Change Your Turbos At Home! | BMW N54 335i Turbo DIY

  Рет қаралды 366,611

Vehicular DIY

Vehicular DIY

5 жыл бұрын

In this video I show you how to change your turbos on you N54 powered BMW! I'm working on my 2008 E90 335i. I install a set of Dynamic Autowerks Turbos.
You can purchase the upgraded turbos here (affiliate):
ebay.to/2T78xUu
If you want a set for the 1 and 5 series (affiliate):
ebay.to/3hCUnVG
They're good for north of 500 WHP without breaking a sweat.
These are claimed to be the same or better than Pure stage 2 turbos.
These are put together in the USA via a company called Dynamic Autowerks based out of Michigan. They've been in the turbo business for a number of years.
Here is a forum thread discussing these turbos:
www.e90post.com/forums/showth...
You can purchase an install kit here (affiliate):
bit.ly/2LhTbtL
You can buy the 2" inlets from VRSF here:
www.vr-speed.com/vrsf-oem-loc...
I do this job at home on the floor with a floor jack and regular tools. Plan to set aside an entire weekend to get the job done. It's not difficult just time consuming really.
This installation DIY will apply to E92 and all E9X models, it would be similar for the E87 135i or E60 535i.
Now days quality upgraded turbos are cheaper than replacing your OEM turbos. You can save some money and make over 500 WHP! Hopefully this video inspires some people to consider replacing the turbos on their car instead of paying a shop.
Subframe Removal video: • Every E90 Owner Eventu...
Thanks for watching, if this is the first video you're seeing of mine consider subscribing. I upload regularly. When you see the word "affiliate" listed beside any link in my description please know that this is a custom link and I will earn a small commission if you opt to purchase using said link. This is at no extra cost to you so it's a win all around :) Thank you!

Пікірлер: 513
@Gendo3s2k
@Gendo3s2k 5 жыл бұрын
Even though you mentioned another video about the subframe, you should probably at least mention that you need engine support to hold up the engine while you pull the frame. Some guys may opt to skip the other video and assume that this video is enough
@VehicularDIY
@VehicularDIY 5 жыл бұрын
Yeah, I pinned this comment to get the attention of anyone watching so they know to watch my other video first.
@BlackHoleStudio
@BlackHoleStudio 4 жыл бұрын
@@VehicularDIY Good point you should annotate the video at that time to let people know. KZfaq should allow you to edit a text or a link
@TheCloser1
@TheCloser1 4 жыл бұрын
Vehicular DIY just wanted to add, you can remove the subframe assembled and save a lot of time. Hang calipers, disconnect power steering hoses and shaft, and drop struts from tower. Granted I had a trans jack for this but I could imagine a 2x4 jig on a floor jack will get it. Great diy thanks
@Delight.AutoCRAFT
@Delight.AutoCRAFT Жыл бұрын
He did mention it
@jason.arthur.taylor
@jason.arthur.taylor Жыл бұрын
@@TheCloser1 Can you give more details about this? Is there a video? Are you saying you can remove the subframe before you do anything else? Or, are you saying you can remove the subframe permanently?
@shawzymusic
@shawzymusic 3 жыл бұрын
For anyone wondering: this is absolutely worth it. It transformed my car. My stock turbos were weak, only being able to hold 12psi at 17 target. After installing these, it targets 19.5 and holds 19+ and even breaks 20psi. Even without a tune, it's insane what these turbos did for my car. Highly recommend. Also, if you're a semi-novice like me this job will take you 5-6 days if you spend 4+ hours on it daily. I did it from jack stands in my driveway, having to go back and forth from the auto parts store for certain tools. It's very gratifying knowing I did it by myself and saved $3,000 by not paying an indie shop.
@sebaj8386
@sebaj8386 2 жыл бұрын
It’s always worth it, price and labor is the reason why ppl don’t do it. BMW is 100% for the mechanically inclined crowd.
@AnthonyGonzalez-zy5zm
@AnthonyGonzalez-zy5zm 11 ай бұрын
What turbos are they?
@firstlast4874
@firstlast4874 9 ай бұрын
@@AnthonyGonzalez-zy5zm Dynamic Autowerks, but they no longer sell N54 turbos
@lukewedlock7105
@lukewedlock7105 7 ай бұрын
is your car less reliable now
@maxly501
@maxly501 7 ай бұрын
​@@lukewedlock7105how would it be less reliable when you putting stronger turbo's?
