Changing Spark Plugs And Coils On My Porsche Boxster! What Does a Misfire Sound Like?

Рет қаралды 10,075

2 жыл бұрын

Having managed not to annihilate the car nor having not died in a billowing fire ball of a crash doing my own brakes in the last video, I am now extremely cocky. Unbearably so. So I’m raising my game to the giddy heights of doing a complete tune-up! Hell yeah! I’ll show you how to get your car running so much more smoothly! I’ll even show you what a misfire sounds like so, if you car is making that noise, you’ll know one way of fixing it!
Again, I have bought all the parts: spark plugs, spark plug tubes and coil packs. Watch me bodge yet another perfectly easy job, reduce good new parts to their constituent metals, throw good money after bad and then decide to get someone to it for me just after I have hit the bloody thing with a hammer. No doubt I’ll sell the car immediately afterwards in a fit of pique too. Bloody thing. Or did I do it very easily? Watch and find out! (Although I know where my money is).
You can download all my Porsche model guides at www.jayreadyoutube.com so go and take a look there, OK?
Why not follow me on Instagram too? I am a CAR guy first and I get around so take a look at the reels and pictures that I take because you might like them! Also you get news on my own Porsche, my MG and other life events there before KZfaq! Look for jayreadyoutube on Insta now!
Here is the kit that I used that FCP Euro supplied: www.fcpeuro.com/products/pors...
#porsche #boxster #tuneup

Пікірлер: 71

@mrh6577 2 жыл бұрын

Great job 👏 I’ve changed the ones on my 997 which was a pain due to the exhaust, it looks like there’s slightly more room on the Boxster? A better design to be honest. The torque on the coil pack bolts is 7.5ft lbs. I didn’t have a torque wrench small enough so I just done the same, nice and tight, although keep in mind the low 7.5 setting. It looks like you had the newer type coil packs which means you had longer bolts supplied. The old coil packs were prone to cracking so they made the body of the coil pack thicker on the new one hence longer bolts. Good job with the tube and butt plug 😅. I’ve not replaced these tubes before? If you remove and replace the spark plug with the tube out is there a risk if the plug dropping down where the tube should be?? Ie should you have fitted the tube back and then fitted the plug?? I’m not sure as I’ve never done it but I probably would have put the new tube in first? I couldn’t see any axel stands on camera? Did you use them? If not then I would next time, you here lots of stories about jack’s failing. Good job

@JAYREAD 2 жыл бұрын

I’ve pinned this comment so hopefully people will see the torque spec. Thanks as always for the info. I learn a lot from your comments!

@hawkinsjd11 2 жыл бұрын

I would recommend pulling the plug prior to pulling the tube. you do not want to be fishing bits out of the block.

@JAYREAD 2 жыл бұрын

Good thinking!

@chrisandonas1105 2 жыл бұрын

Always a pleasure watching you manage to get the job done. Inspiring indeed!

@JAYREAD 2 жыл бұрын

Give it a shot, Chris! You’ll be surprised how easy it is!

@IttNeverTooLateToRace-qz2gn 2 ай бұрын

Great video Jay. I really like your videos because not only are they very informative, but entertaining as well. You have a great attitude and your enthusiasm for your Boxster comes through in every video. Keep up the great work!

@JAYREAD 2 ай бұрын

Hey thanks a lot! ❤️

@arielquintela452 2 жыл бұрын

Jay, Always interesting videos that help many.. Kudos ! You make it look simple. Hope your Mum us well.

@JAYREAD 2 жыл бұрын

Thanks Ariel. She’s fine, thanks for asking!

@hallamring2036 2 жыл бұрын

Good job Jay. Done this several times. Nice to see you loving the Boxster back to top shape. Remind people to be safe and use jack stands as safety backup. Yup spark plugs first then tube, either way you managed it well! Keep up the great videos.

@JAYREAD 2 жыл бұрын

Thank you!

