Changing an SDS Chuck Mechanism

Changing an SDS Chuck Mechanism | Toolstop Guide

Рет қаралды 502,368

Күн бұрын

Changing an SDS Chuck Mechanism | Toolstop Guide
Another power tool maintenance video from Toolstop. Toolstops own Alex Bruce strips down an SDS mechanism chuck mechanism demonstrates how to replace the ball bearing and assembled parts. We hope this video has been informative and beneficial for you! Subscribe and click the Bell Notification Icon for more Toolstop videos
00:00 Intro
00:29 Explaining the SDS Mechanism
00:53 Common Faults
01:31 Tools Required
01:51 Removing the Old Mechanism
03:10 Fitting the New Mechanism
05:23 Job Done!
Toolstop is one of the UK's leading suppliers of professional Power Tools, Hand Tools and Accessories. Subscribe for more Demos, Reviews and Promotional Material. Click the bell notification icon to be notified of all new Toolstop videos.
Subscribe to our channel - / toolstop
Like us on Facebook - / toolstop
Follow us on TikTok - / toolstop
Follow us on Instagram - / toolstopltd

Пікірлер: 99

@toolstop 3 жыл бұрын

Shop Power Tools, Hand Tools and Accessories at Toolstop. Follow the link for Toolstops special offers: bit.ly/33B5dpf 🔨🔨

@52lorenzo Ай бұрын

Great. SDS is so a simple construccion. That's why it has to be patented. A big hug to the person who invented this!! And so many years we worked without SDS! Great

@ElmoSyr 2 жыл бұрын

Thanks! You managed to show more in the first 10 seconds than most youtubers do in 10 minutes!

@stankostanivukov8659 8 ай бұрын

Great video.Thanks of Serbia.

@esasrl3384 2 жыл бұрын

Excellent tutorial, very well explained! Many thanks from Italy 🇮🇹

@mrcamacho1 3 жыл бұрын

Great Video! Thanks for making this repair clear and easy to understand.

@ukghconst 6 жыл бұрын

Brill thank you so much, I bought a drill with bit stuck in, managed to disassemble it, someone had been there before put it back together wrongly, they had the cup facing. I never though of the ball going inside the cup, no wonder the ball jumped out. great it now works, I will be contacting you for some spare parts.

@treeblopez 3 жыл бұрын

Thanks very much for this video. I managed to follow it and repair my SDS chuck.

@nigelcasey2874 4 жыл бұрын

Great video, clear and easy to follow. Well done guys.

@carlgore1565 2 жыл бұрын

marvellous video , made easy work of my broken chisel , thank you 👍

@anchan8708 4 жыл бұрын

Rating : AAA A1: good explanation A2: good quality of voice recording A3: good quality of video

@Toolsinaction 14 жыл бұрын

Great Video. Very informative and easy to follow. Keep up the great work

@thesoultransformer966 6 жыл бұрын

Well done video. Clear instruction. Very usefull. Thx a lot.

@tonyholt90 7 жыл бұрын

thanks your video was very informative! gonna sort out my SDS ;)

@mikefanick6522 5 жыл бұрын

Excellent video. Thanks for sharing.

@PixelPalaver 5 жыл бұрын

Thank you, now I can do it myself :)

@dhiren441 10 жыл бұрын

excellent demo

@AerialLensVideo 3 жыл бұрын

THANK YOU! You helped me save a BAUER 1-1/8 In. SDS Variable Speed Pro Rotary Hammer.

@toolstop 3 жыл бұрын

Glad it helped! Check out our channel for more guides, reviews and demos 😁

@ASAS-ns3cy 3 жыл бұрын

Trank you very mich dir the excellent explantation!

@TheNewfoundmusic 13 жыл бұрын

@MrToolstop Thank you very much for the quick reply, i have been going insane trying to find out what size they are. thank you again.

@BarendK 2 жыл бұрын

Thanks! Save me buying a new drill!

@dannyf4995 4 жыл бұрын

Thank you for your guidance.

@randomengineering2142 Жыл бұрын

Thank you, exactly what I needed to know.

@stevenicholls1144 10 ай бұрын

Very helpfull , Thank you

@bernardrevill9547 3 жыл бұрын

Good informative video, straight to the point with none of the useless chatter some others have

@PiotrKe 5 жыл бұрын

Thank you very much! :D

@LFOVCF 3 жыл бұрын

Cheers pal. much appreciated

@livingelectrical111 3 жыл бұрын

Good job

@hamada111990 7 жыл бұрын

thnx, it was very useful

@czaczacza9936 11 ай бұрын

Great! Thank you!

@toolstop 10 ай бұрын

You bet!

