Gift with taste this holiday season with air up! Visit air-up.com ( airup.link/PresidentChay-Nov ) from November 20th - 27th to shop their biggest sale ever and save up to 40% on all orders! #airup #airuppartner

FYI, Pexmore, the brand of the motor they bought, makes a $500 e-bike on Amazon. They even make a 1500W bike for $620.

You guys are so creative. I love watching you building things.

Great to see you are doing so well. I have been a subscriber since your second video, and i always knew you would become successful. You absolutely deserve it, you have been so dedicated to the channel, and have a great attitude. Keep up the good work!! Some of the older videos seem to have been deleted, but the new ones are even better!!

One thing I'd recommend on that is to put at least one torque arm on the front fork. That fork's kind of weak for that power of motor and that axle is likely to spin out of the dropouts. Also that fork wasn't designed to have a disk brake caliper attached to it so there's a good possibility that repeated use of the front brake will eventually bend or break the fork. There's at least 20+ e-bikes that can compete against the Hyper Scrambler.

you guys are littterly the best thing that has ever happenned to me

I like how they make their builds look so easy to put together.

This man is one of the most underrated youtubers on here. He does insane builds, has fun doing it, and in the past has done crazy challenges. I hope he hits 1,000,000 soon.

Dude you are just the best

And, it gifts a lot of fun to build your own e bike and the battery is the most expensive part. Great that you showed us how to build easy yopur own fast e bike, ore, you can buy a 250watt motor for legal use (in the Netherlands ) Okay, the Scrambler has a wider range but that bike used 2 batteries. Keep building

I forgot I was subscribed to President Chay. Love the videos dude. Keep up the good work

This guy is the goat of building

I just scored a freebie Marin east peak FRS full suspension mountain bike with a really rusty chain, flat tires and bent drop off (derailluer), but Marin bikes have a special feature to protect the frame from bending when you wack the drop off-a kind of breakaway part or something. . . might just need to tighten a bolt. It's Ninties bike which seems like it has low miles. Unfortunately this model year does not have disc brakes. I am going to be watching a lot of these build videos, meanwhile I am going to buy a new chain, clean it up and ride it as a regular bike for a while. ***you need to primer metal with special bare metal primer before painting.

Your creations are awesom

president chay's world and we just livin innit

you guys have so much blue paint from the bus xDD i love it well done

Love the vids man

Good Job Boys..Greetings from Brazil

FINALLY AFTER A LONG TIME DOESN'T POST ARE VIDEO

You are the KZfaqr who deserves 1M+ subs

Please try to upload these amazing vid consistently

there is many bikes that can compete against the other bikes, companies include, but not limited to, talaria,surron,onyx,superibkes AND MUCH MORE

Really enjoyed the video but I wish it was longer

This man and his dedication to pump out quality videos deserves a million subs let’s get him there ❤

Very KOOL 😎Thank You for Sharing

good work especially your brother helping you out. now we have to wait another two months for a video to come out?

I am so happy that this guy uploaded I thought that he left youtube

i think it would be a really cool idea if you could find a way to turn the energy of the pedaling into energy for the battery

We need more videos more often

Great job! i'm trying to make one as well just be careful with the front suspension because I used one exactly like that bike that u used and it basically fell apart as i was bombing it down a hill at full throttle (the one u used looked like it was designed for a kid / tennager) if that breaks just upgrade to a hardtail designed for adults. 😁

Every time I get a notification you dropped a video, I put it on my next to watch list if I’m at work or unavailable to watch it! Keep up the amazing work would love to work with ya one day my dude.👏🏻

I love this video! I just have one question how do you charge the battery?

3:29 the moment I subscribed. Arizona is my home as well.

20 bucks for that bike 😱 gotta love goodwill man

Another ba ba ba BANGER

You should have told people if they install front motor you need to have steel forks and torque arms otherwise the forks will snap and throw you off as it happened to me at 30mph luckily i was ok not hurt anything but learnt my lesson quickly was my 1st ebike but now i ALWAYS use back motor stay safe guys 👍👍

I definitely want to try something like this cause I'm just so against the idea of owning a car. Having to pay for parking, gas, expensive maintenance and then on top of that, registration and insurance. And if it is a custom made ebike, it won't look as sleek and probably will be less likely to get stolen if left out, so I see that as a plus rather than a negative. Being able to go 30mpg for 30~ miles is incredible for the cost. I just wonder how the battery depreciation would be after hundreds or thousands of miles

Thank you for including kilometre units

he is finally back

Love the videos!

I can't stop watching these videos because they're so entertaining, including this one! You did a phenomenal job making that electric bike for $500!

Bro that’s amazing just bought

TY FOR UPLOADING BRO!! I LOVE U!!