@darth_art2101
@darth_art2101 2 жыл бұрын
Just knocked out my turbos, along with a bunch more from this channel. Keep up the videos. Thank you
@hossamibrahim2904
@hossamibrahim2904 5 жыл бұрын
I was checking the KZfaq every day since the reviews to see if you upload this video. Great job man your videos are awesome can't wait to see dyno numbers
@BoostieBadAss
@BoostieBadAss 5 жыл бұрын
Man I learn so much from you! You have no idea how much confidence you give and how much you help us. Even though I have a N55 I still find your stuff very helpful!
@fackamato
@fackamato 5 жыл бұрын
I don't even have this car or a need to swap turbos, but I watched the video anyway. Great mix between showing/talking/explaining and not being boring. Keep it up!
@willjay9808
@willjay9808 5 жыл бұрын
I watch n54 video repairs religiously, read forums, and do the work myself. I was surprised I hadn't seen this video... Then I saw it was uploaded just 2 days ago! Good video, keep 'em coming!
@sharkfinn8091
@sharkfinn8091 3 ай бұрын
I just got into the N54 scene and trying to learn all there is about it. This is very informative. Great video!
@kevinsinor2821
@kevinsinor2821 2 жыл бұрын
All of the positive comments on this video are incredibly well deserved!! This is a very clear and concise style of instruction that is lacking in so many instructional videos out there. Nicely done! I’ve referred to your videos many times and I cannot tell you how much they have helped, even for someone who has worked professionally as a mechanic, so I thank you. This diy is next on my list. :)
@Lamppu69
@Lamppu69 5 жыл бұрын
Great tutorial mate! I have this project ahead of me so I'm sure gonna go step by step with this. Keep up the great work!
@1supratech
@1supratech 5 жыл бұрын
Great video as always. Thank you for taking the time to make this for us. 👍
@justjoshn5468
@justjoshn5468 2 жыл бұрын
videos like this need a super like button... the amount of time an effort put in to make a detailed how to deserves more! ty
@markd4488
@markd4488 3 жыл бұрын
Doing my 07 e92 140,000 miles with CCP T17 upgrade now. Damn good reference! There's a lot to do, new water pump/thermostat, upgraded PCV/vent hose, charge pipe/CCP BOV, engine mounts, 2" inlets, and MHD stage 2 tune. Still need a larger FMIC to go 2+. Thanks for your guidance!
@Creampie_lake_zaddy
@Creampie_lake_zaddy 3 жыл бұрын
Another excellent video. You have helped me learn so much, and saved me thousands in labor. I’m checking your affiliate links now to show some support.
@TheRealHypervizor
@TheRealHypervizor 5 жыл бұрын
Hell yeah brother! VRSF!!! I just got the aluminum inlet set. Can't wait for my new turbos to get to the house so I can literally do the exact same thing you're doing.. lol
@misterp4047
@misterp4047 4 жыл бұрын
Hey I order them olso from Dynamics Autowerx. Your installation video has help a lot, thank you for that. Can't wait for the first start. Hope to do this today or else tommorow 👍🏻
@Vgk36
@Vgk36 4 жыл бұрын
Just bought a 335i n54 . Doing all my research on this platform. This good sir is an EPIC video. I'm not a content creator but the way you make your videos is the way they should all be done 💪🙌🙌🙌🙌 . You are literally mentioning every single fastener size as you go along and also mention when you buy certain tools help the job go smoothly. Thank you for posting this and ALL your other Bmw videos .
@ThatNofbody
@ThatNofbody 2 жыл бұрын
How’s that 335i now still own it? 😂
@SS-bp8wn
@SS-bp8wn 5 жыл бұрын
I bought these with your affiliate link, hope it helps the channel. Great job as always, I will let you know how it goes on my 2007 E93.
@VehicularDIY
@VehicularDIY 5 жыл бұрын
Thank you, it does. I've been putting any affiliate money back into gear, like better cameras, lighting and audio solutions.