@clairedan6340 4 жыл бұрын

Thank you so much. All I wanted was a demonstration of how to fit a drill bit into my newly purchased SDS drill. This did the job beautifully and gave me some good context of how the SDS chuck works. Once again thanks.

@lebomooke 7 жыл бұрын

thanks that was very good

@dondelatorre17 5 жыл бұрын

Excelente Video

@KniightYz 12 жыл бұрын

Great Video

@djamsmas6699 8 жыл бұрын

Merci bonne demonstration .

@anjabo8448 8 жыл бұрын

Thanks. Will save now 80Euro.

@wasfiiwasfi 11 жыл бұрын

thank you man !!

@pradeepgaikwad6249 3 жыл бұрын

Thank you

@arifstar09 12 жыл бұрын

Thanks 4 share

@MEGAONE302 12 жыл бұрын

Good job sir.

@MalcolmJames-sg3zg Жыл бұрын

Well explained thanks

@jantonio991 6 жыл бұрын

thanks very good

@jacekdulinski913 5 жыл бұрын

Thanks

@jantonio991 5 жыл бұрын

exellent ,

@LewdDawg 4 жыл бұрын

Thankyou

@adl2005 3 жыл бұрын

YES YES YES THANK YOU SIR.

@1982garyo 5 жыл бұрын

Hi mate great vid mines missin the ball bearing it spat it out will this despair work on any make of SDS not just bosh

@nasuper100 7 жыл бұрын

thanks

@fellynetpay3195 3 жыл бұрын

Nice info

@igorgrgurinovic3920 5 жыл бұрын

Thanks youre video. Youre video me hellp.

@edinfific2576 3 жыл бұрын

Nice explanation and an interesting accent.

@patagualian 12 жыл бұрын

Yes, excellent video. Well done. (I hope non-UK residents followed the lovely accented tones of Alex!) I guess Makita & Bosch are of a muchness in this system of retention. A question though: Why does the ball bearing come adrift in the first place? I mean, where does it go? Am I right in thinking the hole becomes larger with time & wear....the ball bearing simply drops out through the main orifice (for the tool)? And that the " Kit" merely contains a larger diameter ball-bearing? Thanks!

@jadonx 9 жыл бұрын

my Bosch corded SDS drill is throwing black oil out of the drill release sleave. Is there a seal to change and if so is it a big job? Is there special lube to refill with?

@jgrenwod 3 жыл бұрын

Exactly the problem with my drill. Id wondered where that ball came from. The drill is fixed.👍

@g7wap 9 жыл бұрын

would that kit work on my powercraft? When i got it all that was in there was a spring. no bearing. I installed a bearing 7mm and it holds a bit and it works but i can;t help thinking it needs the rest of it although the bearing hasnt dropped out yet

@dwinovianto1250 5 жыл бұрын

I have HSS chuck but my hole saw extension bar is SDS. How to convert HSS chuck to SDS bar? Thank you.

@SophiesWorld2024 3 жыл бұрын

Can I use regular drill bits in this type of drill? Is there some attachment I could get?

@kilnprabu 5 жыл бұрын

Sir,nice video,thanks,is it possible to remove the whole chuck and replace it with keyless chuck,is it possible??

@johnhardynet100 6 жыл бұрын

Excellent video, thank you. I have a Makita HR2540 not used much. I find that the drill or chisel is very loose in the chuck and has at least 9mm up and down play. This makes accurate chiselling almost impossible. I doubt this can be correct and don't know how to fix this. Any ideas please? Thanks John

@johnhardynet100 6 жыл бұрын

I had another look at this excellent video. My assembly is slightly differnt and there is an excellent diagram on page www.mtmc.co.uk/Makita-HR2450-Spare-Parts__p-75863.aspx I also notice on the video at point 5:26/5:50 that the drill has the up and down play that seems to rule out accurate chiselling.

@ukghconst 6 жыл бұрын

how much is a repair kit for PBH 2000 RE, like shown in your video. where to buy, I live in Ghana.

@igordobr 4 жыл бұрын

Hi . Thank you for great video Have exactly same problem, with same drill could you please advise there to buy or how that replacement set is called ,showed in video.

@toolstop 4 жыл бұрын

Try this link Igor. hope it helps you. www.boschtools.com/us/en/service/replacement-parts/

@TheNewfoundmusic 13 жыл бұрын

Are all the ball bearings the same size for every sds chuck?

@shivatechintelugu8253 2 жыл бұрын

11 years 🙏🙏

@batinhbngo 11 жыл бұрын

hi. do you know how to remove the chuck from a Hilti TE75?

