I just swapped this ebay harness onto my kswap integra an it would no longer start. Watched your video and decided to give it a try without ohming anything out, swapped the wires now car starts again! thank you for the information

Sorry to here about your friend Carlos, I didn’t know him but I remember way back when he first started I found his company and product on instagram yeaaaars ago. Again I’m sorry for his loss and may he rest in peace.

Ordered a $85 eBay B series harness for my 89 Si build🤷🏼‍♂️ she started up no issues no CEL, and drives fine 💪🏻💯

I’ve been trying to start my Krx for over a year because of this thank you for the knowledge 🤝

I got one of those impossibly cheap harnesses and spent an hour testing it and seemed ok. I plan to reloom some of it for my setup anyway. But even if you needed to repin it, as long as the wires go to the right plug you are good to go.

Thanks for always being an inspiration Dana!

For $70 they must be using slave labor lol. Or at least making them hundreds at a time assembly line style. So much highly skilled work goes into making a harness. RIP to the homie! You've been using his harnesses for as long as I've been watching your channel. Can't believe it😢

The grind definitely never stops.

Can’t believe Carlos is gone😔 his work was top notch 💪🏼

This made me want to fix up my EJ.. still need them fork spacers 😂

Everybody that watches Danas video should at least tell like five friends about Dana's channel on KZfaq............, to me his content is filled with valuable information about imports, and a lot of valuable problem-solving,with Hondas,160,000, is way too low for content this good........., so let's everybody helped Dana out with his channel and everybody at least tell five of their friends, thank you............

Thats exactly what happened with my harness when I got it. I dug around when I installed it and theres some forum post out there that shows this fix too

Running same harness over a year now works fine.

really good idea to test the pin outs to the plugs for sure ill look into doing with a ebay harness foy my dseries

Love your content man keep up the good work

Excellent work thank you for all your input. 🏎️civic🇵🇷

Curious if this works, cuz I'm using a CJs conversation harness with the same eBay harness. RIP Carlos, that is sad. He makes a great product and was very helpful.

Nice. Sold the smurf. Good job bro.

Thank you Sir👍

Thanks!

I have the Jack Spania in my k20a em1 with kprov4 prb, runs perfectly. I had to repin a few connectors like the front facing vss but that’s was it. Using the ktuned conversion harness and I have full dash working and no cels. Speedo is dead on too using the kpro to adjust. I also run my afr from an aem 30-0300 wired into analog1 on the kpro. Just make the correct adjustments in k manager.

how's the quality of the plastic used for the connectors, are they gonna last 10 years or they will break appart in a couple years ?

I ordered a jackspania harness recently and I couldn’t get spark for nothing. Went ahead and bought the charge harness for my rsx engine harness and it fired right up

rest easy cj. we love you.

ahhh we were trying to help a friend who ran one of these and we could not figure out why it didn't start, I would have never checked that also

very very helpful video thanks man..

Holy crap. Good video and info.

Shout out from PH 🇵🇭 Dana!

Wish there was more detail on the ebay harness. I.E how u ran the harness n your struggles.

Great video, I want the link to that multimeter.

Great Work

Is there no way to upgrade the shifter without losing the stock look, imo the stock shift boot and console look better than the big racing look

The amount of knowledge this man possesses… I’m jealous lol

I have used them several times and works great for me I got a k24a turbo

Can u show the b series tps n map wiring n diagram? Pretty please...with sugar on top....

Next thing on my list for my da for tuck harness

The best thing about those things is someone else did the job already therfore that labor time is saved if you think about it..if it has punch work oh well flip the wires to make it the final product

It's tragic to hear about Carlos. I was a fan of his work. I had yet to see about his passing. He was a big part of the "EF" community. I had a question for you. I have a 91 Wagon. I am about to do a Y8 swap and want to tuck the bay some. Do you have any videos about moving the proportioning valve to its location show in the end of your video? I have a K20A2 that I want to swap into it long term.

Need a steering knuckle for 9th gen civic. Does your salvage yard have any there's nothing where I'm at.

Bro bro🙌👏🙌🤝🙏clear as water..my car turns on now

Great build man! Binged the Blueberry build series for a while. I found your channel because I was trying to find out if my new turbo setup was working fine or not. I ended up with a GT3582 from Maxpeedingrods because I'm a pobre $😢😅, anywho I just finished installing it on my Toyota Chaser. It's twice the size as the stock turbo so I know I should expect lag but I was wondering what yours was spooling at, mine spools at 4K RPM and it's insane after that but I was hoping to get spool at 3K RPM or 3500 at most. Does that sound about right to you? I know a 1jz and K24 ain't the same but I was just curious what yours was spooling at. I'm working on my videos right now so hopefully I get at least a part one out soon. Anywho, love your content, cheers bro 🤙🏽.