@IttNeverTooLateToRace-qz2gn 8 ай бұрын

Great video Jay, thank you. As a newbie to a 1999 Boxster your videos and help are greatly appreciated. You do a nice job on your videos. I plan to change out the plugs, tubes and coil packs soon.

@JAYREAD 8 ай бұрын

Thank you! Go for it! It’s easier than you think!

@andrewlundie8155 2 жыл бұрын

Thanks Jay. You make it look easy . I'll certainly give it a go next time. Looking forward to seeing how you get on with the hood.

@JAYREAD 2 жыл бұрын

I think it IS easy actually. It must be if a moron like me can do it! Definitely give it a shot and you’ll see. God, I hope I make the hood look easy too! Hahaha!

@Waskar11 2 жыл бұрын

Perfect timing for this video as I’m doing this exact job this weekend. Independent shop was going to charge me over $1500 to do the job. Glad to hear it’s not a headache.

@JAYREAD 2 жыл бұрын

It’s really easy actually. Save yourself $1,150!

@uspaint 4 ай бұрын

Great looking boxster and good video.

@LetsDIYIt 2 жыл бұрын

Glad you got good use out of the spark plug tubes and the boat plug. Also good to see that the boat plug worked so well.

@JAYREAD 2 жыл бұрын

Thanks Mike! Yes, all of it worked so well!

@cjjohnson6085 2 жыл бұрын

Great job Jay 👍🏼

@JAYREAD 2 жыл бұрын

Thank you, sir!

@marksaville9211 9 ай бұрын

First time on your channel, I have a 987 Boxster. Really good watch thanks. You seem like a good guy.

@JAYREAD 9 ай бұрын

Thanks a lot, Mark. Really happy to hear that you enjoyed it! Viva 987!

@Canadian_Icecube 2 жыл бұрын

Watching because I am quite certain this is in my future. Thanks!

@JAYREAD 2 жыл бұрын

Glad to be of service!

@NZGilead 2 жыл бұрын

Nice to you to take care of this little marvel.

@JAYREAD 2 жыл бұрын

It’s is a little marvel! Unlike me!

@wafflesnfalafel1 2 жыл бұрын

lovely vid sir - I was thinking that would be a total PITA.

@JAYREAD 2 жыл бұрын

Hey thanks! Not at all as it turns out!

@tomdevadder262 Жыл бұрын

I need to do this also on my 996 I have misfire every time I wash my car soo I order 6 new coils hope to do this next weekend with your video 👌🤜

@JAYREAD Жыл бұрын

Good luck! Glad to have been able to help!

@alphaboy1872 2 жыл бұрын

Jay nice work! Interesting sounds your ratchet makes.

@JAYREAD 2 жыл бұрын

I get that a lot. Thanks!

@boffam00 2 жыл бұрын

If you still have your tool kit there should be a bar with a threaded end. This is a wheel hanging tool that makes dismounting and (especially) mounting the wheels much easier.

@JAYREAD 2 жыл бұрын

That’s really helpful actually! I hate putting the wheels back on! Thank you!

@mischiefpwns 2 жыл бұрын

Funny enough, just did this job a couple weeks ago and it fixed my misfire and the car runs so much better. Wasn't a hard job at all with the right extentions.

@JAYREAD 2 жыл бұрын

It definitely makes a difference. Worth doing! One thing off the list anyway!

@garrywood7778 21 күн бұрын

Thanks been a great help

@JAYREAD 21 күн бұрын

Glad to hear!

@fonzebonez4878 2 жыл бұрын

Jay you are absolutely golden! Thank you for all this great content. I’m a new subscriber. Curious what wrist watch you been wearing in you’re videos . Omega aquaterra ? Cheers mate 🍻

@JAYREAD 2 жыл бұрын

Hey thanks for subscribing! Yes, Omega Aqua Terra ‘Bumble Bee’!

@zygarde2162 2 жыл бұрын

Just curious re the installation part of the process. No issues with the removal process but would you have been better off bolting down the coil pack for the middle cylinder last as it would free up more working space to get at the bastard cylinder. Hope this makes sense….