@manzor1959 7 жыл бұрын

...... thank you. .......well said," teach me to fish and I will eat for the life time". knowledge is power and power is money.

@StevenGamesWHC 8 ай бұрын

So the ball bearing locks the bit in place so it doesn't fall out what is the shaft with the fins that hold the bit when it spins because my bit will slip in the drill.

@sham1234567891 4 жыл бұрын

Greetings and thanks for the great post. Is it possible to replace a jaw chuck with a sds chuck on a drill machine? Thanks.

@toolstop 4 жыл бұрын

Some drills have interchangeable chucks. I don't know which drill you are referring to. Here are a few examples we sell at Toolstop Shamrai. www.toolstop.co.uk/makita-hr2630t-3-mode-sds-rotary-combination-hammer-drill-with-keyless-quick-chuck-110v-p73196 www.toolstop.co.uk/dewalt-d25134k-sds-hammer-2kg-3-mode-with-quick-change-chuck-26mm-240v-p71814

@sandydogy 6 жыл бұрын

Hi do I have to grease this regular and what type of grease is used? thanks

@crpth1 6 жыл бұрын

sandydogy - In my opinion yes. It should be cleaned and lubed regularly, to maintain it in good working order. BUT, there´s always a but...LOL :-) If it´s used for dusty materials, such as concrete, etc. that dust tends to stick to grease way to easily. My approach is after cleaning/blowing the mechanism, give a thin film of silicone. Silicone grease last longer, but silicone spray is simply easier, individual choice. ;-) While at it, it´s always good to blow some compressed air trough the vents...Wear a mask. ;-) Cheers

@ashleysmith8533 10 ай бұрын

I have a dewalt breaker and I drilled a 100mm hole through a brick wall using a sds and for the life of me I can't remove the sds bit, I've managed to get the top cap off, pulled clip out lifted out the ball and it's still stuck doesn't matter how many times I pull or try hammer it away nothing, it still fits and works as it should but I can't swap it for use for anything else

@abdelbassetmosbah4826 4 жыл бұрын

Can you do this for product STAYER

@damjanstojancic7755 9 жыл бұрын

Hi, I have another problem, I have the drill bit extension stuck into the sds chuck mechanism, can you please help me with this issue?

@manzor1959 7 жыл бұрын

..... I can help you of course. ..please feel free to share the problem.

@soonkarmi3376 7 жыл бұрын

I have also that same problem.

@pontuslandin6883 4 жыл бұрын

My Bosch SDS drill does not run centric anymore. All drills wiggles back and forth. Could this be the chuck or is it the shaft that’s bent?

@toolstop 4 жыл бұрын

Difficult to say Pontus. Unfortunately we don't carry out a repair service. Here are a few machines from our website which may interest you. www.toolstop.co.uk/search/?q=Bosch+sds+drill

@manoliskish 4 жыл бұрын

Good video I need some help,i have a 11236 model but i lost the chuck,do you know a website to buy it online?

@toolstop 4 жыл бұрын

I had a quick look online and couldn't see anything manoliskish.

@manoliskish 4 жыл бұрын

Toolstop thanks

@dharmendratatasky4121 2 жыл бұрын

👌👍😎

@markadams2139 4 жыл бұрын

Thank you sir where do you get the chuck to purchase

@toolstop 4 жыл бұрын

I dont know which chuck you are looking for exactly but here is a rough seach on the internet Mark. www.google.com/search?q=bosch+sds+chuck&rlz=1C1GCEU_en-GBGB826GB826&oq=Bosch+sds%2B+chuck&aqs=chrome.1.69i57j0l7.10919j0j7&sourceid=chrome&ie=UTF-8

@sharky6920 4 жыл бұрын

er bestaan ook circliptangen die je moet samendrukken ipv opentrekken. that's much easyer !

@Hackfresse90 7 жыл бұрын

how big is the ball?

@jake4101 7 жыл бұрын

7mm www.powertools-aftersalesservice.com/public/boschprof/service/bxp/VSS

@jorisdobbelaer1316 9 жыл бұрын

Thanks for the video. Bought a second hand drill where the SDS mechanism was broken. This video made it really easy to fix this. Now it would have been cool if Bosch would just sell separate metal balls instead of complete repair sets. Such a waste of money and material, but that's capitalism I guess...

@mostafaakram3159 6 жыл бұрын

did he say nasty ass ?

@toolstop 6 жыл бұрын

Doubtful

@mweimorts Жыл бұрын

I, too, kept thinking he was saying "a nasty ass drill" instead of "an SDS drill." Great video, though. Everything I needed to know to change tool holder on my Bosch rotary hammer.