Cheapest, Easiest, & Best DIY Acoustic Panels

Рет қаралды 30,010

Күн бұрын

I explain the different ways you can make your own acoustic sound panels. After doing it myself many different ways I believe the best way to do it, is a way many people do not know about. Below are links to the things I use and reference throughout the video.
3M 77 Adhesive Glue: amzn.to/3mvBE1F
Hooks used on ceilings: amzn.to/3zApvQK
Strings used to connect hooks to rings: amzn.to/3xinI05
Ceiling yellow screw in anchor for hanging from ceiling:
www.acoustimac.com/acoustic-i...
Impaler clips used to mount on wall:
www.buyinsulationproductstore...
The 4 best websites I found for buying the insulation:
buyinsulationproductstore.com
acoustimac.com
gikacoustics.com
atsacoustics.com
Large NRC rating charts:
www.bobgolds.com/AbsorptionCo...
0:00 - Quick Summary
2:27 - Quality
4:18 - Price
6:22 - The work involved
7:59 - Frame or no Frame?
8:44 - Where to buy the fiberglass boards
9:08 - Best type & size to get
12:11 - What fabric to put on the back?
13:48 - What fabric for front and sides?
15:10 - Fabric: Where to get it, quantity needed, and price
16:40 - Custom print fabrics
18:09 - How to make the corners
19:21 - B4 & after sound demonstration

Пікірлер: 84

@sevegarza Ай бұрын

This is the only DIY acoustic panels that I would actually consider making. Like idk why so many other KZfaqrs are like "Hey you can do this yourself!" but then go to their professionally equipped workshop and wip out their table saws, staple guns, and work benches. Like bro I don't have any of that and never will.

@raybp7512 22 күн бұрын

🤣 i thought the exact same thing. Like bro I dont have a Pro Angle-grinder

@hf3.0 4 ай бұрын

I’ve watched dozens of videos on this exact topic, and always wondered why no one was trying to cover the rigid fibreglass without a frame. You get my subscription based on that alone, but then the fact that you went way over and above and were so thorough and so detailed and did such an excellent analysis that I’d get two subscriptions if I could! This was the first video of yours that I’ve seen. I will be watching more. Thank you so much!

@milstv178 3 ай бұрын

Same

@adrianbarac3063 2 ай бұрын

Hear here! This is a terrific explainer. Nicely done.

@DiggitySchwag 3 ай бұрын

Commenting for the algorithm cause this is by far the best video out there on sound panels.

@likelydaily6767 3 ай бұрын

Agreed. And I’ll be using the methods at the start of the video for ceiling panels cause it just makes sense.

@kaertei5784 3 ай бұрын

Agreed, commenting for the same reason

@KashTagg 2 ай бұрын

Going with the 703, but have an idea to fix the imperfections or at least hide them...frame the panels with Cardboard. Salute to you Walt, I've done overly extensive research on and off for the last few years, never quite finding a perfect/cheap DIY solution...until watching this video. You answered every question I had before i got a chance to google it. Thank you Thank you Thank you

@venue1230 13 күн бұрын

I really appreciate you putting this video together. Super helpful.

@raybp7512 21 күн бұрын

A note for anyone making this in the future (Especially if you arent in USA) once you factor in price of Impaler clips, Cloud anchors, a few cans of Spray adhesive and the Fibreglass paint this isnt cheaper than going the wood panel route

@theyetilife 5 күн бұрын

Awesome job, I dig the fabric wrap and custom designs.

@ChatPatwah 5 ай бұрын

You're a Godsend brother...this is exactly what I'm going to do. I appreciate you.

@waltsreviews90 5 ай бұрын

Glad I could help

@rons3486 4 ай бұрын

This video was excellent on all fronts... From the cost analysis to the how-to section. Thanks for this!

@wiseview1444 11 ай бұрын

Indeed, best video on the subject on the internet right now! Impressive! Thank you!

