Serghei - thank you for this incredibly helpful video and your excellent, clear descriptions. I had a problem with a leaking cam housing on the passenger side of my 2011 SR5 and, in lieu of a $2700+tax dealer estimate, attempted to fix it use a shortcut published in another video. That video was fine but I misunderstood what was involved with the tensioners and messed it up. Using your video, I was able to take the timing chain cover off and get both cam housings sealed as well as recover from my mess-up. I haven't worked on an engine in over 20 years and I don't think I could have done it without your video. Thanks again!

You are great at explaining all the steps very throughly, I appreciate your expertise... thanks for making a difficult job seem much easier

Great video. One old trick to keep the chain on the sprockets, put a zip tie around where it wont come off the teeth. Once its in place, cut the zip tie.

Serghei EXCELLENT VIDEO! Thank you very much for sharing. You explain very well what you are doing. It is a time consuming job as I can see. I have a 2010 Toyota Tundra, I use the Mobil 1 motor oil. I did the timing belt on my 2001 Toyota Tundra 4.7 engine about 10 years ago. I have replaced many timing chains and gears on the 1960's Pontiac engines. I replaced the timing chain on my older Brothers 1953 Buick Roadmaster this past march. Brother is 83 years old now soon to be 84. Brother taught me a lot of what I know. I have always been intrigued and fascinated with timing chains and engines on how they work. THANK YOU VERY VERY MUCH

317k miles on mine, got a primary tentioner out and I dont want to blow this motor so ill be doing it this weekend, this was very useful video

One of the best timing chain replacement videos I've seen. Thank you.

Буду учить технический английский по твоим видосам.

Great tutorial! So I'm going to buy Toyota and go to Tundra :))

Well done!! Thanks for this video. My chains and tensioners need to be replaced, and now I have the confidence to do it myself!!

Great video. I’m in the process of researching this job for my tundra and your video was a great help. Thanks!

I don't even own a Tundra, but enjoyed watching 👍🏼

That is a pretty involved job. Good job Sergei. I hope my Tundra does not need this work until 400 000 kms or more.

Thank you for this video! Really saved my butt on my 2008 3UR Sequoia. I’m swapping all the same parts this weekend on mine, nearly ready to take the covers all off. Honestly the most annoying part of this whole thing is the wiring harnesses. They did not make it easy to work on with regard to those.

I did the same Job on A 5VZ FE v 6 that took me all weekend. it looks likes Childs play compared to the 5.7 Great Video!

Serghei I am looking to buy a Toyota Tundra and you have shown how well put together they are. Great information. I've subscribed and will watch more of your videos... Спасибо и удачи вам.

you are my new hero! thank you

Very good video and procedural explanation of work. Huge thumbs up!

Toyota uses the best chains in the bussiness. Either that has over 300thousand miles or oil changes were not done enough

Thank you VERY MUCH for making this amazing content. Now I can finally do my own. 🙏🏽🙏🏽🙏🏽🙏🏽

I usually use Royal Purple assembly Lube on the chains and guides and gears. Its very sticky and will not drip if used right for the jobs. But nice to see you lube the chain with oil before closing up. I see WAY to many techs and people start then dry and that will cause wear that is not wanted on first fire up.

It was a good job, thank you for sharing with us.

Very very good job my friend from Fresno California,USA

Amazing!! Thank you. I admire your patience

Thank you for your insightful instruction

Excellent content. Thank you for sharing

Сергей привет, лайк!

Great video well detail step by step wonderful job!!!!

Awesome video. You covered all the key points. This was really helpful.

I think bare rims on the front of the truck and then Lowering it would help a lot of folks!!!

Thank you so much for this video!!

Excellent work my friend Brilliant video 📹 👏 👌 👍

Fantastic video. Great repair job!

Excellent work. Super detailed video.

Excellent video that either convinced me I can do this or perhaps I should pay someone else to do it. 😊

Well done!!!

Сергей привет, давно тебя не было, когда новые видео будут на твоём канале турбоманьк?

Thank you, this was a great video

Thanks for the video Serghei I have the timing chain slapping on drivers side, started only at cold starts but it is more prominent now, I thought I could get away with just changing the tensioners, what parts kit did you use

Good Job Brother!!! Really educational video

There are a lot of really smart Russian mechanics on KZfaq.

Great Vid Do you have the description of how many tourque which bolt gets?

Отлично Сергей, снова порадовал своей квалификацией .сколько миль на моторе? У моего сына lexus ,тоже 5,7 литра, немного меньше 200 тысяч миль, в основном по freeway, рекомендуют эту работу на 300 тысяч миль, как проверить или нужно делать это на 200 тыс. ? Спасибо и удачи, ты ее заслужил своей головой.

Do you have a parts list brother? -im wondering if the cam phasers and phaser chains are the same part numbers, or are they the same on both sides or...?

This was an excellent video

Wow that's a lot of work. I heard it's a common issue with Toyota 8 cylinder engine for the timing chain cover to leak.

