Change Toyota Oil and Filter 2012

Change Toyota Oil and Filter 2012 - 2017 Prius V

Рет қаралды 44,715

Жыл бұрын

This video shows a few tips and answers common questions relating to changing the oil and filter on many Toyotas. The oil resets and capacities are specific to the Prius V shown in the video. The filter removal and replacement process is common to many Toyotas including the 2010 - 2015 Prius, the Prius V, 2009 - 2016 Corolla, Lexus CT200h, Matrix, Scion xD and others.
2:43
To get the job done:
Lisle Forged Steel Filter Wrench: amzn.to/3GpfbwQ
Capri Forged Filter Wrench: amzn.to/32bMbpp
EWK Forged Filter Wrench: amzn.to/3j9Dp3l
OEM Tools Filter Wrench: amzn.to/3mfUxXD
Filter Housing Genuine Toyota OEM: amzn.to/2T7GKG3
Filter Housing Plastic: amzn.to/3cjxTuP
Filter Housing Metal (no Drain Plug): amzn.to/3SXhEo1
Filter Housing Metal (w/Drain Plug): amzn.to/3kevRun 27mm
Impact-grade Socket for most cap wrenches: amzn.to/31OmMkr
27mm Impact Deep Socket: amzn.to/3iEUaRu 27mm
Low Profile 27mm Socket: amzn.to/3lI19xU 3/8" & 1/2" Drive Impact Extension Set: amzn.to/3Yq69qi
Undershield clips:
-Large clips: amzn.to/3iCfXZQ
-Small: amzn.to/3kC4zz4
Impact Wrenches with at least 300 Ft-Lbs of Torque:
Power Impact wrench in video (300 ft-lbs) (18V) Full Kit: amzn.to/3Gp58r4
Impact wrench in video (tool only): amzn.to/33U0Yq0
Best batteries for above Impact wrench: amzn.to/3KPsKaj
DeWalt Brushless Impact Tool 700ft-lb (best): amzn.to/3HeWviQ
DeWalt Power Impact Tool w/330 ft-lbs (20V): amzn.to/3h5wuVO
DeWalt 20V Battery/Charger Kit: amzn.to/33REIzM
Impact Tool w/300 ft-lbs (20V): amzn.to/3iMsBFY
Plug-In Power Impact Tool w/450 ft-lbs (110V): amzn.to/2CuJUvw
14mm drain plug socket: amzn.to/3gRmpeZ
1/2" drive ratchet: amzn.to/33Pqs8d
3/8" ratchet: amzn.to/31KaBVH
Click-Type Torque Wrench: amzn.to/3amnqtg
Complete Socket Set includes 14mm and 3/8 ratchet: amzn.to/33VjjTF
Toyota OEM oil filter: amzn.to/30Nr3VZ (Confirm for vehicle)
Toyota Drain Plug gasket 2-pack (Dorman): amzn.to/35kvo5v
10-Pack Drain Plug Gaskets: amzn.to/35y3QKn Mobil1
0W-20 Synthetic Oil for Prius: amzn.to/3fSrMcO Mobil1
5W-30 Synthetic Oil: amzn.to/33YkCBo
You Might Also Need:
18" Breaker Bar: amzn.to/3bUbsrC
24" Breaker Bar: amzn.to/3gPO7ck
6-Ton Jack Stands Pair: amzn.to/2QqMr0z
Floor Jack: amzn.to/33XD6BW
Oil Drain Pan: amzn.to/3fWwUwD
PROTECTIVE GEAR:
Face Masks: amzn.to/3D0zCiW
Safety Goggles: amzn.to/3fZQfNq
Ear Protection Ear Muffs: amzn.to/3QOBMrq
Ear Plugs: amzn.to/3CZJHfR
Shop Gloves: amzn.to/3aGzAgV
Nitrile Gloves (6-mil): amzn.to/3awjyWQ
Other Prius Maintenance Videos:
Remove/Install Glove Box: • How To Remove Upper Gl...
Remove & Repair Prius V Retractable Cup Holder: bit.ly/30i0pUr
Fix Sticky Console Buttons: bit.ly/3jeGH3B
Remove Stuck Oil Filter: • How To Remove Stuck Oi...
Install Fog Lights On your Prius: bit.ly/3cF97Rz
Change Transmission Fluid on a Prius (EASY - No Pump Needed!): bit.ly/30iXRFw
Change Your Prius Cabin Air Filter in 2 minutes: bit.ly/3kXiuiE
→ Become a ScubaMoto Subscriber - goo.gl/iAwSQc
→ If this video helped, please give a thumbs up and subscribe for future videos
→ As an Amazon Associate I earn from qualifying purchases at no extra cost to you. Win!
→ Business Inquiries email: scubamoto@outlook.com
→ Support this channel - goo.gl/iAwSQc

Пікірлер: 44

@hughmorris2008 Жыл бұрын

EVERY SINGLE DIY VIDEO ON THE INTERNET NEEDS TO BE EXACTLY LIKE THIS ONE!!!! (he shouted with excitement!)

@ScubaMoto Жыл бұрын

I'm glad you think so. Thanks for the great feedback.

@TheFatbutterpancake Жыл бұрын

Definitely one of the better dawn videos on Prius maintenance

@ScubaMoto Жыл бұрын

Glad it was helpful. Thanks for the feedback.

