CHANGING CONTROL ARMS + BUSHINGS ON MY AUDI A3 *THIS DIDNT GO TO PLAN*

No video

CHANGING CONTROL ARMS + BUSHINGS ON MY AUDI A3 THIS DIDNT GO TO PLAN

Рет қаралды 23,146

Күн бұрын

So before the car goes of for its tracking, there are a few more bits that needed addressing. Like always I set out with all the best intentions but things quickly started going wrong..... tune in to find out more.
Make sure to subscribe to the channel to help support me below, and remember to check out my instagram for all the behind the scenes on upcoming videos!
HELP ME GET TO 10K! : kzfaq.info...
Follow my Instagram for updates: mati_mcfetridge
Check out the newest car to the channel here -- • VW UP GTI 115PS - WALK...
Watch my A3 buyers guide here -- • AUDI A3 8P - COMMON PR...

Пікірлер: 42

@rosecityhustle4938 Жыл бұрын

Dude you really shouldn't jack up your car on grass. I was terrified for you while watching this video.

@Michael-pd4wu 2 жыл бұрын

Everytime I start a job I’m amazed if there’s not a bolt seized, something stuck, damaged or the wrong size. Good feeling when you’ve done the job though, part of the fun I suppose. 😅

@matimcfetridge 2 жыл бұрын

I feel a bit like that with every job I do, always something wrong haha

@Richard_L_Y 2 ай бұрын

If you can even get someone to adjust front Camber (compromising with Caster, which isn't as important) you're doing well! (I like the music btw).

@Richard_L_Y 2 ай бұрын

This is all excellent stuff: however just order new bushes; consider using 'MEYLE HD' (the HD is important, rather than e.g. Polyurethane, which are too rigid..)? Also order (stretch) bolts via a Febi supplier, def not Audi!

@ericmp20091 7 ай бұрын

Good deal you showed the problem with the gearbox being in the way. Thank you much brother! 🙏

@JaseCJay 8 ай бұрын

Just did my 09 8P rear main oil seal on jack stands! What a bear of a job! Looks good as a coupe!

@tubejorrit 9 ай бұрын

Did the same job on my golf gti, used S3 rear bushing and Passat control arms (they are aluminium) as a little upgrade.

@mattwho1980 2 жыл бұрын

Lowered mine on racelands. Still needs tracking. Rear bushing gone so I've got both sides like you have just not fitted yet. Off in for k04,injectors,intercooler,clutch. So do it all at same time. Off in on the 9th

@oliver1259 19 күн бұрын

Hi mate can you link where you bought the suspension arms from cheers

@FailedEmmisions Жыл бұрын

You saved me on that left side front control arm. Thank you Edit: if you don't have that type of ball joint tool a 19mm open ended wrench with a pipe works great

@Framus-wm3ye 4 ай бұрын

Did you change your rear subframe as it looks rusted to hell? they all seem to corrode hear badly on the A3's

@vanishingpoint808 9 ай бұрын

Please please please use axle stands when working under your car. A neighbour was crushed by a camper van in similar circumstances. I've done it in the pas but it's not worth the risk.

@arronlowley5659 2 жыл бұрын

did you get any banging when hitting bumps with the broken control arm bushings? mine are f**ked and the cars been banging over bumps and wandering a little.

@RaNdDom345 Жыл бұрын

I have audi a3 2019 2.0tfsi quattro driven like 80k and the front end start to make a squeeling sound whenever I turn right or left at 10-40km speed or thru speedbumps etc.. is this normal? I think its the control arm rubber? I greesed them well and the sound left like for a day and it came back the next day..

@RaNdDom345 Жыл бұрын

The control arm is in well condition too ane the rubber as well but it still make the rubber squeeling sound..

@yasserh.b7616 2 жыл бұрын

I like the way how much you lovd your car keep it going

@matimcfetridge 2 жыл бұрын

Got to be done mate! Thanks for watching 👍🏼

@LIESIE24 9 ай бұрын

Do u need to get a 4 wheel alignment after doin this cheers

@scarletturk3892 7 ай бұрын

Working under a car supported by a hydraulic trolley jack...with an axle stand to hand. 🙄

@POWERHAUL70006 Жыл бұрын

hi matt i’m not sure if you’re still reading comments on these later videos but how is the ride quality on these springs?

@paulgriffin647 6 ай бұрын

Mate please please don’t ever Jack your car or put axle stands under on grass. It will kill you in the most horrific way. I’ve known 3 people who’ve died under vehicles by jacks or chocks or ground moving. Always use on flat hard surface. Preferably concrete. 👍🏻

@piovo5222 2 жыл бұрын

Maybe bent wheels for the wheel wobble at speed?

@matimcfetridge 2 жыл бұрын

after tracking and replacing these parts its gone away! thankfully... was worried as the wheel was my next guess

@AA-dm1gl 2 жыл бұрын

Can you do a video on how to change the headlight bulb?

@Michael-pd4wu 2 жыл бұрын

Ones easy enough just twist the carrier the other one there’s f all room. There’s vids on here one where a fella has a mirror to show the carrier and how it sits.

@AA-dm1gl 2 жыл бұрын

@@Michael-pd4wu There is more to it, I think the front bumper has to come off or remove front wheel arches and access this way?

@Michael-pd4wu 2 жыл бұрын

@@AA-dm1gl you can do it without by removing the wheel arch liner and a bit fiddling. Trust me it’s a lot less screws.

@nodwaa9227 11 ай бұрын

what id give for some land like this. i have to do mine on the main road :(

@VeetBallz 2 жыл бұрын

I was hoping to see the rear wishbones removed but that bolt does seem an issue. I need to do mine asap as the bush has failed bad and the wishbone twisted and in turn lowering the car on that side. Are you recommending getting a garage to do it? I have the parts already and was going to fit them myself but unsure now.

@matimcfetridge 2 жыл бұрын

I tried mate but it just was not budging, ended up using a recip saw to get them off and it was still a bit of a hassle!

@VeetBallz 2 жыл бұрын

@@matimcfetridge Cheers for the reply mate. I'm going to let me local garage tackle this one for me.