Changing pinball playfield inserts and installing decals

Рет қаралды 5,863

Leebo's Pinball

3 жыл бұрын

Пікірлер: 12

@sgl8810 Жыл бұрын

Just got my first machine. Bally 1981 Flash Gordon. This video is extremely helpful, thank you.

@zenithtuberadio 3 жыл бұрын

Curious on the Gorilla Glue.... isn't it known to expand some after adding water? Thought that would cause plastic to rise. I could be wrong.

@LeebosPinball 3 жыл бұрын

Glad you asked that. I didn’t have problems except for one insert that didn’t seat well. It might have been due to the glue. After several days, I decided to redo that insert. I was able to heat and remove the insert without damage, shaved down the bottom side of the insert a little, and reinstalled (again with the gorilla glue). No problems that time. It might be that I used very little glue, maybe low enough not to be a problem. That said, maybe some other glue would be better.

@timault8209 Жыл бұрын

I recommend friction-fitting inserts into a playfield. Tight fitment along with residual adhesive are sufficient to keep an insert secure. PVA glue only when absolutely necessary.

@LeebosPinball Жыл бұрын

Good tip! Thanks

@thomasmickle7289 3 жыл бұрын

Is that a sample game? I see you have red boards under the playfield.

@LeebosPinball 3 жыл бұрын

Hmm... never noticed that before. As far as I know, it’s just a run-of-the-mill production Mousin’ Around.

@thomasmickle7289 3 жыл бұрын

@@LeebosPinball I think those are on prototypes and sample machines. Maybe a really early run. Maybe look at the serial number.

@LeebosPinball 3 жыл бұрын

@@thomasmickle7289 Interesting. Maybe it is a sample/early production run. This game belongs to my cousin; next time I visit him, I'll have to check for a serial number.

@habakuktibatom57 3 жыл бұрын

I own a MOUSIN AROUND as well and have some red lamp holder boards under the playfield. I think it´s normal.

@LeebosPinball 3 жыл бұрын

I finally got to check the serial number. It’s 300944; which I assume is just somewhere mid-production.