyrae-l3620 Жыл бұрын

@@n55tourist32 Europe wooooowwwww !!!! Nice 👍 thanks !!!

@Gavin-III7 Жыл бұрын

1. what are the dimensions for the challengers headliner? 2. what was the tool you used to poke the holes/did you glue the lights and if so what type of glue did you use? 3. if I used the Y adapter on a 10A fuse with a 7.5A going out would It burn up the wire? I would assume that the draw from those two utilities would be to much the 18 AWG wire including the small fuses.

@Offical.DoubleAce Жыл бұрын

2 u can just use a needle the ones that looks like a T or a drill but the drill will make the fabric stick out the headliner 3 u can plug it into a cig lighter if u have one not sure abt the fuse stuff i didnt hook mine up like that but im sure theres hellas yt vids

@Gavin-III7 Жыл бұрын

@@Offical.DoubleAce I did my starlights about a week ago, it came out amazing. Thanks for the tip g

@EnderWarriorzBruh Жыл бұрын

@@Gavin-III7 what did you use for the holes and what size

@Gavin-III7 Жыл бұрын

@@EnderWarriorzBruh I used a drill bit sized 1/32, it’s incredibly small, but I don’t recommend it because it’ll Frey the headliner just by a little bit and if you aren’t careful you can leave little bumps on the headliner from the drill as well. Fibers I went with are .75mm* 1100pcs* 4m*

@Jt-ed8po 2 жыл бұрын

yo how is it with dark tints driving at night? Can you see still?

@LowLifeMods 2 жыл бұрын

I have 5% all around. When I'm driving with windows up at night, I normally turn down the brightness because of glare. If front windows are down then it's all good

@arthurharris4367 Жыл бұрын

I wanna get them they charging me $2,000 for everything tho

@gilhernandez605 2 жыл бұрын

How did you connect to 12v DC?

@LowLifeMods 2 жыл бұрын

Check my response to the pinned comment

@quanthedom6595 2 жыл бұрын

Where you live bro. I would love to bring my Camaro to you

@Dgektuh 2 жыл бұрын

How did you take out the headliner??

@LowLifeMods 2 жыл бұрын

It's fairly flexible. After unscrewing everything from the ceiling, once it drops down, it's just a matter of manipulating it put one of the doors. I had my passenger side door open, it took some guiding and slight folding, but it came right own. Just don't bend it anymore than you need to.

@jasonyi7300 2 жыл бұрын

Did u count all the dots u made

@LowLifeMods 2 жыл бұрын

Definetly not. But every fiber had a home. I show in the video my process

@jamessalgado479 2 жыл бұрын

I’ve had so much trouble taking mine out I couldn’t figure out how to do the back panels

@jamessalgado479 2 жыл бұрын

Was hoping you’d show it in the video

@LowLifeMods 2 жыл бұрын

@@jamessalgado479 to be honest. I didn't find that too hard. That's why I didn't even bother recording it. But I have also removed those panels in the past. If you look up "workplaydrive" he shows it in a video he made a while back. The title was something like "challenger rear interior panel removel"

@jankycustoms6089 Жыл бұрын

Whats the app name

@robriche7505 2 жыл бұрын

Urs isnt blue tooth no convertor either ?

@LowLifeMods 2 жыл бұрын

It is bluetooth. I left links to the kits in the description of this video if you want to check out the specs

@mannyzepeda3334 2 жыл бұрын

I just got an estimate for 2000 bucks for a 1000 star install . Is that good price.? Anyone know ?

@gamingwithbre Жыл бұрын

2000$ hell no

@raymondjoseph7177 2 жыл бұрын

It's not being cheap when you know you'll end up doing a better job. Shit man i can't even get old. I'm 52 tired of laying down under shit. But I have to. Sent my van for brakes last month figuring, fuck it ill pay 300 for the rear drums. I didn't want to do them. They smoked last week. Shop's "new guy" didn't know there's a front and rear shoe and put 2 fronts on one side and 2 rears on the other. Got my money back and did it myself. That's not cheap. It's frustration of trying to find capable humans.

@maxxpayne309 2 жыл бұрын

Can you do mine 😆

@LowLifeMods 2 жыл бұрын

Shoot...I didn't even want to do mine. 😂

@maxxpayne309 2 жыл бұрын

Dam 😆

@mrpotatoehead7856 2 жыл бұрын

@@LowLifeMods Hey I'm doing mine at the moment, almost done just 500 with meteors only 96 strands on those ,how far apart did you do meteor part ,I'm doing that last I think my meter layout maybe to close like 3/16 inch. I guess I should layout on cardboard and experiment widths unless you could tell me .