Thank you for sharing this video. So far it is the best tutorial I have found in doing this job. However, I am having a hard time getting the wiring fully disconnected from the lower sides of the engine to push it out of the way of the valve covers. Do you have any suggestions for that?

Great job, thank you so much!!

Good job

Great video my friend 👍 thank you!

Really nice work

Приает , скажи ценник за замену грм на тундре . Когда косу подкапотную отстегиваешь , что бы немешплась и неполамались провода на капот вверх стяжками стягивай .

2:12 I thought you will notice that main radiator is leaking under the coolant tank before reinstall it but seems like you haven't replaced it.

Awesome man! Better than turbomaniac!!😀👍

Good job brother.

Next time try to unscrew crankshaft bolt by using starter. Just put head on the bolt and extension on the left side of the frame then click starter once. One guy tough me this tip on subaru's engine.

What’s the brand name of that complete kit??

love our videos. I have a question . Recently Ive been offered a, 2015 Toyota Tundra TRD - SR5 _ with the 5.7L 8-Cylinder Gas Engine . Miles are under 80 thousand . Its absolutely imaculate. The only thing is its 2WD and not the 4WD , but I prefer the 2WD since it hasnt snowed where I live in 8 years. I can get the truck for under $20 thousand. I would love your advice. I really like this Toyota engine and its a crew cab. Thx Buddy. fyi, when do you need to change a timing chain on this engine ??

How much more involved would it be to remove the front of the truck to have better access?

Hey Sergey, Thank you for this video. Helped me to change my timing chains and tensioners. I have a question for the oil pump: do I need to do some priming with oil before I start the engine with new pump? Thank you!

Молодец Серега! You have a good one!

Great job sir..

Very well done video

Great video. what about replace the head gasket? do you have a video replacing the head gasket?

How many miles did you have on your tundra before timing change??? I have 2008 with 180k miles on it still running good.

Great job

Good Video

I'm about to tackle mine. I have issue with chain tensioner. Since I'm there I may replace the whole timing. Can you let me know where did you order the kit? By the way awesome job.

Jeeez hard to believe that has 200k on it. Just broke open mine for head gaskets, and I always thought I took good care of it. 263k miles and it’s looks stained with coffee😳. Diiiiiiirty! 😬

Good fix man toyota should have build the 4L tacoma like that, thats why the taco is so weak!

Hi Serghei, What year and model is the Tundra? Where did you get the timing chain replacement kit from? Great Video.

Hey great job, one quick question! How many mile on the engine at time of performing the job?

Good Job!

Great video! You do great work especially recording the procedure for us. I'm subscribed. I didn't see how you set the timing before you removed the valve covers. Did you just move the crank. What did you look at to know its lined up?

That was great! Thank you!

Exelente me gusta nada roto y golpes hese es un mecánico de verdad

thaks bro new information

Amazing clean engine for 200k - how often do you change your oil? What brand do you use? Thanks. I have 345k on my Tundra.

When i start removing the chains do i need all the colored links lined up or can i just put cam marks up ?

So I had to do the head gasket on my truck (2014tundra 5.7l 3UR-FE)and I’m putting it back together now but after I get all my marks lined up and everything in time, when I manually turn my engine (28 times) my small chains don’t match back up but my big chains do. What am I doing wrong?

hi is there a gasket for the right hand side primary tensioner like on the lh side? im having a hard time remerbering thank you

👍

Before you go through the effort of doing this try to put marvel mystery oil in your truck. Just got rid of my rattle. The oil gets gummed up and causes the tensioner to stick in many cases when it is otherwise functional and without defect.

where i can buy the all set

Where do you order your kit a special tools

where did u get parts?everythings on back order.waiting over 6months for mine to get fixed.mech said sprockets hv to be expensive toyota brand($850/piece).is that true?

Do you happen to have a list or links of all parts needed to do this job?

What is the part number for the oil pump pickup seal? I’m having a hard time finding it.

Серёга, при замене цепи ГРМ на Мазде надо менять натяжитель?

Э! Почему не на турбоманьяке? Да потому что для америкосов видос! Верно?

They never stretch. It's one of the biggest, best-built chains on anything. Unless the engine overheated & ran hot for way too long, the factory paint timing marks are visible. If they're faded or gone, replace it due to uncertainty. But as a rule they just don't fail.

❤

Great video man. It really helps people understand why it's such a big bill to do the master timing kit on these trucks. Don't you think 200k is stretching it a little bit though

What would be a good price Is too pay to have that done

Looks like it is a very difficult job sir.

Do u know wat is the torque spec on the crank pulley bolt?

Hello I have a 2011 Toyota Trunda 4x4, 178000.00 miles on it. There I a sound that I haven't had before. 😅

Привет Серый! Все четко! 200т. движок чистый!!! Какое масло пользуешь??? спасибо!

What is the cost of the spare parts? Do you recommend any manufacturer??

You could have simply done the one bad tensioners and saved a ton of money, the chain and gears where fine.

What parts or kit are you using?