@dinosaurtimesten Жыл бұрын

Excellent content. Articulate and well shot. Seriously appreciate it.

@ScubaMoto Жыл бұрын

I'm glad you like it. Thanks for the feedback.

@ZanZ-qi6wz Жыл бұрын

Great Video for me as beginner! hardest part for me is to remove the oil filter and figure out which part to jack the prius.

@ScubaMoto Жыл бұрын

If your filter is tight, hopefully a breaker bar will be enough using a 27mm socket on the wrench lug as shown in the video. But I think you saw my other video using impact to remove a Prius oil filter that was severely over-tightened. It's a last resort, but it worked. As for jacking it up; some hybrids are harder to get in the air (like the Ford Fusion Hybrid ). Fortunately the jack points are easy for the Prius Wagons like the one in the video (Prius V). There is one front and center and another one rear center between the wheels. Once it's up, it's jack stands under the frame.

@pierrickhanlet4376 Жыл бұрын

This is honestly the best help video I've watched. It is accurate and to the point. Thank you.

@ScubaMoto Жыл бұрын

You're very welcome. Thanks for the great feedback.

@76tigga 27 күн бұрын

I like the dipstick hack trick to read the oil level. 0-20 weight oil is so hard to read on a dipstick when the oil is fresh.

@ScubaMoto 27 күн бұрын

I'm glad it helped. Thanks for sharing.

@kboy355 4 ай бұрын

This was so helpful with the steps and hints along the way. Thank you!!

@ScubaMoto 4 ай бұрын

You're welcome. I'm glad it was helpful.

@Stefan1978GER Жыл бұрын

Thanx from germany. Great help.

@ScubaMoto Жыл бұрын

Of course. Thanks for the comment.

@HeiderSati Жыл бұрын

Great Video, thank you very much for your time making it.

@ScubaMoto Жыл бұрын

So glad it helped. Thanks for the feedback.

@Paccman08 Жыл бұрын

Carnal eres un profesional explicando y mostrando las cosas Muchísimas gracias Sigue haciendo las cosas así de bien y triunfarás en la vida

@ScubaMoto Жыл бұрын

Me alegro de que el video haya sido útil. Gracias por las amables palabras.

@nutsnbolts76 7 ай бұрын

Excellent video!

@ScubaMoto 7 ай бұрын

Glad you liked it. Thanks for the comment.

@AnonymousV4 9 ай бұрын

Thanks for the great tutorial. Just bought a Prius and changed the oil for the first time. You weren't kidding with the over tightened filter, was able to move the engine before it came off and busted my knuckles. There's even a warning on the new filter not to over tighten...

@ScubaMoto 9 ай бұрын

Glad it helped and congrats on getting the filter off. Now that you're installing it, it will never get over-tightened again. 👍

@robertlovesgothgirlz 4 ай бұрын

Thank you!

@nubetoob9292 Жыл бұрын

Nice buddy.. real nice.

@ScubaMoto Жыл бұрын

Thanks 👍

@charlesincharge.5161 5 ай бұрын

GREAT VIDEO GREAT KNOWLEDGE.📡🇺🇸👽thank you sir.

@ScubaMoto 5 ай бұрын

I'm glad it helped and thanks for the comment.

@simonesnailsshop927 Жыл бұрын

thank you

@ScubaMoto Жыл бұрын

I'm glad it helped.

@gertsch6216 Жыл бұрын

Compliment, great explanation. You are a professional without pointing it out, but many details in the video show me. I wanted to know what brand of oil you use ;-) . Thanks for the good explanation. Greetings from Austria, Gerhard

@ScubaMoto Жыл бұрын

Thank you very much for the kind words. My personal preference is the oil in the video (Mobil 1) but most synthetics are fine as long as you don't wait 8- 10K miles between oil services. Thanks for sharing.

@bobpowers6239 Жыл бұрын

Just watched your clip on the Toyota Prius The filter cap remover looks look a good one my I ask wear you purchased at?

@ScubaMoto Жыл бұрын

I bought it online 5 or 6 years ago for less than $20. My local auto parts outlets also usually have one on the shelf. These wrenches are usually priced between $10 and $20 but I have seen them at NAPA and other places for a lot more. I put some of the better reviewed ones in the video description if that helps get you started. Thanks for the question and good luck with it.

@bobpowers6239 Жыл бұрын

Yeah I have one that bought a auto store but seem cheaply made. Yours in the clip looked a little more beefer. Got a filter cap that may need a impact

@edwardhernandez-rivera5957 6 ай бұрын

0:39 how often to do we need to change the drain plug gasket. Every time we do the oil change?

@ScubaMoto 6 ай бұрын

Each time is the design intention but plenty of quick shops reuse them at least once. The drain plug torque setting provided in the video is calibrated for the drain plug gasket compression. The gasket takes the brunt rather than the drain plug threads. So it protects from leaks and protects the threads. When they're reused many times, it takes more torque to get a good seal. That's when very sad souls are at risk of damaging or stripping the drain plug threads. I buy them in sets for pretty cheap. It often comes to less than a dollar ea. If you were standing here I'd hand you one. They're a minor part of the oil/filter change cost. I hope that helps.

@edwardhernandez-rivera5957 6 ай бұрын

@@ScubaMoto thanks this info really helps