Changing A Halogen Lamp - Medway based Domestic Electrician, kentelectrics.com Call today for a free quote 01634 316279
Пікірлер: 50
@triton45412 жыл бұрын
Bonjour James, J'ai liké le tuto depuis la France... mais également votre mise en garde de ne pas toucher avec les doigts nus : Puisque part méconnaissance j'avais claqué une ampoule halogène sur la Renault 11 TXE (de mes parents). L'ampoule était claquée comme une ampoule de flash d'appareil photo à pellicules. C'est-à-dire qu'elle est devenu blanche opaque !! La deuxième fois : j'ai pris un tissu propre pour la manipuler et c'était parfait. Je précise que mon anecdote date des années 90 car les Renault 11 TXE n'existent plus et les flashs à ampoule jetable non plus (ampoule carrée de 4 flashs, avec 1 flash par côté). Merci de m'avoir lu :) car nous sommes le jeudi 24/03/2022. ----------------- Hello James, I liked the tutorial from France... but also your warning not to touch with bare fingers: Since I didn't know how to go, I had slammed a halogen bulb on the Renault 11 TXE (from my parents). The bulb was slammed like a film camera flash bulb. That is, it has become opaque white!! The second time: I took a clean fabric to handle it and it was perfect. I specify that my anecdote dates from the 90s because the Renault 11 TXE no longer exist and the flashes with disposable bulb either (square bulb of 4 flashes, with 1 flash per side). Thank you for reading :) because it is Thursday 24/03/2022.
@JohnSmith-4U2 жыл бұрын
Its now 2022 and I'm watching this great video.......Thank you.
@michaelmika29959 ай бұрын
Very well presented. Thank you.
@ddom16214 жыл бұрын
This is so incredibly nice of you to do. Top man. God bless you. I am going to attempt repairing mine in the same way tomorrow!
@aadya-kumar9 жыл бұрын
This video very helpful. Holding in the bulb using the packing material is the key.
@hankapaldum60278 жыл бұрын
thank you for the explanation and instruction, it saved me some money and time.
@makaras5 жыл бұрын
Thanks so much - after AGES our first security light bulb EVER has gone - will watch again when the replacement arrives :-)
@fenathan368 жыл бұрын
Thank you for the video. I won't be touching the bulk with my bare fingers again. Learned my lesson. Thanks too for the tip about ensuring the "knuckle" faces to the rear.
@mikeince29296 ай бұрын
Thanls James!!
@keyboardwarrior94064 жыл бұрын
Thank you for the knuckle tip!!!
@user-bp4kj9cp9o2 жыл бұрын
It works great and is easy to operate
@karalee75695 жыл бұрын
Thank you for this video. I am able to save quite a few dollars by doing work around my home myself. Grateful!
@willbuckley542 жыл бұрын
The snag - as I thought it might be - is that the screw has been in for 10 years or better and now it's rusted in. How do I unscrew it? I've tried WD40 but to no avail.
@user-zb1uz4fz4d8 ай бұрын
Thank you so much. I will tell my to change for me.
@metratone52 жыл бұрын
Excellent video. Thank you.
@mikedelaney9 жыл бұрын
Thanks for the video mate. I found it helpful and informative. Cheers!
@foucault99784 жыл бұрын
You're a legend. Thank you
@kathrynen60964 жыл бұрын
Thanks for sharing thus. I really need to change mine xx
@WakeUpLookAndSee5 жыл бұрын
Very helpful. Easy after watching this video.
@michaelpmccullough4 жыл бұрын
Excellent - thank you!
@adampash11 жыл бұрын
very helpful, thank you very much! From South Africa :)
@keirbirch46326 жыл бұрын
Perfect video all substance no waffle
@EscapeArtist6624 жыл бұрын
Thank you for helping this blonde change a lightbulb!
@DallyDragon6 жыл бұрын
Very helpful video. I tried changing my bulb but found the glass is stuck to the rubber and I was not sure if it was meant to be. I will have to get that off with a sharp knife or a chainsaw I guess.
