No video
THIS is why my Motovlog Helmet setup is better than yours…
Рет қаралды 141,613
Күн бұрынSecret Project for Motovloggers... Sign Up for Early Access: bit.ly/c2wcomingsoon
So you want to ride your motorcycle around and record it but all the stuff you've tried sucks? In this video, I'm going to break down my MotoVlog Helmet setup and give you all my secrets to how to get THE BEST Video and Audio possible out of your riding footage.
PS: Purchasing from the links below don't cost ya anything but REALLY help the channel out so thanks to anyone who uses our affiliate links.
Secret Project for Motovloggers... Sign Up for Early Access: bit.ly/c2wcomingsoon
Easy Set up
- Electrical Tape for Vents - amzn.to/4chGCYw
- JB Weld ClearWeld Quick Setting Epoxy for Camera Mount - amzn.to/49Qy7lQ
- Cardo Bluetooth Communicator - cardosystems.rfrl.co/q9d12
- DJI Osmo Action 4 - bit.ly/C2WAction4
- Insta360 Ace Pro - www.insta360.com/sal/ace-pro?...
- Purple Panda Mic - amzn.to/4abyhUB
- Osmo Action 4 Cage - amzn.to/4auEnQf
Pro Set Up
- Expensive Mic Chase uses: amzn.to/4adZ9n4
- Rode Wireless Pro - amzn.to/3Tz1L9h
🔧 We GIVE AWAY bikes we build. Get a chance to WIN!
Sign up here: wbrgarage.com/
................................
📋 Full List of First Rides: bit.ly/C2WFirstRides
🪖 Ruroc Helmet: geni.us/krnbu
📱 Quad Lock Phone Mount (10% off): bit.ly/3GSxpae
🚫 Law Tigers: bit.ly/c2wlawtigers
🎵 Cardo Bluetooth (10% off!): cardosystems.rfrl.co/q9d12 (Code:C2WCardo)
🧥 Where I Get My Gear: imp.i104546.net/KeE4ze
🛍️ Full Gear List: bit.ly/C2Wgear
🗣️ Discord: / discord
📸 Instagram: bit.ly/C2Wpics
🎶 Music: share.epidemicsound.com/C2W
Note: Clicking the links supports the channel at no extra cost to you. Appreciate the love! Ride safe.
Chapters:
00:00 - Introduction
00:16 - A History Lesson
1:45 - Disclaimer
2:01 - Step 1 Wind Proof Helmet
2:52 - Step 2 Secure Camera Mount
3:49 - Step 3 Modify Interior of Helmet for Mic
4:31 - Step 4 Install Cardo
4:56 - Step 5 Installing Mic and which one to get
6:06 - Step 6 Routing the Mic
6:25 - Step 7 Recommended Cameras
8:00 - Moving on to PRO MODE
8:33 - Accessories for your Camera
10:09 - Audio Upgrades
12:06 - Secret Sauce
15:22 - Super Secret Sauce!!!!
16:51 - Outro Crew
@chaseontwowheels 4 ай бұрын
If you guys are looking to start motovlogging or make your current setup better I'm working on something BIG! Sign up here and I'll keep you in the loop when it's ready: bit.ly/c2wcomingsoon Here are all my dirty little secrets to getting some of the best video and audio while riding a motorcycle. Hope this helps you guys improve your vids! Everything you need Easy Set up - Electrical Tape for Vents - amzn.to/4chGCYw - JB Weld ClearWeld Quick Setting Epoxy for Camera Mount - amzn.to/49Qy7lQ - Cardo Bluetooth Communicator - cardosystems.rfrl.co/q9d12 - DJI Osmo Action 4 - bit.ly/C2WAction4 - Insta360 Ace Pro - www.insta360.com/sal/ace-pro?INRQR02 - Purple Panda Mic - amzn.to/4abyhUB - Osmo Action 4 Cage - amzn.to/4auEnQf Pro Set Up - Expensive Mic Chase uses: amzn.to/4adZ9n4 - Rode Wireless Pro - amzn.to/3Tz1L9h
@chiefyy710 4 ай бұрын
Huge huge props for recommending those two cameras and not the other one
@scottforti3194 4 ай бұрын
But the “other one” looks better than both in daytime lmfao
@RioRides 4 ай бұрын
Even normies know now that that other one overheats.