@johncadogan9450
@johncadogan9450 Жыл бұрын
I have had a 335i now for 15 years upgrades over the last 7 years are Td0 4 turbos at 18 psi FBO LTD diff full seal kit in auto runninnig MHD and XHP stage 3 upgraded full pump and modified fuel pump driver with cooling fan dyno's at 550 reliable HP , and have never used E85 the main killer of reliability in these engines. at 1350KGs and a very stock looking E90 those Mustang and Dodge boys sure get one hell of a shock when this little old man is looking at them in his reaveiw, what a buzz, the most realiable and fun car I have owned, and I have owned a lot of muscle cars in my 50 years of driving.
@jasonspitzley1004
@jasonspitzley1004 4 жыл бұрын
My son ordered these for his 135i about the same time. You did however beat us getting them on. To say the least we have been impressed. Nice power band that doesn't overwhelm the drivetrain ( pump gas 93) have you seen many datazap's of these cause it is adding up to be some incredibly strong numbers.
@colin55594
@colin55594 3 жыл бұрын
On the floor doing this as we Speak. Thanks for the video m!
@Andy-cp6fb
@Andy-cp6fb 4 жыл бұрын
Great video thank you keep up the content best N54 on the net!
@LMLracing
@LMLracing 5 жыл бұрын
Saving up for this turbos thank you
@KHU83
@KHU83 5 жыл бұрын
Great Job! Enjoy watching your video. The little details means a lot in DIY. I ll love to see more N55 videos.
@VehicularDIY
@VehicularDIY 5 жыл бұрын
Thanks! I bought a higher mileage X5 with the N55 thinking it'll act up and I'll make a bunch of content on it, it's been reliable after working out a couple kinks so I need to start modding it to make some content.
@KHU83
@KHU83 5 жыл бұрын
I bought 2015 X5 ,m-sport after watching one of your video on your X5 F15. I have a couple of retrofit I would like to perform on the car. i. e rear entertainment , dvd, monitor etc. it’s very hard finding BMW F15 DIY online. Keep up the good work!!
@MarchelloHancock
@MarchelloHancock 5 жыл бұрын
Great video brother. One of the most thorough videos of its kind out there. Also, you always have great camera placement and quality. Keep up the excellent work.
@mta3562
@mta3562 Жыл бұрын
Great video. I watched your channel in the past because it very detail and I can I pick thing up easily. I have to come back and watch this video again because the turbos in my car are now bad. It's a smoking machine every time I start and I'm being told is the turbos.
@sigersonholmes7758
@sigersonholmes7758 3 жыл бұрын
Best video I have seen on this subject
@clivechalres4183
@clivechalres4183 5 жыл бұрын
Can't wait see what numbers u get from em am waiting to see as I want a set ....
@tomwills1163
@tomwills1163 2 жыл бұрын
Love your stuff mate. Keep up the great work!
@NatnKadn
@NatnKadn 3 жыл бұрын
Love watching your diy's brotha.
@755hp
@755hp 5 жыл бұрын
You are AWESOME! Thanks for this video man!!✌️😎
@jeffsloane8628
@jeffsloane8628 4 жыл бұрын
A fantastic video! Very well done.
@raullima4431
@raullima4431 4 жыл бұрын
looking forward to your review! thanks!
@JD2.0N54
@JD2.0N54 4 жыл бұрын
This was depressing to watch. To think I'm gonna have to do this one day🤦‍♂️🤦‍♂️
@amberlombera9604
@amberlombera9604 3 жыл бұрын
Yeah bro my day came . Just installing new turbo :(
@thinkingagain5966
@thinkingagain5966 3 жыл бұрын
@@amberlombera9604 a girl installing her own turbos? Yeah okay...
@n3on170
@n3on170 3 жыл бұрын
@@thinkingagain5966 what’s the issue?
@seanwilks7712
@seanwilks7712 3 жыл бұрын
@@thinkingagain5966 Damn my dude, can you be anymore of a douche?
@claudioagmfilho
@claudioagmfilho 4 жыл бұрын
I am from RECIFE in Brazil South America and what a great vid...
@qx4n9e1xp
@qx4n9e1xp 3 жыл бұрын
Thank you for this wonderful tutorial! Straight to the point and clear filming. I feel like I have everything I need now to tackle this. It helps that I've tinkered with a motorcycle before. How much harder can this be? (Especially with resources like this video?)