@mohammedadil81345 жыл бұрын
Excellent video
@bryazz2 жыл бұрын
Very helpful. Thankyou. 🙏
@morriganravenchild66136 жыл бұрын
Very helpful. Thank you.
@kclark84367 жыл бұрын
Friend i am in the process of replacing my lamps and the screw for the frame fell and i cannot find it. Do you know what size screw that is?
@KentElectrics7 жыл бұрын
K Clark , It will vary from fitting to fitting, if your in the uk pick up a small multi pack from B&Q wit a selection of threads
@phumlanxumalo66106 жыл бұрын
Thank you
@mehzabeengill13476 жыл бұрын
Can you do a video with how to change and replace the light with a new one?
@idontbusiness8 жыл бұрын
He's a star
@salmon360 Жыл бұрын
Hello, what is the reference of such halogen bulb? What led bulb reference could be used to replace it?
@lindseymoreland98296 жыл бұрын
Great video thanks!
@Millwall1239106 жыл бұрын
Great video
@MB-uv4qu4 жыл бұрын
Thank u for sharing x
@terrytrantery48775 жыл бұрын
Thanks for the vid - i have a very similar light and my issue is that the unit clicks when it detects motion but the new bulb i have put in still doesnt activate. Do these bulbs have polarity so i may need to switch sides? I'm presuming electricity is still being fed to the unit giving it's trying to work. Both metal connectors are touching correctly. Any suggestions? Thanks in advance!
@MoCheri339 жыл бұрын
I tried replacing my bulb before watching this video and touched the bulb, the light didn't work. Could it be because I touched it?
@aarondynamics13114 жыл бұрын
No. Touching a halogen bulb will not stop it from turning on, it will only reduce the life of it, although, if you did touch it, either replace it or clean it with alcohol as the glass envelope may rupture if the lamp is left on for a while.
@crittercrazy38058 жыл бұрын
Hi James thanks for the demo....I Have a question for ya. I have an old halogen lamp with a ceramic double end socket, and the one end has fried out because as we all know bugs think it is a bug light. I am in the dark here, I need to replace it, but it looks like they are using these new round single like fixtures on each side I guess instead of the ceramic doubles now is that right? Are these any better then the old ones that crack & fry out or is it just a cheaper made version in different form? Thanks kindly for any help you can spare....Critter Crazy
@christopherweaver95437 жыл бұрын
All I wanted to know is how to take the bulb out, know I know, also exited with the knowledge of not to touch the bulb at all. Well besides the white parts.
@minouratoshi9 жыл бұрын
I have a halogen work-light which does not work. It looks exactly like the one you worked on. The label states that the bulb must be type T. What does type T mean? The current bulb is 110-130V 500W, and it has label DS6EDGE DO8S,which I do not understand.
@Marketingforsparksuk9 жыл бұрын
Hi Toshimi - Type T and type S lamps simply mean they are incandescent lamps - It would appear that the fitting you have is for a 110Volt Supply are you in the UK?
@-Ace-of-Spades- Жыл бұрын
Good straight forward instructional video, but . . . . . while summing up with four points, there was actually five, with two points both sneakily referred to as ‘number 3’. That was only meant to be a humorous observation but reading over this comment now seems like it’s by somebody who needs to get out a bit more. 😕
@trinityadam6 жыл бұрын
Hello... Did you film this video at your own house ?
@KentElectrics6 жыл бұрын
Hi Adam, No its at some flats I was working at
@trinityadam6 жыл бұрын
Hi... Did you Make this Video at your own House ?
@Aldo-zp8wk4 жыл бұрын
Why can't you just use gloves
@wireconnect73874 жыл бұрын
Checkout a brighter light with installation included. kzfaq.info/get/bejne/mpNilsiS3c-Rcas.html
@cliu20547 жыл бұрын
Learn lessens, don't touch bulb by bare hands, knuckle on the back.