@adrianborinsky2989 4 ай бұрын
But useless when your files will always be corrupt or the camera stops due to overheating lo. I hate my hero 9 black @@scottforti3194
@RioRides 3 ай бұрын
@@YammiePro It is and I still own DJI stuff.
@stavrozinio 3 ай бұрын
@@RioRides I use mine on external battery, stays on whole day and I just press the REC. That way, no freezes, no overheats.
@mr_mel 4 ай бұрын
I was legit looking for motovlogging setups yesterday. & u drop this today. Looking forward to setting mine up one day
@chaseontwowheels 4 ай бұрын
If you were looking into motovlog setups you might be interested in our big project that we are currently working on. You can find more here: bit.ly/c2wcomingsoon
@darrylm79 4 ай бұрын
OC - Chase - You have been doing this for 13 years, and you're STILL trying to improve. You're still trying to make every video a little better than the last one. That's awesome. Thanks for always putting out the coolest content you can. It's been a fun ride watching your channel grow and you grow as a person as we all live vicariously through you.
@chaseontwowheels 4 ай бұрын
Thanks for that comment. I'm not one to just be content with what I got and always wanna do better so I plan on continuing to do so!
@rijden-nu 12 күн бұрын
@@chaseontwowheels OC? More like OG :)
@benmarcotte7013 4 ай бұрын
Hey man, been watching you for years! Just wanted to say how much I still love your videos!! I know the Moto-Vlog space is rough right now, but I’m still here for it!! I wold love a new series, I miss stuff like the adventure series the most. Not focused on the bikes themselves but the crazy shit you can get into on a motorcycle! Keep up the good work man!!
@GlennyRides 4 ай бұрын
Adventures is what its all about!
@chaseontwowheels 2 ай бұрын
Trust me dude I wanna get a T7 and go explore random stuff still. T7 = Bigger WR250x
@olmanzomby7718 4 ай бұрын
Sweetness! I just bought Osmo Action 4 for my vlog helmet and thanks to you, I have a better direction for even a better setup! Thanks, bro!
@RideWithDanger 4 ай бұрын
Awesome and informative bro! I think I learned something that I will be using in the future to improve my setup!
@RidingandWrenching 14 күн бұрын
Thanks for sharing! I will test your setup and hope to be able to make high quality riding videos too.
@Milsparro 4 ай бұрын
I've been running your setup from like 8 years ago, gotta watch this!
@thomasolson8417 4 ай бұрын
You just convinced me not to go into motovlogging. 😂
@ralliant5941 Ай бұрын
The title is enough to make me not watch him again I've paused it to comment 🤣🤣🤣🤣
@R1DEOUT 4 ай бұрын
I like the way you showed how to mount the transmitter to the back of the helmet, I was trying to figure out where to mount it or even put it in my pocket and fish it from there. But this right here helped out a ton. Appreciate this video. 👍🏾👍🏾👍🏾
@MsAnto20 4 ай бұрын
Thanks bro your info, make me still passion on motovlog although in low budget, best regards
@manybikes 4 ай бұрын
This is rad. The 2nd audio backup is epic. I've got so much footage with shot or missing audio that this would have saved. I've been using the Purple Panda for years... (4 of them since 2017) and Sony prior to that. Looks like I'll need to pick up some epoxy... that's my missing piece. Thanks Chase! 🎉 oh... I'm still using the original Osmo Action because it has been flawless for more than 5 years! Looking at the Ace Pro now...
@GlennyRides 4 ай бұрын
OC-Talk about giving it a 110%. This puts my setup to shame 🤣 Looks good buddy, stay safe out there and bring on 2024!!!