@pinoysi06
@pinoysi06 4 жыл бұрын
Yo!!! You always have the best DIY🔥
@Ste-sr4fy
@Ste-sr4fy 5 жыл бұрын
I watched a lot of your videos by the way. They've been really helpful. Thx!
@VehicularDIY
@VehicularDIY 5 жыл бұрын
Just figured it would be less straining.
@Ste-sr4fy
@Ste-sr4fy 5 жыл бұрын
Gotcha. 👍
@farmanshaikh6405
@farmanshaikh6405 5 жыл бұрын
Great video 👍 thanks for sharing!
@pilosopo25
@pilosopo25 5 жыл бұрын
Awesome video as always!!!
@siblenmoreno6792
@siblenmoreno6792 5 жыл бұрын
Bro I have 535i 2009 it runs like a beast but I thinking of doing this in the future great video and really helpful well all of your videos are. 👏👏👏👏👏👏👏👏🔥💯BMW FOR LIFE❤️
@j-rockeastwood2013
@j-rockeastwood2013 5 жыл бұрын
Man you did a butt load of work. Awesome
@Tstrick510
@Tstrick510 2 жыл бұрын
I’d love to see a video on how these turbos are holding up. I have the same ones with 9k miles. Bought them from link in description. Pretty wild how far their company has come. They look much more legitimate nowadays!
@vasutaak7907
@vasutaak7907 4 жыл бұрын
Hey can you do an update video on how the turbos are performing?
@christopherernst7408
@christopherernst7408 3 жыл бұрын
+1 I’ve seen mixed results from DAW
@shawzymusic
@shawzymusic 3 жыл бұрын
Mine just got here I'm excited
@quik5ltr
@quik5ltr 5 жыл бұрын
Nice work, can’t wait to see the results and hear your thoughts on these turbos. Props for changing em out without a lift!
@VehicularDIY
@VehicularDIY 5 жыл бұрын
Thanks! I'm on V1 of my initial tune "safe" tune and they already feel wild. The difference in power feels like the difference between a stock 335i and a full bolt on stage 2 335i.
@quik5ltr
@quik5ltr 5 жыл бұрын
Vehicular DIY is the spool still in the same range as the stock turbos or do you feel it has shifted to the right a bit?
@cuttingedgecool7235
@cuttingedgecool7235 4 жыл бұрын
Your videos are golden!
@mrsmooth420productions5
@mrsmooth420productions5 2 ай бұрын
just got my first bmw..ive owned nothing but 4x4 trucks..week after i got it the alternator went out...well that was fun..now i found out it has turbos..the car has 138,000 on it so im assuming its almost time for some new ones....its still the cleanest engine i have ever worked on im now a big bmw fan.
@danielespinosa3723
@danielespinosa3723 Жыл бұрын
Liked & subscribed! Thanks for the informative video. Very appreciated :)
@andrasszita2551
@andrasszita2551 4 жыл бұрын
I love the videos. professional detailed and just a wealth of information. Would it be possible to provide a list of all the hardware necessary for the job, gaskets, studs, nuts, bolts ect. . . . thanks in advance.
@claudioagmfilho
@claudioagmfilho 3 жыл бұрын
I am from Recife in Brazil South American and it’s always a pleasure watching your videos, Are a professional mechanic? You know a lot
@MrFunkyBeatz
@MrFunkyBeatz 5 жыл бұрын
I been tossing up between these turbos or tte600's I'm keen to see your dyno results and thanks for a great walkthrough 😎
@sharifa69
@sharifa69 5 жыл бұрын
Same again 😬
@SaroG
@SaroG 5 жыл бұрын
Awesome video, thank you!
@krisgriffin9090
@krisgriffin9090 5 жыл бұрын
Great video. Thanks!!
@copperlocks1
@copperlocks1 5 жыл бұрын
Truly an excellent tutorial!! Thank You for taking the time ; only thing thing questionable was the use of the G-05 coolant; I would recommend G-48. I used G-05 in 2 seperate BMW cars and had overheating issues (it was not air in the system) ;(or I just suck at car ownership)
@VehicularDIY
@VehicularDIY 5 жыл бұрын
Thanks! Oh yeah? I've been running it for a few years and ran it on my E70 for years also. Haven't noticed any issues, it's just easily available locally and meets BMW spec.