@rezasafaie6396 9 ай бұрын

Thanks . For sure the best and most cost effective method .

@davidgossett5743 Жыл бұрын

Hands down, best video in this category! I will be using these materials and techniques in my upcoming project. THANK YOU

@theyetilife 5 күн бұрын

Regarding at time 9:30, NRC is the noise reduction coefficient. Reason conflicting data is that in ASTmC423 the RC rating is always rounded up to nearest 0.5, reason why it has NRC 1.05. Anything above 1 is 100% absorbing average, between 250 Hz to 2000 hertz. First NRC results, 250 Hz was at 0.71, whereby the 2nd NRC detail 250 Hz was at 0.78 which is why the first detail has a lower NRC at 0.95. This most likely from two different tests, showing that test retest reliability is off by about 10 but in reality the difference is negligible. Depending on the application, I look at the lower frequencies, with the thicker the absorptive material, the better it has at lower the frequencies. AS you had the panels on standoffs also increased their absorptive efficiency and NRC.

@sovka8394 4 ай бұрын

The most valuable DIY acoustic panels vid I have found. I am not using the frames for sure. Too much hassle 😌

@katiewiley2054 Жыл бұрын

Wow, thank you. This is exactly what I'm looking to do. My kids are starting up a garage band in our garage and I need some simple diy sound panels that I can make myself without tools, so this is awesome. You explained everything so well, thank you!

@andrewwehrlen5606 Ай бұрын

Amazing...never thought simply covering a panel like this!

@zoeydionne6378 5 ай бұрын

Thanks for the video! I love the idea of not using wood frames so they are a lot lighter weight for hanging on my ceiling.

@feelthepeace 4 ай бұрын

Excellent video - you did all the research and work - layed it out brilliantly. Super appreciate you/this video! Thank you SO MUCH!!!

@waltsreviews90 4 ай бұрын

Glad it was helpful!

@falconaz 6 ай бұрын

Really good video. I'm building a large garage, 30' x 40', with 10' walls. We used a scissor truss to give us a vaulted ceiling. The walls and ceiling are plastered. You would not believe the echo. I'm going to have to do something to address it. This looks like an excellent solution.

@BaconCruiser Ай бұрын

Holy hell where do they have awesome garages like this? Those on exist in multimillion dollar homes where I live.

@meljohnson5579 27 күн бұрын

Beyond Excellent 😊

@ahhotep1833 3 ай бұрын

Excellent vid full of useful info. The best I have come across. Thank You! new sub here!

@vibeinstalls9890 6 ай бұрын

Thanks bud , very helpful and well done.

@waltsreviews90 5 ай бұрын

No problem 👍

@eliojimenez3430 Жыл бұрын

What measurements did you use for the fabric on those panels? I was confused when you were saying by the yard, is that the width?

@paulmason828 5 ай бұрын

Good information.

@waltsreviews90 5 ай бұрын

Thanks

@leem1914 7 ай бұрын

Brilliant!. Could I used these as Bass Traps by mounting them in a corner at a diagonal leaving the air space behind? Thank you.

@quaz3294 7 ай бұрын

Great content man. My 2cents from experience: the frameless coating works. Yes u gonna need more than suggested. Also 705 dont come in 4 in thick from most sellsers...i coulbe wrong but its hard to find. . Also u sprayed the whole panel with adhesive. 😂. Spay just the sides with adhesive.

@stevesells9545 5 ай бұрын

I see 705 in 4 inch in stock online, plenty of it

@quaz3294 5 ай бұрын

@@stevesells9545 where? What's the website?

@ChesterMan-qd3xj 8 күн бұрын

Been thinking of DIY acoustic panels, and wondered why there couldn’t be a solution without a frame. Not that I couldn’t make one, but why would I mess with it if I don’t have to? Thank you!

@RKM33 7 ай бұрын

Approximately how much does each panel weigh? Do you think they would stay up using a few of those 3M plastic velcro type tabs to avoid the need to put holes in the wall? Thanks! Great video!