@ixmalice 4 ай бұрын
Thank you so much for the video man! I'm a huge fan of the informative videos and your knowledge is very valuable :)
@admireinspire 4 ай бұрын
I've had great success with the purple panda but I always thought there was something I was missing and that sennheiser mic seems like the ticket. I also like the functionality of that rode recorder if it auto balances around your volume because screaming can clip if you're already pushing to the edge of the recorder which I do with my tascam. Great video sir🫡
@mikenje5409 4 ай бұрын
Thanks so much for sharing all this info. Much Appreciate and great channel 👍
@BlueHippoMoto 4 ай бұрын
Always one giant step ahead on these camera / sound setups another excellent crash helmet set up video , Thank you 🙏
@edsky7 2 ай бұрын
OC thanks for the tip. I started last year making videos for fun and started with the GoPro 10 and DJI mic. And because of you I have modified my ruroc 2.0 and now the 4.0 with inspiration from you 😂 so keep op the good work.
@streetsandpeaks3013 Ай бұрын
Great video! Thank you! I’ve been making videos for years but switching from tuner cars to bikes is a game changer in the audio world. I am running the GoPro 12 Pro Black and the latest Rode Wireless Me (the one with a mic in the receiver and the transmitter). I have yet to make a published video with the new helmet set up but so far the auto gain and dual mic set up opens the door for clear audio and engine / exhaust noise on my Streetfighter V2. (*I actually fit the transmitter under my cheek pad in my Shoei and curious to see how it goes without a separate vlogging mic - my bike is loud AF!) Next goal has to be to clean up the look though… your helmet set up is definitely better than mine was, but mine will be clean and stealthy. Thanks for this! 🤘🏼
@advmike 4 ай бұрын
OC Love the detail, Chase. I've been using the DJI Osmo Acion 4 with the DJI Mic 2 to eliminate wires. Still dialing in my setup but I think I might be able to get away without a lav by just attaching the mic pack in the front of the Bell MX-9 helmet.
@Blottski 4 ай бұрын
Really love getting some insider tips on this stuff. My only issue with your particular setup is you don’t quite get enough of that sweet sweet moto sound from the exhaust/engine. Edit on further review I see you are addressing this with the “pro” setup. Haha hell yeah Chase.
@DeepSouthMoto 4 ай бұрын
Good video. Thanks for sharing the tips.
@markmoss5565 Ай бұрын
Nice setup I'll be giving it a go
@paulie550 4 ай бұрын
Great video! Thanks for sharing your tips and tricks.
@rodrigo2w 4 ай бұрын
I am glad to say that I based my channel name on chase's channel name! Just because I love to live on two wheels and also love and learn a lot watching his videos, good fan. About the go pro camera position, my favourite and the best way in my opinion is by fitting it upside down on the helmet front chin so I have better angle ajustment options to great video takes with wide view to the audience! God bless you all.
@Sree.Vikash Ай бұрын
- First setup can be lot clearner with a short type c mic - Osmo 4 action can connect directly in camera to dji wireless mic, don t need a wireless receiver for that
@MITZMOTOMNL 4 ай бұрын
Great video! I like the CFMOTO shirt, so cool! That XO Papio is awesome. be safe, ride safe..
@shihabahmed7084 4 ай бұрын
I'm defo going to be looking to try this set up
@ElProfeMoto 4 ай бұрын
Chase, try the DJI mic2, it doesn’t requiere the receiver, just the transmitter.
@jamesmaclennan5276 4 ай бұрын
This is what I use! I glued the magnet to the bottom of the cheek pad and have the mic 2 transmitter on the outside of the helmet. I then use a wired mic that runs inside the helmet. I swap my Osmo action between chin, mounted and handlebar, mounted and always have direct audio.
@ElProfeMoto 4 ай бұрын
@@jamesmaclennan5276 can you show me what you did?
@worldrider 4 ай бұрын
Yeah, that's what I'm using and have a detailed vid showing how I do it wirelessly. There's a link in my other comment above!
