Change Boulevard M109R Engine Mounts

Рет қаралды 10,820

Biker Dan

4 жыл бұрын

A video on how to change the front engine mount on a Suzuki Boulevard M109R or BOSS.

Пікірлер: 30

@abeastrules Жыл бұрын

Thanks Biker Dan. This video has inspired me to change my own motor mounts in my 2007 M109R. I changed out two for now, the front one and the one under the seat. The bottom one will be a spring event. Thanks for the details in this video.

@ridermotorman1320 4 жыл бұрын

Dan you doing great job and great video 👍👍👍👍

@rajpauldhaliwal3537 4 жыл бұрын

Great video.... need to do mine so this helped a ton!

@herclepeters3769 2 жыл бұрын

Great video! Thank you!

@biker_dan 4 жыл бұрын

An update. I later changed back to soft mounts as the hard ones caused too much vibration. My advice is go soft.

@jaybourbon8608 2 жыл бұрын

Did you use the OEM rear mounts in place of the fronts, or aftermarket the first time?

@biker_dan 2 жыл бұрын

@@jaybourbon8608 was OEM mounts

@kaize111 3 жыл бұрын

Excellent video

@Aussiebloke-59 3 жыл бұрын

Thanks for sharing Dan

@suntzuwarsword1964 4 жыл бұрын

Thank you..great video...

@stevemcmullen4100 Жыл бұрын

Great video,have you ever replaced the rear mounts.Any advice would be appreciated

@blackbird69xxx 2 жыл бұрын

I have a 2011 model with 15000 miles.. Im not doing this they can stay in till i get to 25000 and then sell it ...... but thanx for the video.. much appreciated Manchester Uk

@DrAlmurshidy 2 жыл бұрын

Thanks Dan for your videos. I have the 2014 and I was wondering if I need to change them, I bought it with 7000 miles (~11000 km) and I just added a 1000. Is there a recommendation for the intervals? Also regarding the spark plugs in your other video, why Suzuki wants us to change the plugs every 7500 miles (~12000km)? I have never experienced such a short interval.

@biker_dan 2 жыл бұрын

I think you can tell when the mounts need changing, when you accelerate and decelerate of and on you can feel the engine move excessively. I think with your low milage yours will be fine. As for spark plugs, using a standard you should get 20000k easily. If you use iridium they can last up to 100000k although I would only let it get to 75000k max.

@owenrichardson3026 4 жыл бұрын

Hi Dan, Since doing the mounts has there been any dramas ? did you notice a change in vibration after? are you happy you did the change out ?

@biker_dan 4 жыл бұрын

The harder mounts gave much more vibration so I changed them again for soft ones which are better. My advice is use the soft ones.

@jaybourbon8608 2 жыл бұрын

I'm trying to find the part number for the rear rubber mounts you used for the front.

@jaybourbon8608 2 жыл бұрын

Here I'll answer my own question. This is the part number for the rear mounts to use in the front OEM Suzuki part # 11652-10G30

@pontiaco 3 жыл бұрын

do I need to replace the long motor mount bolts too??

@biker_dan 3 жыл бұрын

No just the mounts

@cadillacescalade1 3 жыл бұрын

HI are these engine mount rubber? how to know if they should be replaced ?

@biker_dan 3 жыл бұрын

Yes rubber. You will feel the engine rock between gears.

@jaybourbon8608 2 жыл бұрын

What were your symptoms? My clutch lever slack tightens up when I give it gas to where my clutch lever gets tight. Would that be the engine mount?

@michaellewis9589 Күн бұрын

Thats happening with mine too. I heard it was normal but wondered if a worn engine mount could dramatize the effect. Any updates?

@jambam6176 4 жыл бұрын

1:29 Do you know of any engineering reason that Suzuki made the front mounts softer than the rear.

@biker_dan 4 жыл бұрын

Less vibration, I later changed mine again for softer ones again.

@patrickschuchardt648 4 жыл бұрын

Wish I knew what you are saying, but otherwise great video.

@LarsNaesborg Жыл бұрын

Just job 33% done, you need to change all 6 mounts, they are all worn out from 40.000-50.000 kilometers. Typical people dont change the lower rear ones because theese are most difficult.