@RockTo11 Ай бұрын

I am wondering if the spray glue on the front might impact the sound absorption.

@jeffkerzner6254 2 ай бұрын

This is a really helpful video! I have textiles from all over. Is it possible to use hand woven cotton textiles, for example, something like bogolan mud cloth from Mali or Kente cloth from Ghana?

@vrta 4 ай бұрын

Hey Walt, thanks for an awesome video! I'm thinking of making some for my new place but I have one fear: Do the panels "leak" any glassfiber/stonewool through the fabric over time?

@revelashan 8 ай бұрын

Amazing. Absolutely awesome. Thanks to you, I just purchased two packs of 705 from acoustimac! I can't thank you enough. I have one question, what size print did you buy from Big Wall Decor? The fabric you got from them fit your panel perfectly.

@trebep 3 ай бұрын

Same question. Was just on their site and it looks like the sizes don’t align exactly.

@torryjermaineoverstreet5948 2 ай бұрын

I like this video

@troywakeman Ай бұрын

I saw you had a OC 703 4" panel in there at 18:06. Is that also frameless? Can it be hung to the ceiling?

@XXchillpanda 3 ай бұрын

🔥🔥🔥

@michealhand1001 24 күн бұрын

Hello Walt Could you test out how to Reduce the DB levels on a mitre Saw one Source besides the motor is the Blade which is like a Cymbal from a Drumkit which rings every time you lift the Blade after cutting your cut.

@wealthgenerationstrategies 3 ай бұрын

Great video but really tough to find this stuff in western Canada.

@paull8753 4 ай бұрын

Does the glue decrease the acoustic performance at all?

@SpliffMeister3000 20 күн бұрын

The 703 / 705 edges are always damaged so this works if you're ok with janky edges that aren't clean

@MrLesman60 4 ай бұрын

is this same with rockwool ?

@cnkosm6536 Жыл бұрын

Thanks for the video. I want to make a frameless acoustic panel like yours but I'm thinking of sewing the fabric onto the fiberglass, rather than glueing it with adhesive spray. I know it will be a lot of work with the needle and the thread, but wouldn't it be better that way? Because glueing all sides of the fiberglass would make it stiffer and maybe reduce its absorbing quality... What do you think??

@waltsreviews90 Жыл бұрын

I don't think stiffness effects the acoustic properties. I say that because fiberglass boards and way stiffer than mineral wool but comparable in noise absorption. So not sure if the extra time is worth it for functionality, but if you prefer the look or method, its not a bad idea.

@maodanz1672 7 ай бұрын

Thinking of building a wall above a wall lots of notching maybe tape maybe paint after? foil backed might look ok Easier than fabric

@dk4wncp 5 ай бұрын

Can you paraphrase? I think you doubled up some words.

@ezequieliraolagoitia2811 5 ай бұрын

That´s great. Let me as you something. It´s a good idea to put it in the ceiling to reduce echo? =)

@cTothy 2 ай бұрын

So no need for the edge coating on the 705?

@michaelyork5617 2 ай бұрын

GREAT video! I will be building panels this weekend based on this video. Question - I would like 4" panels for better low frequency treatment. Can I sandwich two Owen's Corning 705 2'x4'x2" panels or would I be better off with Owens Corning 703 4" panels? I am unable to find 705 panels 4" wide, but I'm thinking the 705 panels being more dense would be better than a 4" 703 panel?

@troywakeman Ай бұрын

Hey what did you end up going with and how'd it work out?

@michaelyork5617 Ай бұрын

I posted what I did in another comment a few days later. I did build 4” panels. They seem to work well but I don’t have a way to validate with data.

@ryan52403 5 ай бұрын

Did you compare this to using a 3" EPS insulation board? Also rigid and fairly inexpensive...