@TwoTubesADV 4 ай бұрын
Nice set up, trying something along the same lines myself.
@Rhoenschrat 4 ай бұрын
On the Ace Pro you can also adjust the mic level. It's in the settings menu under general and then external microphone.
@spitescorner 2 ай бұрын
That pro set up is sweet. Extree but sweet. I love the idea of wireless audio into the detachable camera. Might have to do some thieving😉
@chaseontwowheels 2 ай бұрын
Im working on a wireless version of this video coming next!
@MotoIB 4 ай бұрын
OC: great helmet and the setup. I was thinking of doing the same but with the DJI Mic 2 with the DJI action 4. The new mic can Bluetooth to the camera and it has 32bit flot. Can't wait see how the audio will come out with the two mics.
@eddietoft3747 4 ай бұрын
Fantastic video Chase ! 👍👍👍, Very informative, and I will be guided by your recommendations ! 😁😁
@JayJankulovski 4 ай бұрын
Sick video man! There were some tips in here that I haven't ever thought of that are SICK! Also you can set the output gain on the Ace Pro :) I have mine set to -12db
@YogaSido 4 ай бұрын
Thankyou! I'll install my mic like what you did in this video. It s suck for me who motovlog touring around city without any sound that out from my mouth.
@KiwiMoto72 3 ай бұрын
thx- i did your. exact setup but standard helmets won’t allow the visor up and down too well with this setup, so i’m looking at the helmet you have here. I also find the cardo mic setup to be so good now, that it’s worth running a separate recorder for engine noise then adding them together in the edit process btw
@SundayServiceTDS 2 ай бұрын
Great set up make alot of sense.
@steev182 2 ай бұрын
I remember some of your early videos where the mic messed up (especially back with that horrible GoPro USB-C - 3.5mm adapter). I think I recommended getting a zoom audio recorder to handle the audio - which would've been a pain to sync back in post. So the back up recordings straight on the Rode is great, and even while you were talking about installing the transmitter I was going "YOU CAN PUT THE OTHER ONE ON THE BIKE ITSELF TOO AND HAVE AMAZING AUDIO!"
@JohnWi11is 4 ай бұрын
So the Rodemic mounted externally to the back of the helmet records your voice perfectly without wind noise or anything?? Amazing video BTW loved it!
@gunnarwendt775 4 ай бұрын
Thanks a lot for this super helpful informations. I really appreciate your work 👍
@long_vacation_tour 4 ай бұрын
Thank you for these instructions 🤘
@DynoFusion 4 ай бұрын
All that on a ruroc
@duff8402 4 ай бұрын
Absolutely not a big deal with this lightweight stuff like this, but if the epoxy ever does become an issue for you, it's because you're mixing it on cardboard. The cardboard can absorb some of the properties of the epoxy and make it less of a pure mixture. Again, I doubt you'll ever have issues but something to think about if you ever use epoxy for something heavier. Unrelated to this video, but that's why some folks have trouble with body filler on car bodywork. Enjoyed the video man!
@SLO-Ride 4 ай бұрын
I use a replacement, 6" gaming mic. It's perfectly long enough to come from the camera (GoPro), and under the chin guard. I poke four tiny holes in the wind block hard piece that is at the inside front of the chin guard. These let me use two tiny zip ties to secure the mic centered on my mouth, and slightly below my lips. With a foam cover, the mic pics up just a little wind noise, and the "P-P-P" while talking. With a cat butt, there is no extra noise, but it tickles my nose :) I have no extra wire, and no need to wrap wire around and around the camera mount, leaving me a clean set-up. I also use the Chin Mount brand of camera base, as it has a larger "foot" that conforms and adheres to the helmet.
@unit03 4 ай бұрын
perfect time for riding season! thanks!
