Can't wait to put this band saw to work. Opens alot of opportunities!

Thank you!

Thank you! I used this to carve out a shape on a 9" solid block of pine. This machine is a beast! instagram.com/p/B3Elp3wH9Ro/?igshid=2n7f2v5yd51j

Thanks for watching!

😂I probable was a bit! It's a great bit of kit and thanks for watching!

Thanks Warren!

Thanks Warren! Really happy with it So far

Thats a nice saw! Congrats! Wish this one was a bit bigger but works great though

I haven't repurposed the old band saw yet, but i have seen it done. The tricky bit is you have to make the belt for it. There are a few videos how to make your own sanding belts though but not specifically for a bandsaw. I will go ahead and make a video on it!

the guide bearings were a bit fiddly and would have needed a whole new video! the best video I have seen for setting the bandsaw correctly was on the wood whisperer channel, here's a link kzfaq.info/get/bejne/mN6GrK6kx9vbioU.html this method worked perfectly for me!

Thanks.for.your comment, the first or second time you adjust them it does feel a little fiddly. But.i.have found it a just getting used to a new system. Initially I followed charnwoods instructions exactly and they are a littke fiddly. I watched a few "How to tune your bandsaw" videos and realised it's not difficult at all. If you check my Instagram page , I cut through a 8" x 9" block of solid pine with no issues at all. instagram.com/p/B3Elp3wH9Ro/?igshid=z4fnj96ah8l4

The w730 looks great and yandles has it at an amazing price! This model is new and wasn't available when I got the b350. It looks comparable and is £150 cheaper. I am not a big fan of scheppach although i have never tried this bandsaw. My concern with them is more their customer service and returns policy. Any issue you have with their products needs a formal investigation and you need to ship the defective product back at your cost for them to decide what to do. I know alot of people swear by their tools but maybe I just had a bad experience. This is my second large Charnwood saw and i have no complaints at all

thank you! very much appreciated! still love this bandsaw, I use it almost daily and it gets worked a lot. as for the paint issue, I touched it up with some rusto-leum and haven't had any issues. I find the perfect size blade for this was the 3/8th width, lets me do all the curves and straights that I want. don't regret this purchase at all. just wish I had also purchased the movable base. this is a heavy sucker! you wont regret it and definitely spend some time tuning it.

@@JohnathonWhittaker Much appreciated, I'll run it for a couple of months and if all is well give it a touch of paint assuming they haven't improved on that aspect. I'll probably build a moveable base sooner rather than later. All I've got to do now is convince myself that I really don't need to upgrade my table saw as I rather liked your one!

Just realised, I thought your name & work was familiar you're on Woodworkers UK!

@@madhamish01 yup! Must mean we are almost family 😁

@@madhamish01 ah love my table saw too! But if i was to choose, band saw. I use it way more. But saying that, there are a few crucial things that a bandsaw just cant do! Fast repeatable straight cuts, strange fixed angles, speed for multiple cuts. Sorry, not helping 😁. For me and what i do, sculpture and carving, a bandsaw is great. For general woodworking, i woukd say table saw

5mm difference is fine and perfectly normal. Each brand maker is slightly different. The saw can tighten blades up to 65 mm so there is alot of room to play with.

Had this for 7 months now I think and I love it. Wish I had bought one sooner! Well worth the purchase. Important things are to set it up well and adjust the bearings correctly. Also buy decent blades. I can easily cut through a 9 inch slab of pine with little hesitation in the motor. Only con is i need to readjust the fence periodically but I find that's the same with the majority of band saws. Besides that, no issues at all. Also I wish I had gotten the wheel base accessory. This thing is heavy and I do need to move it regularly.

@@JohnathonWhittaker glad it turned out to be a good purchase, thanks for the feedback, appreciate it loads. I'll be doing an unboxing video of my own when it arrives. I'll link yours if you don't mind as the video I watched!

@@andy.elliott.foreverpens cheers bud, it's a great saw, you won t regret it

I have had to re-tension the bottom wheel a few times but the tracking has been just fine. I routinely change between a 1/8th And a half inch blade as well so I regularly need to adjust for blade change

Hi Brian, yes still love it and use it almost daily. Once i got it set up and tuned right it does everything i want it to. Would definetly buy again. Only wish i had bought the movable base as well. This thing is heavy!

@@JohnathonWhittaker Hi Jonathan, thanks, there is another company called Lumberjack who have exactly the same machine. Even the wording of the description/spec. is identical. They are around the same price s the Charnwood model but just offered me a 10% discount. I will chat with Yandles to see if they can do similar. I will get the wheel base. Have been also looking at the Record Power machines which I really like but the 300E is £110 more and 350S £160, somewhat over budget. Will let you know how I get on.

@@brianjenkins7989 I haven't seen the lumberjack one, will take a look. yandles are pretty good at matching prices, family business and they are very helpful

@@brianjenkins7989 its almost like they cut and pasted the description! not many reviews but mostly seem positive

@@JohnathonWhittaker I agree, but I am hopeful Yandles will be helpful.

Thank you for That, this saw was suprisingly easy to assemble and well set up straight out of the box. Have returned the sub and am looking forward to.checking out your videos!