@stormcomilang869
@stormcomilang869 4 жыл бұрын
Man you worked it with ease
@gh-cu1jh
@gh-cu1jh 5 жыл бұрын
Nice video, definitely getting a set of these when mine blow(I'm at 97000 so they have some life left), I just finished buying a set of index 12 injectors for my n54
@Kipitrl
@Kipitrl 5 жыл бұрын
Mine just hit 105k and wastegate rattle just started and slight smoke on decel. They have been tuned since 62k 22psi
@jason.arthur.taylor
@jason.arthur.taylor Жыл бұрын
This is a superb video. The hyperlink to the forum is now bad. Videos like this are why one should purchase a BMR.
@apexholland7427
@apexholland7427 5 жыл бұрын
Great video!
@j-rockeastwood2013
@j-rockeastwood2013 5 жыл бұрын
Dude i watch you videos before i bought a BMW. I got a 2012 335is. You know who you sound like? The guy on the couch from half-baked. Lol no offense brotha! you videos are the truth.
@croracer1987
@croracer1987 Жыл бұрын
Thanks for this nice Video.
@kevensantos7656
@kevensantos7656 4 жыл бұрын
Please release a video update on how the turbos feel, dyno results, and their reliability. I just placed an order for these, but I'm a little skeptical considering it's to cheap to be true. Let us know!
@misteryeah2013
@misteryeah2013 2 жыл бұрын
I love this channel been subscribed for quite a while ever since 2020 when I purchased my first E90. Your content is very useful and helps me decide which jobs I will tackle in my driveway as well as the best way to go about it. This video was great but I can't seem to find the links for the follow up videos of Street pullls or track or on the dyno with this setup before you manual swapped it.. please reply those links if they are available thanks
@josephdanno
@josephdanno 3 жыл бұрын
Thank you for this video and for all explanations, cause I really need to replace my turbos too on my 08 bmw 535xi I can’t drive it this’s almost two years parked on my driveway 😣 after I took it to Many mechanics all they asked higher Price for repairs 😵‍💫
@Lup3r
@Lup3r 5 жыл бұрын
Thanks! Literally got a quote back yesterday on replacing my turbo’s and I was like.... welp. Looks like I’m doing it myself!
@323spy
@323spy 5 жыл бұрын
Luper I did this myself about a year ago and its honestly not as bad as i thought it would be. My best advice would be to use a 1/4 ratchet with 3/8 adapter to remove the bolts around the headers/turbos. This let's you turn the bolts out a lot faster
@chriscipres708
@chriscipres708 4 жыл бұрын
How much were your turbos
@billyowusu48
@billyowusu48 4 жыл бұрын
About to do mine thankfully🙏🏾
@billyowusu48
@billyowusu48 3 жыл бұрын
G Thankfully my turbos were still good. I had multiple leaks( vacuum lines from the turbo it’s self and the intercooler.) Running well now on mhd stage 1 plus 🙏🏾.
@qmarq
@qmarq 3 жыл бұрын
how much was the quote
@davejohnson6144
@davejohnson6144 5 жыл бұрын
Wow what a big ass job!
@inkdot9982
@inkdot9982 4 жыл бұрын
well im going to upgrade my turbos on my z4 e89 thanks to this video. based on this video, it should take me no longer than 20 years to accomplish the task.
@pabloalfaro2595
@pabloalfaro2595 4 жыл бұрын
how did it go lol
@SlikzYT
@SlikzYT Жыл бұрын
Respect to everyone who does this kind of job in there garage. I turn a 1 hour job into 8 hour job because I forget where simple nuts and bolts go.
@russtecauto
@russtecauto 3 жыл бұрын
Thank you for sharing!
@jmayor88
@jmayor88 5 жыл бұрын
Awesome work, both the work on the car and the video! Thank you.
@sixspeedmaro
@sixspeedmaro 5 жыл бұрын
I've been looking at these same turbos cant wait to see how they do for you I want them.for my daily
@BMWI-gk9wh
@BMWI-gk9wh 4 жыл бұрын
Did you get them?
@MrNicoe36cabrio
@MrNicoe36cabrio 5 жыл бұрын
You did a great job! Quite curious what the car giant.