@Methendis 4 ай бұрын
OC sick to see this setup, hope to get the chance to do this one day
@Photogromer 4 ай бұрын
Nice. I’d get a black 3.5mm for the wireless mic receiver to the osmo action 4 and maybe a right angle mic adapter for the wired version to keep the wire from sticking out so much, besides that some cool new options shown here. Thanks
@chaseontwowheels 4 ай бұрын
Yea I agree with that. I will say Im kinda loving the yellow because I never loose it. haha
@motoguy1 Ай бұрын
Why is the 3.5mm required from the wireless receiver to the Action 4? Doesnt the receiver have a USB C output as well? I'm buying gear now, and it seems avoiding the adapter will save $50 if using the Rode Pro system.
@teapotone 4 ай бұрын
Hi Chase, just for your info, you can (and have to) adjust the mic gain in the insta360 Ace Pro. Stock it's quite hot, at least for me, so I reduce the gain by -12db in the camera👍
@skylargreyjuly 4 ай бұрын
very cool setup, i use Cardo with Ace Pro as my go-to setup, cheaper and easier
@rostfomin 2 ай бұрын
This is a great setup! Thanks for mentioning the rode system, I'm already considering it. What about riding in the rain though? Adding the mic adapter removes the waterproofing of the camera and I'm not sure the rode mic is waterproof either
@ktg612 4 ай бұрын
Closing that front vent was a game changer for me.
@TiroxSnapJack 4 ай бұрын
totally agree
@btgmoto 4 ай бұрын
A two mic wireless setup is how I've been doing my best sounding videos. Every bike is different though, so I've had some hits and some misses. Sometimes it's airbox induction that sounds best, others it's the exhaust. I use the DJI Mic setup tho. Good video though, I watched the whole thing.
@ReezMotovlog 4 ай бұрын
You can set the db for external mics with the ace pro. Its in the settings. Mine is set to -12db and works great
@dane4890 Ай бұрын
I love this video, thank you ;)
@ROOSTER_22 4 ай бұрын
YES, CHASE, BUT IF YOU GET DJI MIC 2 IT'S CONNECT VIA BLUETOOTH ON THE CAMERA AND TUCK INSIDE THE HELMET AND USE YOUR MIC PLUS THE CAMERA I'LL BE WATERPROOF + RECORDS TOO AND IS THE SAME QUALITY AS RODE MIC
@S2keyz 4 ай бұрын
Yes but the quality on the wireless is muuuuuuch better
@BikerKev 3 ай бұрын
Thanks for the recommendations I’ve just ordered myself the purple panda mic from Amazon hopefully it’s as good as you say
@Smallbore2wheels 4 ай бұрын
OC: I would love to see a secondary rider use the second transmitter to see how it would hold hold up with traffic. In the end the audio would still work since even if the wireless part fails, it would be recording on board.
@PokerMuppet 4 ай бұрын
Very good video... I'd add that if it was me, I would add a 90 degree 3.5mm adapter to the mic connection so it pointed down rather than out to the side. It would make for a much neater connection, keeping the cable closer to the device rather than looping out like that in the first set up.
@rridersgarage 4 ай бұрын
Thank you the killer audio set up! 🙌 do you record conversations on your Cardo when riding with others? I’m thinking of getting that conversation recorded other than the app recording and post sync.
@GIZZMOTORSPORTS 11 күн бұрын
Trust me on this…. If just recording your own voice and bike and not trying to record all headset audio and your riding buds, all you need is one mic placed inside the helmet. Don’t bother with a mic by the exhaust, you’ll have to edit the volume way down.
@beebee-up6ps 3 ай бұрын
Dang someone finally using the rode dual for exhaust and mic, same here :)
@JCUTMoto 4 ай бұрын
Ace pro also have a gain adjustment
@PMKSWORLD 4 ай бұрын
Great video bro 👆 I like how you blocked the vents with the tape, which I'm going to do to my ruroc helmet now. great tip!
@alotl1kevegas860 4 ай бұрын
Wow, I didn't know about the gain feature on the action 4. I may have to switch teams and get one.
@SportbikeManiac 4 ай бұрын
OC-Thank you! Please do camera settings video!