@JAYREAD 2 жыл бұрын

Haha! It is a bastard too! No. The problem is not being able to see and doing everything by feel. There’s enough space between the coil packs.

@boffam00 2 жыл бұрын

Great work! This was the first job I did on my 996. It was a bitch. Access is a lot better on the 986…in hindsight I would have manned up and removed the mufflers.

@JAYREAD 2 жыл бұрын

Yes, it is harder on the 996. 986 not so much! Thank you!

@hawkinsjd11 2 жыл бұрын

I have never see "Vario" anywhere on my engine block. I am wondering if you have had some upgrades or replacements done to your engine?

@JAYREAD 2 жыл бұрын

Good question! It actually says ‘Vario Cam’.

@jamesbarratt593 5 ай бұрын

misfire on 2,3,4,5 and not the other 2 cylinders. What do you think is the reason for this. Obviously be a few things. Tell me what?

@hangpilot1200 2 жыл бұрын

Question... could a plug fall into the valve cover without the spark plug tube in place?

@JAYREAD 2 жыл бұрын

Don’t know. I wouldn’t think so. However, another subscriber commented that you could lose bits of the tube in there if you took the plug out first.

@amvale01 2 жыл бұрын

It looks like you may only be using a floor jack. If that is the case, please pick up some jack stands for safety reasons.

@JAYREAD 2 жыл бұрын

OK!

@leemitchell1874 2 жыл бұрын

@@JAYREAD Don't. Russian roulette while lying under a car because you didn't use stands adds an extra element to these vids that can't be underestimated.

@TheLambo123254 2 жыл бұрын

nice

@johnmorgan7262 2 жыл бұрын

why wouldn't you remove the plugs before removng the tubes? I seems like they could drop in the pan?

@JAYREAD 2 жыл бұрын

They tell me that there is a greater chance of a crumbly tube going in than a plug but, as you know, I know pretty much nothing!

@rogerp6903 2 жыл бұрын

The first time I have seen another Boxster with the same colour cobo as mine, Is it an S version, Mine is a 2000 S. From Porsches registry there were only 2 made in the world for the year 2000

@JAYREAD 2 жыл бұрын

Aha! Mine’s a 2001!

@charitho1 2 жыл бұрын

What is that tool you used to remove the coil tubes?

@JAYREAD 2 жыл бұрын

That’s a boat transom plug. Worked brilliantly!

@Bonspieler 2 жыл бұрын

Great video. TBH, I'm concerned about all that oil in the tubes. Where did it come from? It's obviously leaking down on the rest of the motor as well. It's always something, isn't it?

@JAYREAD 2 жыл бұрын

Isn’t it?! They tell me it’s the valve cover gasket. Does that sound right? I’m hoping that the improved O rings on the new spark plug tubes will help.

@Bonspieler 2 жыл бұрын

@@JAYREAD More than likely. I have a 997.1 and I can't even imagine what a job that would be with the motor in the middle. But that is a fair amount of oil leaking out. Were the other cylinders as bad?

@JAYREAD 2 жыл бұрын

@@Bonspieler Not sure. I didn’t look inside each of them. The valve cover gasket will get done soon and that will hopefully sort it.

@hawkinsjd11 2 жыл бұрын

you will want to retorque the spark plugs after 1000 miles. If you do not do this they will produce a chirp eventually at cold start. I spent days attempting to find the reason why my car made a chirping noise at cold start. I retorqued the plugs and the chirp went away.

@JAYREAD 2 жыл бұрын

Thanks. Very helpful!

@adamjeziorski3796 7 ай бұрын

"produce a chirp"? How about a ticking noise? Would that be possible?

@hawkinsjd11 2 жыл бұрын

Stop copying me Jay! I just did coils 3 weeks ago.

@JAYREAD 2 жыл бұрын

This channel’s strapline is ‘a day late and a dollar short’. Sorry Jess!