@kermittfrog480
@kermittfrog480 3 жыл бұрын
I watch this last year and still bought a 535 shortly after 🤷🏻‍♂️😉
@mikimiki195
@mikimiki195 3 жыл бұрын
Great video
@Kipitrl
@Kipitrl 5 жыл бұрын
Great video thanks!
@64BitRevenge
@64BitRevenge 5 жыл бұрын
Subbed, nice content!
@nathanasad2908
@nathanasad2908 4 жыл бұрын
This is incredibly helpful! Do you need any supporting mods other than a custom tune? Where do you plan on getting a tune? Thank you!
@davispaul82
@davispaul82 2 жыл бұрын
I love watching your videos. The question I have for you is that I plan on doing, I clutch, turbos, and water pump. Would it just be easier to pull the engine out of the front of the car? Also how long did this take you?
@SteveWeltman
@SteveWeltman 5 жыл бұрын
Wow, yet another amazing video! Exactly what I was thinking of doing, once I got the courage to change them out myself. My 09 E90N54 is at about 120k so lots of (expensive) things need to be changed at once. Wish you mentioned putting the cross brace on first before dropping your subframe, but I knew to do this from your other videos. You covered so many procedures in this one video, many many thanks! Money being the same, would you have used the Vargas GC lite instead? Thoughts on them? Thanks again! Steve
@VehicularDIY
@VehicularDIY 5 жыл бұрын
Thanks! I was looking at them, I stumbled upon the DAW turbos and they sounded promising so I figured the info would be helpful to the community. So money being the same I still would have gone with them but more for interesting content.
@nickolascain2994
@nickolascain2994 5 жыл бұрын
Thanks for the informative videos as always. Very excited to see the results! Sticking with current fueling setup? I'm probably going to unless I get a spare 6AT. But I'm definitely looking at an upgraded trans cooler on my E60. Keep up the good work brotha!
@r.bianco
@r.bianco 3 жыл бұрын
192k miles ?!?! Super clean👍
@KyleLovesBass
@KyleLovesBass 4 жыл бұрын
I have these same turbos and so does my friend, they are great. Quick spool up, nice sound, good power. Still hard to make over 500hp on our crappy pump gas here in Canada but in the US these will make a lot more power
@curtisg5117
@curtisg5117 4 жыл бұрын
what are you running bov? my tial chasing surge with these
@KyleLovesBass
@KyleLovesBass 4 жыл бұрын
@@curtisg5117 you need a softer spring in the BOV
@Dbrizle1
@Dbrizle1 11 ай бұрын
What turbos are these? Stage 2 or stage 2+
@vincenguyen5129
@vincenguyen5129 5 жыл бұрын
22psi with these on my 135i...freaken rocket...couldn't be happier!
@WalrusPowder
@WalrusPowder 5 жыл бұрын
How long have you had the turbos? No issues with them?
@VehicularDIY
@VehicularDIY 5 жыл бұрын
Ya my V1 tune is targeting 24 PSI, the first time I floored it was so much more than I expected. It feels like the difference of going from a stock tune to a stage 2 FBO tune.
@vincenguyen5129
@vincenguyen5129 5 жыл бұрын
@@VehicularDIY chuu chuu Shanghai boy! lol this thing spools quick huh?
@vincenguyen5129
@vincenguyen5129 5 жыл бұрын
@@WalrusPowder no issues so far... I know guys that had them a yr or more.
@bluebook944
@bluebook944 5 жыл бұрын
Interesting to see you did exactly the same thing I did, which was to put the downpipes back in before bolting up the right hand engine mount bracket :)
@VehicularDIY
@VehicularDIY 5 жыл бұрын
Lol yeah but it slips right in behind so no time lost luckily.
@jasonspitzley1004
@jasonspitzley1004 5 жыл бұрын
I seen that too! Lol I was like wait a second. by the way my son just bought the same turbos we have them mounted the motor and transmission are out of the car and are going back in this week as well.
@pancake191
@pancake191 4 жыл бұрын
Your videos are so clutch. When are we going to see an update on these?
@muumuumu
@muumuumu 5 жыл бұрын
nice hope for some test results soon
@VehicularDIY
@VehicularDIY 5 жыл бұрын
Yeah very soon, you guys won't be disappointed. If you like the idea of hanging with stock Hellcats :)
@JD2.0N54
@JD2.0N54 4 жыл бұрын
This video have me scratching my head.