@JoeL-td9bx 4 ай бұрын
Nice vid thank you. Better microphone options include the Cardo with Ace Pro, which is cheaper and more accessible for those who already have a Cardo.
@chiefyy710 4 ай бұрын
If you want bike audio this won’t work… I use this and it works fine unless I want bike audio or to listen to music
@FuelledByMuffins 3 ай бұрын
Liked and subscribed. Is there a way to record good engine sounds too whilst talking inside the helmet?
@TwoWheelTrigger 4 ай бұрын
Good video. I get a lot of compliments on my audio but I’m doing mine slightly different. I’ll check out the rode audio wireless pack.
@Atopper 4 ай бұрын
OC. For the exhaust lav mic, use one with a 130spl level or better. The Sennheiser lav's that we both use have been the best I found. I personally run the Dji Action 4 with the Dji Mic 2 that wirelessly connect but always overlay the 32bit recording (I have a video showing why for those mics). The two biggest reasons I chose the Dji mics over the Rode mics are, 1) the Action4 is weather sealed. 2) I can detach the camera while riding (not recommended) for hand held shots or to switch between my helmet & handlebar mounts. Thank you for helping the motovlog community!
@chaseontwowheels 4 ай бұрын
Definitely a good option but the DJI Mic 2 doesn't have a screw in type cable for my lapel that I use so I went with the Rodes because of that.
@Atopper 4 ай бұрын
That is true & a bummer on Dji’s part. I haven’t had any issues using the locking Sennheiser mic with the non locking Dji mic but I do loop the cable around & underneath the clip for extra security.
@damfino 4 ай бұрын
You can get the same locking effect on the DJI Mic 2 by running the cable under the clamp. There is even a groove for the wire. Also no need for the cage and audio adapter. The Mic 2 will connect to the Osmo Action 4 wirelessly.
@Atopper 4 ай бұрын
Correct! The Dji Action 4 & Mic2 is by far the best wireless motovlog setup in my opinion.
@Jmbo65 4 ай бұрын
Like a lot in this group I have just set up the DJI Action 4 with Mic2 no wires bit of metal plate works a treat still get some wind noise around 70mph but I think that’s the Ruroc 4 which is causing it😎😎
@kuyatwinsir 3 ай бұрын
I like your style of helmet setup... Additional subscribers here from Philippines...i wish to have 1 also from you sir...
@TiroxSnapJack 4 ай бұрын
OC - Perfect timing Chase. I am just about to install my set up for my 1st ever . fyi...have not been getting any of your videos recommended or presented to me by youtube.
@chaseontwowheels 2 ай бұрын
This is why we have an email list now because we can't trust YT. Good luck on that setup!!
@zqs1850 4 ай бұрын
Thanks for sharing 🙂.. I can't help but wonder - won't your helmet feel very heavy after mounting and adding all those stuff..? 😯
@br540i6 4 ай бұрын
Great content, Very much appreciated. Thank You.
@HarschTier2 4 ай бұрын
That's such a pro set up! I currently use a chin mount that I can strap in and out, so not as high level as the DIY one you made. Might try with my old Shoei someday. By the way, you mentioned the Ace Pro lack of mic level, but in my camera I can actually set the dB level without problem. I have the latest firmara though. And I also own the DJI action 4 but I had several audio issues in the past with microphones and I just don't trust it anymore. Good camera for the large FOV but not as reliable and all-rounder as the Insta360.
@hayleycomet8029 3 ай бұрын
Thanks for sharing!
@KiwiMoto72 4 ай бұрын
super, super helpful Mte - grazie!
@farhanadithya5235 4 ай бұрын
Nice setup man! Thank you for sharing. But little bit curios, can you capture sound from your Cardo to get the sound of communication through Cardo with your group? I guess that would be nice to add.
@Trond_Karlsen 4 ай бұрын
Great video and information. Quick question, how much of this is waterproof?