@markpurol8385 Жыл бұрын

Please clarify a mistake made around the 12:12 time of the video comparing the edges of two different panels, when you call them both OC705. Did you mean to say the panel on the left is OC705 without edge coating and the panel on the right is OC703 with edge coating?

@waltsreviews90 Жыл бұрын

Thanks for pointing that out. Yes the softer one was the 703 with edge coating on it, and the firmer one was the 705 without edge coating.

@dk4wncp 5 ай бұрын

Thank you, was just going to ask for clarification on this!

@dk4wncp 5 ай бұрын

And thank you @Waltsreviews for the correction; I noticed there were a couple of other slip ups that you didn't correct too. Just a friendly suggestion to listen critically before final uploading. Cheers and thank you for the weekend project!

@Andrew-yf3lu 2 жыл бұрын

Thanks for the video. Will it help insulate your house too?

@waltsreviews90 2 жыл бұрын

a little bit, but not much IMO

@TurboLoveTrain Ай бұрын

Opens with "save money while being lazy" I'm in. I'm building a frame type because and I've come to find out you can usually ask the lumber department in your local lows-type store if they have any scraps for sale on discount... Step zero: material acquisition XD

@andrewwehrlen5606 Ай бұрын

How many cans of 77 for say...5 panels do ya think?

@lancecooperphotos Ай бұрын

The cost of these has more than doubled since this great video was made. Amazon has the 703 at $125 for 12 one inch with free shipping. Considering gluing two together making it two inches thick. Any thoughts on this?

@chuckmerrill4997 26 күн бұрын

It would work just as well as single 2” thick pieces. And if you’re thinking of using frames you wouldn’t need to bother gluing it.

@MonaetSham Жыл бұрын

Is it safe to install these panels in a bedroom? I noticed that you were wearing a mask when handling the fiberglass panels. Does the fabric do a good job at containing the fibers?

@waltsreviews90 Жыл бұрын

We didn't notice much fiberglass getting kicked up. Masks were largely worn because we were using spray adhesive. It's still probably a good idea to wear a mask when dealing with fiberglass panels, but you should be safe once they have fabric wrapped around them.

@fasterthanaturtle 3 ай бұрын

Couldn't you just mix black dye with alcohol and spray it! The glue for wrapping it will block the absorption to some degree

@rich6081 5 ай бұрын

Its been my experience that you are going to have to use at least2 coats of M77

@tdtdtd1826 Ай бұрын

No way rockwool or fibreglass are the top choice..the cheapest and have highest nrr is the humble EPE or polyester fiber

@GigiUK 4 ай бұрын

Both the edge-coating and spray are actually quite detrimental to the acoustic qualities because they don't absorb sound, it reflects and bounces off. I don't recommend doing this, omggg. You defeated the insulation's own purpose 😂🤣 And, no air gap between the wall and the panel? There should be an air gap that's the same depth as the acoustic panel for maximum efficiency - you did it on the ceiling, but the gap is too large. Even though your room may sound better to you, it has probably lost 80% potential absorption

@MrStupidHead 2 ай бұрын

Wouldn't a frame have the same negative as gluing the sides?

@GigiUK 2 ай бұрын

@@MrStupidHead Yes, of course, and I always shake my head at the amount of wood that people bring into the room for "soundproofing". If these people were to lay flat all of the wood that they bought, they will be able to see that it will take up a large amount of square footage - a wooden mirror, if you will. My idea is less than perfect, but what I do to combat the wooden mirror effect is put tiny spots of glue onto my frames and then place foam on top to at least help minimise any sound waves that could bounce off by absorbing some of them instead. I then wrap the fabric over the top to conceal the acoustic foam. I’m no rocket scientist, but I’m sure that I was able to create a far better room for myself than having any wood exposed. Any smooth surface will reflect sound, and so I recommend periodically assessing the room because new objects keep appearing because, let’s face it, we like buying toys 😂

@mrjeffrey43 2 ай бұрын

Wonder if staples all along the back edge to secure the fabric would would be a better solution, instead of glue?