Changing the Motor in a Axial Scx10 ii
Рет қаралды 26,491
4 жыл бұрынShowing you how to change the motor in a Axial Scx10 ii Deadbolt. Going from a 35t to a 27t motor to get a little more wheel speed in my rc crawler. Doing a motor swap in your rc cars, rc trucks, and rc buggies is a quick way to make your rc faster
This list contains my affiliate links
Ebay
rover.ebay.com/rover/1/711-532...
Subscribe
/ @jessebmotors
Email: jessebmotors@gmail.com
Follow me on
Instagram / jesse_b_motors
Tictok vm.tiktok.com/gQd3Dh/
Facebook / jessebmotors
Pinterest / jessebmotors
#jessebmotors #axial #rc
@JesseBMotors 4 жыл бұрын
This list contains my affiliate links Axial 27T 540 Electric Motor amzn.to/2AjOGuq M3 Mini GPS amzn.to/38uy9PD Ovonic 11.1V 2200mAh 3S 50C Lipo amzn.to/3bs5D2Z
@theworldsokayestmichigande851 Ай бұрын
I've changed hundreds of motors in my life, but you know damn well that I'm gonna watch you change a motor cuz it's RC content.
@DustinWoloschuk 7 ай бұрын
Thanks dude!!! This was a great video!!! Super aimple and straight forward. I needed to change the motor in my son's truck and had zero idea whatvir where to start. This video 100% removed the intimidation factor and made it super easy!!! Thanks again!!!
@brianonthego 2 жыл бұрын
Thanks Jesse. My junker scx10 ii has a 45t, so now I know it's good for crawling.
@MAPAHaus5 3 жыл бұрын
Great instruction. Thanks for the vid, I needed it today to change a motor on my scx10
@JesseBMotors 3 жыл бұрын
Glad you liked it and thanks for watching 👍🏁
@mypassionrc-studioxd40lous66 4 жыл бұрын
Awesome video, lightning speed 😁, deadbolt looks awesome 🌇😎
@JesseBMotors 4 жыл бұрын
Thank you and thanks for watching 👍🏁
@jdsrcs8061 4 жыл бұрын
Great comparison between same size but different turn motors!!!
@JesseBMotors 4 жыл бұрын
JD'S RC'S thank you and thanks for watching 👍🏁
@907arcticrc6 4 жыл бұрын
Awesome video and Rc as always bro Great job on rc and shots Have a good one my friend stay safe 👍🕶👍
@JesseBMotors 4 жыл бұрын
Thank you and thanks for watching 👍🏁
@TheRCAdventurist 2 жыл бұрын
Awesome video my friend. Thanks for sharing it. Subscribed 😎
@JesseBMotors 2 жыл бұрын
Thank you 👍🏻
@RCplamodel 4 жыл бұрын
Very informative video, Thanks for sharing! 👍🏻😀👊
@JesseBMotors 4 жыл бұрын
Thanks for watching 👍🏁
@panzadeviborarc9613 4 жыл бұрын
Great bro!! I´d like to change to my AxII the motor, the same as your!! for 27 t too!! Thanks for share how to bro!! Have a great day
@JesseBMotors 4 жыл бұрын
You’re welcome and thanks for watching 👍🏁
@KurtsRCs 4 жыл бұрын
Nice upgrade got it to go a little faster
@JesseBMotors 4 жыл бұрын
Thank you and thanks for watching 👍🏁
@islandrc-duke1972 4 жыл бұрын
Nice motor swap,nice video
@JesseBMotors 4 жыл бұрын
Thank you and thanks for watching 👍🏁
@fredfredrc 4 жыл бұрын
Great, have a good day my friend 👍
@JesseBMotors 4 жыл бұрын
Thanks for watching 👍🏁
@gegerc3689 4 жыл бұрын
Cool upgrad✌🏼👍🏼
@JesseBMotors 4 жыл бұрын
Thank you and thanks for watching 👍🏁
@gegerc3689 4 жыл бұрын
✌🏼👋🏼🤙🏼
@blackwolfrc 4 жыл бұрын
Great video
@JesseBMotors 4 жыл бұрын
BlackWolf RC thank you and thanks for watching 👍🏁
@bobaque70 4 жыл бұрын
Nice Jesse B
@JesseBMotors 4 жыл бұрын
Bobaque Altered RC thank you and thanks for watching 👍🏁
@johnknight134 2 жыл бұрын
Thx. Very helpful.