@frankmoralesiii6908 4 ай бұрын
I've been Motovlogging since 2018 - nothing fancy. I've been using GoPros but they are very finicky. I was out riding today with four Gopros on my bike and they kept turning off. And one of my GoPro hero eights is now cycling on and off constantly So I'm looking at maybe getting some of those DJI action cameras . Thanks for giving me some great ideas with this video
@ArenaMobil 21 күн бұрын
My DJI Action Cam 4 uses a case from Talesin, does using a mic adapter require removing the Talesin case???
@underthedrone2735 4 ай бұрын
You can simplify this even more with the DJI Mic 2 and Action 4 using bluetooth pairing. No wires. Glue some rare earth magnets in the chin piece of the helmet to attach the Mic 2. Done. You might even be able to use the Insta360 X3 and Ace Pro the same way.
@dxhamshack7905 4 ай бұрын
Great video of your setup. Dont you get problems with fogging after taping up those vents? Liked and subscribed.
@UnstableAdrianHD 4 ай бұрын
ive been around this channel for 13 years :)
@ViciousXUSMC 17 күн бұрын
I am not a moto vlogger but I just got a new helmet so maybe I will convert my old one into a dedicated recording setup. I have the Rode Pro already, Sen microphone already, my action cam broke but I like using a 360 cam anyways. I usually dont mess with connecting the reciever just record to the transmitter and sync in post, but if your starting/stopping a lot of clips I can see having the audio feed could help with that. I like your audio mix idea, I use that when I record events I'll mic a room, and the talent so I can mix in post. The most crazy setup would be if I could actually find a way to record with my Rode NT-SF1 its a Ambisonic microphone so I can record a 360 video and actually bind the audio to full 360 so the sound moves with you as you look around, up down left and right full 360 audio. But that microphone is extremly wind noise sensitive. Could still rig up Binaural micrphones with a backpack though. So have Voice be mono and Ambient be Binaural would give a good effect of "being there" like in your helmet.
@FahadHasanRouSSeau 4 ай бұрын
Thanks for the information's sir .
@ioandragulescu6063 4 ай бұрын
@3:32 I guess priorities differ. As a casual rider who occasionally films rides I went for a super cheap tent guyline tether that I loop around the helmet strap.
@rahimresad7045 4 ай бұрын
Awesome tutorial!
@FaysalMotovlogs 4 ай бұрын
Good work, Motovlogging is tuff task and setting up helmet for good voice recording and Audio is needs different Rnds to conclude better
@FirstnameLastName-sx8ls 3 ай бұрын
OC. Nice setup. Do you use the cardo as an intercom or for phone? If so how do you set that up? Does your mic pickup the music you're listening to?
@gassemo239 2 ай бұрын
So the wireless mic is what you need when using a modular helmet ?
@r3dknight932 2 ай бұрын
So two mics one for cardo and one for cam? That's what I was confused about... Thanks for clearing it out
@yveslaurier950 4 ай бұрын
The AcePro can adjust the recording level. Go to "Settings", "General", "External Mic Gain", then you can go from -18 db to + 6 db.
@theinfinitryda 4 ай бұрын
OC. nice vid homie
@BakaMoto 2 ай бұрын
epoxy works great! Thanks man!
@tertzmotovlog 4 ай бұрын
Great content, where can we get the jack mic adapter for the action 4 i havent seen that before thanks man
@FitBones 4 ай бұрын
I have been looking at a similar set up as I have the Rode wireless go 11 but was not sure on this set up how you get your voice recording during a trip. The Rode wireless receiver on the front picks up audio from the transmitter at the back of your helmet, so road, exhaust audio, how do you connect your voice audio into the system? Or do you
@hagnbike 4 ай бұрын
Have you tried the instamic bluetooth microphone? I haven't used it much yet, but after a few first tests, it works exceptionally well and saves you all the wires. It connects via bluetooth to the camera (it mimics being AirPods). It works quite fine with my Insta360 ONE RS. (However, it refuses to pair with the ONE X2, but there are reports that it works with the X3)