How to Make an RV Insulated Skylight Cover

No video

How to Make an RV Insulated Skylight Cover

Рет қаралды 17,133

Күн бұрын

RVing in the cold presents all types of challenges where some are easier to overcome than others! To make heating our RV the most efficient it can be, I always stuff insulated 'pillows' into the 2 vent openings in my ceiling to prevent heat loss. Another area of heat loss is thru the large skylight in my shower. When nothing was available commercially, today I show you how I made an Insulated Skylight Cover!
We are an Amazon Affiliate, and would greatly appreciate your support by using the link below for all your future Amazon.com purchases. It will be totally transparent to your Amazon shopping, and doesn’t cost you a thing!
amzn.to/2HZTbZA
Camco 45164 62" x 30" SunShield Reflective Window Cover
amzn.to/32yRuSJ
Professional Grade Aluminum Foil Tape - 2 Inch
amzn.to/3H6F2Z7
Hurricane Panel - 24”x36” Clear, Polycarbonate
amzn.to/3muHm4h

Пікірлер: 15

@fmoreira2727 2 жыл бұрын

I was looking for a way to insulate my unused skylight at home and I think it’s a perfect solution!

@markpawlowski6463 2 жыл бұрын

That’s a real good job looks like you bought it in the store.

@petenelson8136 Жыл бұрын

Nice work. I purchased one of these for our shower and it kept falling out due to the curved upper surface so I returned it. I've go 2 pillow type in my 5th wheel, and I'll be making one of these for our shower. We FT and winter over in IN where it got to -17 last winter so having the skylights covered will certainly help.

@TheMinnow101 2 жыл бұрын

$52 for that poly panel? Plus the added cost of the Camco window insulation. Think I’ll use a piece of luan plywood and wrap it in reflectix for about $20 all in.

@ralphb.3802 2 жыл бұрын

I made one of these for my travel trailer shower skylight. I was concerned the UV rays would cause damage and to keep the extreme heat out during the summer. I like the foam core and the handle idea. I would have never thought of that. Thanks.

@albathomas246 2 жыл бұрын

Thank you, I can now follow your instructions

@Landy-lu9vx Күн бұрын

🎉🎉🎉

@williamlandry8081 2 жыл бұрын

Great Idea! Thanks.

@billk8817 2 жыл бұрын

I like it. I have the shade and foil tape on hand. I believe I will dry fit it before adding the foil tape to the final product. Thinkin' I need to cheat by about 1/8" off the plastic ??

@welshxrp906 2 жыл бұрын

Could you have used 1 inch covered foam?

@crapseven 2 жыл бұрын

Any issues with condensation?

@marylambert-watts7695 2 жыл бұрын

What measurements did you use to allow for snug fit or does the foil wrap compress and expand to stay in place?

@charlescoushaine 2 жыл бұрын

Cut panel to fit and let wrap cause the press fit!

@Me-je2jv Жыл бұрын

Would this work to keep the heat out?😊

@timothylinn Жыл бұрын

Yes. Don't touch the surface of the window after you remove it though. If it is still hot and sunny outside, the window surface can severely burn you.