You guys are so awesome thanks for sharing enjoy and be safely biking 🚲

If Chay actually sold this bike i would buy in a heartbeat

At 3:24 that spin was clean

2:00 OH MY GOD THAT WAS SUCH A BAD IDEA, OH IM KISSING MY FINGERS RN

looks great

The HS2 motor is only 1000w with 1800peak probably. I have the Hyperscorpion since 2020. Very similar in power but I recently ordered a Ristretto 512 A20, paid $2800 but it going for $3,395.75 with a 15% discount code. It goes 40mph. Mid-drive motor peaks at 4500w peak with 250N.m of torque. I've test ridden it once at their HQ in Austin, TX and recently at Electrify Expo in Austin the bike is a beast. I can't wait for them to start shipping which should be in end of December/early January.

Everytime you upload a vid my day get better, Keep it up chay🗿

Your videos light up my day😊

Why did you fully rivet the battery compartment? How will you access the battery when you need to do maintenance?

This is a cool build.

This entire channel is the definition of quality of quantity

Who else was waiting for president chay to upload? 👇

your my favourite youtuber

Nice video im gona built one myself

i thought it was gonna be some bad "ebike" like in other videos but it works really nice

air up being sponsored on every video i watch 😭😭

The bar you cut off for the battery said power right on it!!! It was meant to be!!!

I need to get an e-bike man!

You should upload more often

You should build a luxury treehouse for less than a thousand dollar but make it a different color not blue and try to make it tiny

I built a squad of ebikes (5) last year from trash picks, thrift stores and a 20yo mountain bike. For the price of one off the shelf we have one for each family member.

This is crazy you are my favourite inventer on KZfaq❤❤❤

AWESOME!!!

AMAZING VIDEO, but can you do one for a scooter, as i think would be awsome as electric scooter are normally $300+, so i want to see if you can do it under that amaount of price

with airup does the scent get mixed into the water or do you just smell the scent and it flavors the water? because im with cirkul and it flavors the water by mixing in flavor juice with the water when you drink it.

i just realised that u guys made a fwd e-bike

Good job. However quick question do you think you could try to make one that costs less and doesn’t need and welding or anything. Please. Also keep up the great work

Hey, i know theres a low chance of you replying but i would love to know if the Air Up bottles are insulated and keeps ur water cold ?

heh, in the start i saw chay with a air up bottle.

Y'ALL DESERVE MORE VIEWS, YOU'RE BOTH VERY TALENTED

I'm a little disappointed that you made it FWD, but it looks super dope nonetheless. Great job!

So if you did this again with a carbon fiber frame from a road bike would you get up to 50mph? 🤔 I wonder if it would even be sturdy enough to support the added weight of the batteries. Especially if someone lighter, aka shorter, was riding the bike, you’d think you could get a higher top speed out of it. At what speed do we need to start classifying these things as mopeds or some new classification and require helmets and licenses-especially if anyone can just create this at home? So many questions this video has opened up.

omfg that is the same bike from berm peak I thought it was rare.

Hes back

I just stumbled across you guys. Watched your micro camper video. I like your videos a lot, nothing cringe, no typical KZfaqr nonsense. Great videos, definitely subscribed.

This is so inspiring I'm making one myself. I was hooked watching the video and after I looked at the views and was shocked to see this only at 35k!

Day 1 of asking President chay to do another 5 day homeless series again

Nice build! Why not use spray paint though? Seems much easier.

I love your job!! This is sick! You're very creative! I can't imagine riding on it....

Im not a bike expert, but that bar you removed seems like it was probably important.

Swytchbike sells a really simple e-bike conversion kit

Great plug without stopping the video , I'm going to give this flavored water thing a try 💯

Never gonna stop watching these amazing videos

looks fun 😂

really nice work, I would like to know the 3D software you use?

The way the bike was painted and modded for the battery is impressive. I have always thought that bikes with this geometry weren't the best for conversions. Not sure if what you guys did with the brakes were safe or not. I would use adapters instead of modding the frame and fork for disc brakes. Also like another comment said, torque arms are a must for direct drive hub motors. I have a video too on how to convert a cheap new bike to an Ebike. m.kzfaq.info/get/bejne/lZ-AZc1ml7bNiY0.html

so good

And you didn't put a torque arm on the front forks. It wasn't exactly safe before you modded it, and now it has two guaranteed points of failure. The forks are going to get bent by the force of the motor, and the frame will be prone to collapsing in on itself without the top tube. The added weight isn't going to help either of those issues. But it did make a neat video.

Long time no see

You should try to make a f250 off a golf cart chassis

Now you a high value man .... value in your craftsmanship and innovative ability respect

Amazing

Now I just gotta get a grinder and a rivet gun

I see you guy are sticking with the blue paint. Love the color, and the video. Good job!

what if you add something, that charges the battery with the rotation of the front wheel

One thing im having trouble understanding is why link a Caomm battery, use a Unit Pack Power battery and say you used this QWW battery?

you could easily double the battery size and still come in at under 1k.