@JesseBMotors 2 жыл бұрын
Thanks for watching and don’t forget to subscribe if you haven’t already.
@fernsolo 4 жыл бұрын
Great comparison, let recomend the holmes hobbies sport series, very budget friendly and smooth running motors 👍
@JesseBMotors 4 жыл бұрын
I heard about those after I bought this one 🤣. I still might look at one. Do you just order them from Holmes? Thanks for watching 👍🏁
@fernsolo 4 жыл бұрын
Holmes Hobbies, Amazon, Ebay or some hobby shops
@scaleaddiction 3 жыл бұрын
That's was a good video 👍
@JesseBMotors 3 жыл бұрын
Thank you and thanks for watching 👍
@LifeofMurphysOutdoorsChannel 4 жыл бұрын
Nice video.
@JesseBMotors 4 жыл бұрын
Thank you and thanks for watching 👍🏁
@poppysrcandmodels 4 жыл бұрын
That is fantastic Jesse! It's amazing how much difference you get in different winds of motors! Are you running the stock ESC? I didn't know it could handle 3s, take care my friend!👍😎👍
@JesseBMotors 4 жыл бұрын
Poppy's R/C and Models I’m running the stock esc. I want a hobbywing 1080 but got to many projects going on right now 🤣. Thanks for watching 👍🏁
@poppysrcandmodels 4 жыл бұрын
Ok, thanks! Have a wonderful weekend!😊
@RcNickster709 4 жыл бұрын
Yup nice work bud. Boy. if I had a dime for every time I have taken a transmission out of these axial rigs.. lol Just a note too, that if you want a little more wheel speed with out changing the motor. You can increase the size of your pinion as well. But keep a close eye on motor temp. Nice work bud. Thumbs up
@JesseBMotors 4 жыл бұрын
I figured I wanted to do this once so I went with the motor. I didn’t want to do a pinion then get it to hot and have to change it again. Thanks for watching 👍🏁
@RcNickster709 4 жыл бұрын
@@JesseBMotors Good choice.. :P
@ByronRC 3 жыл бұрын
How do the plastic gears hold up on 3s and is there much of a difference in speed running 2s?
@JesseBMotors 3 жыл бұрын
Gears are fine and speed is a couple mph slower on 2s. Thanks for watching 👍🏁
@bobmm1076 2 жыл бұрын
Do you have to shim between the teeth so its not pinching? Also, is there grease that needs to go on the teeth before closing up? I saw some from when you opened it.
@JesseBMotors 2 жыл бұрын
You use a piece of paper in between the gears for proper mesh. I grease everything on my crawlers cause I run them in water. Thanks for watching and don’t forget to subscribe if you haven’t already 👍🏻
@claytondunlop248 4 жыл бұрын
Not bad...if u changed ur pinon n spur gear it should go faster too right?
@JesseBMotors 4 жыл бұрын
It will go faster with a gear change. But I think it would take a lot of gear to do it. Thanks for watching 👍🏁
@armorhobbies Жыл бұрын
pop a 15t pinion on it and that should speed it up just a little bit more. I tried it on my 10ii trail honcho and it sped it up a bit.
@rcpete7055 3 жыл бұрын
What's the difference between the 87t Spur and the 56t Spur please? I'm still running stock 87t Spur with 27t motor and 2s lipo.. What would be benefits of changing the Spur please?? Anybody
@JesseBMotors 3 жыл бұрын
A 56t spur would give you more speed. You want torque in a crawler. Thanks for watching!!!