@misterp4047
@misterp4047 4 жыл бұрын
Great video, very helpfull Thanks. How about the next video 😁your driving experience and power on the dyno with these stage 2 turbo from DYNAMICS AUTOWERKS. I have contact them because i am olso interrested in these turbo's 👍Waiting for your next upload 👊🏼
@Mr.duke10783
@Mr.duke10783 3 жыл бұрын
This is some great gear head
@ricksacco2612
@ricksacco2612 4 жыл бұрын
Your videos are great but I have one question. How much does the removal and install differ when it's a 2010 335ix? With the front drive shafts being involved I'm assuming its a little more work.
@BIMMERZEITT
@BIMMERZEITT 5 жыл бұрын
Great video! I hope I never have to do this job. Not even for a monetized video, lol
@robertmarley8852
@robertmarley8852 2 жыл бұрын
You are a true mechanic. You can call out the last guys mistakes. You said they used silicone instead of a gasket and that was lame.
@angelavila3261
@angelavila3261 3 жыл бұрын
Lmao i feel the missing screw part. I just did some work on my n54 and found so many missing lol i was able to find them all at ace with the help of a bmw tech forum on reddit.
@sirfartsalot1328
@sirfartsalot1328 4 жыл бұрын
Good lord! That seems like an enormous pain in the ass. The drive must be worth it.
@soside619
@soside619 3 жыл бұрын
Good stuff bro. You could have done your oil pan gasket too.
@gc745li
@gc745li 2 жыл бұрын
Great video. What turbos did you install?
@alangonzalez3186
@alangonzalez3186 3 жыл бұрын
Hi brother first of all thanks for all the content that you have made I was wondering if you can help me with question that I have I have an mmp stage 3 installed and I was reading about need bigger turbo drain lines because of the boost increase can you give some advice on that also I have a leak on the the turbo lines so I'm going to drop the turbos to change the seals and the copper washers would you suggest to get new wider or thicker lines for the turbos thanks for your time and advice cheers from South Texas
@PlzCalmDown
@PlzCalmDown 4 жыл бұрын
When you remove that heat shield (all steps up to the 2 minute mark), is there enough access to adjust the front (closer to front bumper side) turbo wastegate actuator?
@uncrustablesss
@uncrustablesss 2 жыл бұрын
What did you do exactly to prime the turbos? Like step by step , I’m done replacing my turbos now it’s time to start it , thanks in advance
@BlackyBrownDestruction9337
@BlackyBrownDestruction9337 4 жыл бұрын
I replaced the aluminum torx bolts with normal bolts because it’s cheaper, less likely to be stripped and alot safer due to it’s strength on my friends 08 335i convertible
Чистая Правда о BMW N54! Немецкий 2JZ
28:17
Turbofun Crew
Рет қаралды 105 М.
Smart Sigma Kid #funny #sigma #comedy
00:19
CRAZY GREAPA
Рет қаралды 13 МЛН
Homemade Professional Spy Trick To Unlock A Phone 🔍
00:55
Crafty Champions
Рет қаралды 48 МЛН
🌊Насколько Глубокий Океан ? #shorts
00:42
BMW 335i (N54) - Turbo Removal and Install DIY
30:37
ECS Tuning
Рет қаралды 904 М.
My BMW 335i Got Slower After Upgrading The Turbos! (N54) - EP 22
16:34
How to Make 600+ HP from your N54 E9x! | Upgrade or Unload
31:04
The Power Results Are IN!  They Made SERIOUS Power! | BMW N54
6:15
Vehicular DIY
Рет қаралды 44 М.
My $5000 BMW Will Have Over 600 HP With These! | N54 Turbo Upgrade
10:56
Here's Why Your BMW Runs Like S***, And How You Can Fix it For Only $3
16:26
This Is The Key to Reliable Power in an N54...
18:29
Thic Whips
Рет қаралды 25 М.
3 wheeler new bike fitting
0:19
Ruhul Shorts
Рет қаралды 43 МЛН
МАСТЕР ПАРКОВКИ
0:22
В ТРЕНДЕ
Рет қаралды 3,8 МЛН
It's double shovel summer baby 🎥: @duke_211  #construction #asphaltpavement #pavingasphalt
0:14
PavePro Asphalt Solvent and Release Agent
Рет қаралды 18 МЛН