R.I.P. CJ

So the k swap conversion harness isn’t same as one in video ? Confused new to this

Damn. RIP Chris

Ever try Jack Spania racing? So far everything I've had from them has been good.

So I bought a similar harness and I'm having issues figuring out the 2 VTEC connectors. I'm missing the one that's towards the rear of the solenoid. Any suggestions? Maybe a different harness but they all look to have the same connectors?

I used that one on my k24 del sol

🔥. Nice

Keep it going

K24a in a eg with this China made harness . I have a k20 crank sensor on the k24 but I got three crank sensor codes . Do I still need to swap wires even though I have a k20 crank sensor ?

Could I use that cheap harness, an immobilizer bypass and compatible ecu to run this engine on a stand?

Even I knew he was turning the wrong way 😂

Why did you those 2 b series sensors

Let's goo!!!

Noooo not CJ 😢 dam im at disbleif my he rest in peace ❤

Long live CJ 🙏🏽🩶

I tried the eBay wire harness With hybrid, racing, chassis harness I switch the radiator wire, just like you did, but I was still having issues when I tried to plug in the factory wideband, as long as it was unplug, the car seem somewhat normal but with it plugged up my idle start going crazy. I plugged up aftermarket wideband to battery Everything was good as soon as I tried to wire LC2 wideband in to Harness into auxiliary 1. The wideband LC 2 no longer works. Not saying there was some mistakes made if you want to get an ideal just let me know zoom call you.

You should sign every car you build !!!

Rip cjs. 🙏🇳🇱

Will harness work work with k20z3? For eg

Can you post the link to that engine harness 😢 Static plz.

Damnnnn, RyWire is a name I haven't heard for a very very long time!

Send link to harness you bought bro would appreciate it

RIP CJ didn’t know he passed.

So you don’t have Project blueberry anymore dang

Yo you want to buy a sleeved boosted 92 prelude?

Could you please link the harness !!!

All those cheap engine harnesses always make me ask, "Does it work? Yeah? But for how long?" I've always been scared they'll stop working after a few months

I've been super curious about these Ebay harnesses. I was considering one for my GSR since they are like 1/4 the price of other ones. Ty for the video

🎉

Rip cjs wiring🙏🏼🕊️

Ghost in the background😮

Kinda sad to see Blue Berry gone

I need a harness for my 98 civic ex to swap a B18b1. Always wen I search I only get results for OBD2 to OBD1 or OBD1 to OBD2 but not OBD 2 to OBD2. I want to keep this car good for CARB referee. any part numbers for D TO B OBD2 TO OBD2 harness? Thanks

Link on the harness?

Rip CJ........ and so long Blueberry😢

ebay link please

Rip😢❤

Whats the paint code on the sedan? B37M? Florence blue metallic? Or different? I gotta sedan in that color that needs painted but i dont see them in the darker blue much

Interesting 🤨

cut awaaaaaaay from yourself, not towards yourself 😎

Damnit man, I didn’t know CJ died.

I have a brand new Cj wiring K conversion for the ef. Lmk mane

Still waiting for a k swapped 2003 sentra

I dream of wires (1981)

Can you post the link ?

Bone Thugz N Harmony🎉🎉🎉

Bye Bye Blueberry!😢

Honestly its luck of the DRAW on those CHEAP eBay china harnesses. Bought one months ago and compared it with my friend's known working harness on the ECU plug/pin side and WASN'T even CLOSE! Tried it ANYWAY and couldn't get it to RUN!!! Im NOT rich so went with a Jackspania Racing harness because MANY KZfaqr Honda guys had EXCELLENT success OUT of the BOX with those harnesses. Cant afford REWIRE or Ktuned. SO........

When I do work like this it never runs again🤦

Cut away from yourself not towards yourself 😮

Omg he died!?

Bought the jack spania b series tucked harness had all kinds of problems with it alternator rpms etc. On top of that they wouldn't respond or return it so avoid this harness if you can and the problem with jack spania not taking care of their customers bad business big facts

😜👍🇦🇺

May CJ rest in peace 🥹 such a warrior 🫡 and a good person whom should’ve had a longer life 🥹

Just not worth frying your ecu on that Egay harness. Had many swaps come over with them and never work. Either have to re pin or just buy an oem harness

I'm using the same harness on a Da lsv I hope everything goes ok 👍 thanks for that inf also I change words with you on IG about the bull boost head 🔩 and I'm gonna sent it but I can find the torque specs do I used oem specs or arp ?

Is it just me or is their allot of young people dying lately. RIP Carlos.

Goodbye blueberry 🫐 ! It was cool while you were around !

I bought cheap one like that and I don't get any power to the ECU, can it be that the issue with the harness