@brianyaconelbarayonfarm7177 Жыл бұрын
how much length? this motor 27T
@3TRCGarage 4 жыл бұрын
Are you going to try and get more wheel speed with more mods> Maybe a gearing change? Reminds me of the Redcat Wendigo which seems to be overpowered for crawling but fun for the type of trailing you do. I like having some wheel speed on my SCX10 II Honcho. Thanks for the tutorial Bro! Take Care 👍🏾👍🏾
@JesseBMotors 4 жыл бұрын
3T- RC nope I’m leaving it where it is. I’m probably going to order a different esc and controller for it and call it done. Thanks for watching 👍🏁
@hazards20001 3 жыл бұрын
Higher C rated battery will help
@JesseBMotors 3 жыл бұрын
Changing gears would to but I wanted to do a motor change video and these motors are cheap 👍🏻
@MrTylerg506 3 жыл бұрын
The mesh in mine sounds funny how do I fix that?
@JesseBMotors 3 жыл бұрын
I put a piece of paper in between the gears. Thanks for watching 👍
@derekdriver251 Жыл бұрын
Try a 3s 5200mah battery
@JesseBMotors Жыл бұрын
I’ve ran 3s. I’d get bored before a 5200 mah would die.
@tryintosurvive88 2 жыл бұрын
Why upgrade to a smaller motor?
@JesseBMotors 2 жыл бұрын
I wanted more speed out of it for the way I use it.
@TheMastermiller01 4 жыл бұрын
Ima get one of those gps units, I’ve put my phone in my 10.2 and it read 30 and I don’t believe it
@JesseBMotors 4 жыл бұрын
Jesse Miller it’s a good gps. Thanks for watching 👍🏁
@bray0_o32 3 жыл бұрын
Please tell me the rims and wheels you have on
@JesseBMotors 3 жыл бұрын
The rims and wheels are both from Injora. I got them on Amazon. Thanks for watching 👍🏁
@bray0_o32 3 жыл бұрын
Jesse B Motors thanks I saw your other video last night I’m probably going to get them for my deadbolt
@JesseBMotors 3 жыл бұрын
Bray0_o I really like them and haven’t had any issues with them. Just putting all the screws in sucks lol.
@bray0_o32 3 жыл бұрын
Jesse B Motors are the tires good for rock climbing?
@JesseBMotors 3 жыл бұрын
Bray0_o yes! I have videos of it on rocks at my local lake.
@erazco6568 5 ай бұрын
That’s to slow for me I’m building a rock bouncer I need something that will launch
@tobydyes 2 жыл бұрын
brushless
@JesseBMotors 2 жыл бұрын
Is always better 👍
@tobydyes 3 жыл бұрын
Bigger pinion smaller spur do the same thing
@JesseBMotors 3 жыл бұрын
Yes but that doesn’t make a good video to make. Thanks for watching 👍🏁
@cashbazemore1739 2 жыл бұрын
3s in an scx10 :(
@JesseBMotors 2 жыл бұрын
Why’s that sad?
@cashbazemore1739 2 жыл бұрын
@@JesseBMotors I've never heard of such thing. that's how I smoked my scx10
@JesseBMotors 2 жыл бұрын
@@cashbazemore1739 mine runs fine with my setup.
@cashbazemore1739 2 жыл бұрын
@@JesseBMotors oh, I went into my local hobby shop and they were stunned to see a 3s in my crawler. but I will definitely look into that. thank you.
@tobydyes 3 жыл бұрын
Do yourself a favor and buy a real screwdriver set
@JesseBMotors 3 жыл бұрын
Use the links below and that helps the channel out for better products. Thanks for watching 👍🏁
@eazymuney243 3 жыл бұрын
A 9T is a good motor is a lil faster
@JesseBMotors 3 жыл бұрын
Might be to fast for a crawler 👍🏻
RC & plamodel
Рет қаралды 20 М.
HolmesHobbies
Рет қаралды 127 М.
Football Cartoon
Рет қаралды 19 МЛН
Funny Old Man's Family
Рет қаралды 50 МЛН
Max Design Pro - Creative Animation Channel
Рет қаралды 1,6 МЛН
KinoPlenka96☝🏻
Рет қаралды 1,3 МЛН